SIST EN 27436:2002

Slotted set screws with cup point (ISO 7436:1983)

Specifies the characteristics of products with metric dimensions and thread sizes from M 1,6 up to and including M 12 and product grade A; includes specifications with reference to International Standards; tabulates thread sizes M 1,6 up to M 12 with nominal lengths from 2 mm up to 60 mm; gives an example for the designation.

Gewindestifte mit Schlitz und Ringschneide (ISO 7436:1983)

Vis sans tete, fendues, a bout cuvette (ISO 7436:1983)

La présente Norme internationale spécifie les caractéristiques des vis sans tête, fendues, à bout cuvette, de diamètre nominal de filetage M 1,6 à M 12 inclus et de grade A. Si d'autres spécifications sont requises, il est recommandé de les choisir dans les Normes internationales existantes, par exemple ISO 261, ISO 888, ISO 898, ISO 965, ISO 3506, 4759/1.

Navojni zatiči z zarezo in končino z obročastim rezilom (ISO 7436:1983)

General Information

• Status: Published
• Publication Date: 31-Aug-2002
• ICS: 21.060.10 - Bolts, screws, studs
• Technical Committee: ISEL - Mechanical elements
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Sep-2002
• Due Date: 01-Sep-2002
• Completion Date: 01-Sep-2002
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: EN 27436:1992 - Slotted set screws with cup point (ISO 7436:1983)

Relations

• Revises: oSIST prEN ISO 7436:2023 - Fasteners - Slotted set screws with cup point (ISO/DIS 7436:2023)
• Effective Date: 19-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Gewindestifte mit Schlitz und Ringschneide (ISO 7436:1983)Vis sans tete, fendues, a bout cuvette (ISO 7436:1983)Slotted set screws with cup point (ISO 7436:1983)21.060.10Sorniki, vijaki, stebelni vijakiBolts, screws, studsICS:Ta slovenski standard je istoveten z:EN 27436:1992SIST EN 27436:2002en01-september-2002SIST EN 27436:2002SLOVENSKI
STANDARD



SIST EN 27436:2002



SIST EN 27436:2002



SIST EN 27436:2002



International Standard 7436 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.ME~YHAßO~HA~ OP~AHH3AlUlR fl0 CTAHJWTM3AIJMM@ORGANISATlON INTERNATIONALE DE NORMALISATION Slotted set screws with cup Point Vis sans t&e, fendues, A bout cuvette First edition - 1963-09-01 U DC 621 l 82.219.4.092.6 Ref. No. ISO 7436-1983 (E) Descriptors : fasteners, screws, slotted headless screws, dimensions, specifications, designation l Price based on 3 pages SIST EN 27436:2002



Foreword ISO (the International Organization for Standardization) is a worldwide federation of national Standards bodies (ISO member bedies). The work of developing International Standards is carried out through ISO technical committees. Every member body interested in a subject for which a technical committee has been authorized has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take patt in the work. Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. International Standard ISO 7436 was developed by Technical Committee ISO/TC 2, Fasteners, and was circulated to the member bodies in December 1981. lt has been approved by the member bodies of the following countries: Austria Belgium Brazil China Czechoslovakia Denmark Egypt, Arab Rep. Finland France Germany, F. R. of Hungary India Ireland Japan Korea, Dem. P. Rep. of Korea, Rep. of Mexico Netherlands New Zealand Norway No member body expressed disapproval of the document. 0 International Organkation for Standardkation, 1983 Poland Romania South Africa, Rep. of Spain Sri Lanka Sweden Switzerland United Kingdom USSR Printed in Switzerland SIST EN 27436:2002



INTERNATIONAL STANDARD ISO 74364983 (El Slotted set screws with cup Point 1 Scope and field of application This International Standard specifies the characteristics of slotted set screws with cup Point and thread sizes from M 1,6 to M 12 inclusive and product grade A. If other specifications are required, it is recommended that they should be selected from existing International Standards, for example ISO 261, ISO 888, ISO 898, ISO 965, ISO 3566, ISO 4759/1. 2 References ISO 225, Fasteners - Belts, screws, studs and nuts - Symbols and designa tions o f dimensions. ISO 261, ISO general p
...