SIST EN ISO 182-3:2001

Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 3: Conductometric method (ISO 182-3:1993)

The principle of the method is maintaining a test portion of the PVC at an agreed temperature in a nitrogen gas stream, absorbing the hydrogen chloride evolved in a given amount of demineralized water, and potentiometrically determining the amount of hydrogen chloride evolved in relation to the recorded change in conductivity of the water. The method is recommended for compounded PVC materials and products only, although it can be used for polymers in powder form under appropriate conditions.

Kunststoffe - Bestimmung der Neigung von Formmassen und Erzeugnissen auf der Basis von Vinyl-chlorid-Homopolymeren und -Copolymeren, bei erhöhten Temperaturen Chlorwasserstoff und andere saure Produkte abzugeben - Teil 3: Leitfähigkeitsverfahren (ISO 182-3:1993)

Dieser Teil von ISO 182 legt ein Verfahren zur Bestimmung der thermischen Stabilität bei erhöhter Temperatur von Formmassen und Erzeugnissen fest, die auf der Grundlage von Vinylchlorid-Homopolymeren und -Copolymeren (im folgenden Text abgekürzt als PVC) hergestellt sind und die zum Chlorwasserstoffverlust neigen (Entwicklung von Chlorwasserstoff). Das Verfahren kann zur Qualitätskontrolle während der Herstellung und Umwandlung von PVC-Formmassen angewendet werden.

Plastiques - Détermination de la tendance des compositions a base d'homopolymeres et copolymeres du chlorure de vinyle a dégager du chlorure d'hydrogene et éventuellement d'autres produits acides a températures élevées - Partie 3: Méthode conductimétrique (ISO 182-3:1993)

Polimerni materiali - Ugotavljanje tendence zmesi in proizvodov na osnovi homo- in kopolimerov vinilklorida, da pri povišanih temperaturah sproščajo klorovodik ali druge kisle produkte - 3. del: Konduktometrijska metoda (ISO 182-3:1993)

General Information

• Status: Withdrawn
• Publication Date: 31-May-2001
• Withdrawal Date: 07-Jan-2024
• ICS: 83.080.20 - Thermoplastic materials
• Technical Committee: IPMA - Polimer materials and products
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 05-Jan-2024
• Due Date: 28-Jan-2024
• Completion Date: 08-Jan-2024
• Ref Project: EN ISO 182-3:2000 - Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 3: Conductometric method (ISO 182-3:1993)

Relations

• Replaces: SIST ISO 182-3:1996 - Plastics -- Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures -- Part 3: Conductometric method
• Effective Date: 01-Jun-2001
• Revises: SIST EN ISO 182-3:2024 - Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 3: Conductometric method (ISO 182-3:2023)
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 182-3:2001
01-junij-2001
3ROLPHUQLPDWHULDOL8JRWDYOMDQMHWHQGHQFH]PHVLLQSURL]YRGRYQDRVQRYLKRPR
LQNRSROLPHURYYLQLONORULGDGDSULSRYLãDQLKWHPSHUDWXUDKVSURãþDMRNORURYRGLNDOL
GUXJHNLVOHSURGXNWHGHO.RQGXNWRPHWULMVNDPHWRGD,62
Plastics - Determination of the tendency of compounds and products based on vinyl
chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic
products at elevated temperatures - Part 3: Conductometric method (ISO 182-3:1993)
Kunststoffe - Bestimmung der Neigung von Formmassen und Erzeugnissen auf der
Basis von Vinyl-chlorid-Homopolymeren und -Copolymeren, bei erhöhten Temperaturen
Chlorwasserstoff

und andere saure Produkte abzugeben - Teil 3: Leitfähigkeitsverfahren (ISO 182-3:1993)
Plastiques - Détermination de la tendance des compositions a base d'homopolymeres et
copolymeres du chlorure de vinyle a dégager du chlorure d'hydrogene et éventuellement
d'autres produits acides a températures élevées - Partie 3: Méthode conductimétrique
(ISO 182-3:1993)
Ta slovenski standard je istoveten z: EN ISO 182-3:2000
ICS:
83.080.20 Plastomeri Thermoplastic materials
SIST EN ISO 182-3:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 182-3:2001

---------------------- Page: 2 ----------------------

SIST EN ISO 182-3:2001

---------------------- Page: 3 ----------------------

SIST EN ISO 182-3:2001

---------------------- Page: 4 ----------------------

SIST EN ISO 182-3:2001

---------------------- Page: 5 ----------------------

SIST EN ISO 182-3:2001
INTERNATIONAL IS0
STANDARD 182-3
First edition
1993-04-01
Plastics - Determination of the tendency
of compounds and products based on vinyl
chloride homopolymers and copolymers to
evolve hydrogen chloride and any other
acidic products at elevated
temperatures -
Part 3:
Conductometric method
Plas tiques - 06termination de la tendance des compositions 2 base
d ’homopolym&es et copolym&res du chlorure de vinyle ;i dkgager du
chlorure d ’hydrogkne et 6ventuellement d ’autres produits acides 9
temperatures 6lev6es -
Par-tie 3: Mkthode conductim&rique
Reference number
IS0 182-3:1993(E)

---------------------- Page: 6 ----------------------

SIST EN ISO 182-3:2001
IS0 182=3:1993(E)
Foreword
IS0 (the International Organization for Standardization) is a worldwide
federation of national standards bodies (IS0 member bodies). The work
of preparing International Standards is normally carried out through IS0
technical committees. Each member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. IS0
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard IS0 182-3 was prepared by Technical Committee
lSO/TC 61, Plastics, Sub-Committee SC 6, Ageing, chemical and environ-
mental resistance.
Together with the three other parts of IS0 182, it cancels and replaces IS0
Recommendation R 182:1970, of which the four parts of IS0 182 consti-
tute a technical revision.
IS0 182 consists of the following parts, under the general title
Plastics - Determination of the tendency of compounds and products
based on vinyl chloride homopolymers and copolymers to evolve hydrogen
chloride and any other acidic products at elevated temperatures:
- Part 1: Congo red method
- Part 2: pH method
- Part 3: Conductometric method
- Part 4: Po tentiometric method
Annexes A, B and C of this part of IS0 182 are for information only.
0 IS0 1993
All rights resewed. No part of this publication may be reproduced or utilized in any form or
by any means, electronic or mechanical, including photocopying and microfilm, without per-
mission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-1211 Geneve 20 l Switzerland
Printed in Switzerland
ii

---------------------- Page: 7 ----------------------

SIST EN ISO 182-3:2001
INTERNATIONAL STANDARD IS0 182=3:1993(E)
Plastics - Determination of the tendency of
compounds and products based on vinyl chloride
homopolymers and copolymers to evolve hydrogen
chloride and any other acidic products at elevated
temperatures -
Part 3: -
Conductometric method
WARNING - The use of this part of IS0 182 may involve hazardous materials, operations and
equipment. This part of IS0 182 does not purport t
...