kSIST FprEN ISO 3262-10:2023
(Main)Extenders - Specifications and methods of test - Part 10: Natural talc/chlorite in lamellar form (ISO/FDIS 3262-10:2023)
Extenders - Specifications and methods of test - Part 10: Natural talc/chlorite in lamellar form (ISO/FDIS 3262-10:2023)
This document specifies requirements and corresponding methods of test for products made from naturally occurring talc/chlorite in lamellar form.
Füllstoffe - Anforderungen und Prüfverfahren - Teil 10: Verwachsungen von natürlichem plättchenförmigen Talk und Chlorit (ISO/FDIS 3262-10:2023)
Dieses Dokument legt Anforderungen und die entsprechenden Prüfverfahren für Produkte aus natürlich vorkommendem, plättchenförmigen Talk/Chlorit fest.
Matières de charge - Spécifications et méthodes d'essai - Partie 10: Mélange talc/chlorite naturel sous forme lamellair (ISO/FDIS 3262-10:2023)
La présente partie de l'ISO 3262 prescrit les spécifications et les méthodes d'essai correspondantes pour les produits préparés à partir de talc et de chlorite naturels sous forme lamellaire.NOTE Les classes minéralogiques ont été fixées en fonction des produits disponibles sur le marché (voir annexe A).
Polnila - Specifikacije in preskusne metode - 10. del: Naravni talk/klorit v obliki lamel (ISO/FDIS 3262-10:2023)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN ISO 3262-10:2023
01-maj-2023
Polnila - Specifikacije in preskusne metode - 10. del: Naravni talk/klorit v obliki
lamel (ISO/DIS 3262-10:2023)
Extenders - Specifications and methods of test - Part 10: Natural talc/chlorite in lamellar
form (ISO/DIS 3262-10:2023)
Füllstoffe - Anforderungen und Prüfverfahren - Teil 10: Verwachsungen von natürlichem
plättchenförmigen Talk und Chlorit (ISO/DIS 3262-10:2023)
Matières de charge - Spécifications et méthodes d'essai - Partie 10: Mélange talc/chlorite
naturel sous forme lamellaire (ISO/DIS 3262-10:2023)
Ta slovenski standard je istoveten z: prEN ISO 3262-10
ICS:
87.060.10 Pigmenti in polnila Pigments and extenders
oSIST prEN ISO 3262-10:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 3262-10:2023
---------------------- Page: 2 ----------------------
oSIST prEN ISO 3262-10:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 3262-10
ISO/TC 256 Secretariat: DIN
Voting begins on: Voting terminates on:
2023-03-09 2023-06-01
Extenders — Specifications and methods of test —
Part 10:
Natural talc/chlorite in lamellar form
ICS: 87.060.10
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 3262-10:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
---------------------- Page: 3 ----------------------
oSIST prEN ISO 3262-10:2023
ISO/DIS 3262-10:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 3262-10
ISO/TC 256 Secretariat: DIN
Voting begins on: Voting terminates on:
Extenders — Specifications and methods of test —
Part 10:
Natural talc/chlorite in lamellar form
ICS: 87.060.10
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 3262-10:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
© ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
---------------------- Page: 4 ----------------------
oSIST prEN ISO 3262-10:2023
ISO/DIS 3262-10:2023(E)
Contents Page
Foreword .iv
1 Scope .1
2 Normative references .1
3 Terms and definitions .1
4 Requirements and test methods .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.