SIST EN 2693:2005

Aerospace series - Aluminium alloy AL-P5086-H111 - Sheet and strip - 0,3 mm <a <6 mm

This standard specifies the requirements relating to:
Aluminium alloy AL-P5086-
H111
Sheet and strip
0,3 mm < or = a < or = 6 mm
for aerospace application.

Luft- und Raumfahrt - Aluminiumlegierung AL-P5086-H111 - Bleche und Bänder - 0,3 mm <a <6 mm

Diese Norm legt die Anforderungen an
Aluminiumlegierung AL-P5086-
H111
Bleche und Bänder
0,3 mm >= a >= 6 mm
für Anwendungen in der Luft- und Raumfahrt fest.

Série aérospatiale - Alliage d'aluminium AL-P5086-H111 - Tôles et bandes - 0,3 mm <a <6 mm

Aerospace series - Aluminium alloy AL-P5086-H111 - Sheet and strip - 0,3 mm <a <6 mm

General Information

• Status: Published
• Publication Date: 31-Oct-2005
• ICS: 49.025.20 - Aluminium
• Technical Committee: SS SPL - Technical Board for the general field
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Nov-2005
• Due Date: 01-Nov-2005
• Completion Date: 01-Nov-2005
• Ref Project: EN 2693:2005 - Aerospace series - Aluminium alloy AL-P5086-H111 - Sheet and strip - 0,3 mm <a <6 mm

Relations

• Replaces: SIST EN 2693:2001 - Aerospace series - Aluminium alloy AL-P5086-H111 - Sheet and strip 0,3 mm <= a <= 6 mm
• Effective Date: 22-Dec-2008
• Refers: SIST EN 4258:2024 - Aerospace series - Metallic materials - General organization of standardization - Link between types of European Standards and their use
• Effective Date: 28-Jan-2026
• Referred By: SIST EN 4811:2017 - Aerospace series - Flange couplings - Gasket seal with fluorocarbon seal on aluminium plate with 4 fastening holes - Inch series
• Effective Date: 28-Jan-2026
• Referred By: SIST EN 4809:2017 - Aerospace series - Flange couplings - Gasket seal with fluorocarbon seal on aluminium plate with 3 fastening holes - Inch series
• Effective Date: 28-Jan-2026
• Referred By: SIST EN 4115:2010 - Aerospace series - Cushion, rubber for clamps - Dimensions, masses
• Effective Date: 28-Jan-2026
• Referred By: SIST EN 4114:2010 - Aerospace series - Clamps, loop (''P'' type) in aluminium alloy with rubber cushioning - Dimensions, masses
• Effective Date: 28-Jan-2026
• Referred By: SIST EN 3730:2009 - Aerospace series - Clamps, saddle fixed and sliding version in aluminium alloy with rubber cushioning - Dimension, masses
• Effective Date: 28-Jan-2026

Overview

SIST EN 2693:2005 is a key European standard developed by CEN (European Committee for Standardization), specifying requirements for aluminium alloy AL-P5086-H111 sheet and strip with thicknesses from 0.3 mm to 6 mm. This standard is created for aerospace applications and outlines the chemical composition, delivery condition, technical requirements, and associated inspection and testing procedures to ensure material suitability for critical aerospace structures.

This standard supersedes EN 2693:1993 and serves manufacturers, suppliers, and engineers in the aerospace sector, ensuring harmonized material quality and compliance across European and international supply chains.

Key Topics

• Material Specification: SIST EN 2693:2005 focuses on AL-P5086-H111, a non-heat-treatable aluminium-magnesium alloy known for excellent corrosion resistance and moderate strength, especially in marine and aerospace applications.
• Dimensional Range: The standard covers aluminium sheets and strips from 0.3 mm up to and including 6 mm in thickness.
• Delivery Condition: Materials must be delivered in the H111 condition, which means they have been strain hardened but are thermally stabilized.
• Normative References: Compliance is aligned with technical specifications set out in EN 4400-2 and follows the general organization of metallic materials for aerospace (EN 4258) and the rules for material standards (EN 4500-2).
• Testing and Inspection: Requirements for testing, including intergranular corrosion, external defect assessment, and dimensional inspection, are referenced to EN 4400-2.
• Marking and Qualification: Requirements for product marking, inspection, and qualification procedures are integral to ensure traceability and material performance.

Applications

SIST EN 2693:2005 plays a crucial role in the aerospace industry, particularly for components and assemblies where corrosion resistance and appropriate strength-to-weight ratio are critical. Typical applications include:

• Aircraft structures: Fuselage skins, wing panels, and other primary airframe elements.
• Interior aerospace parts: Panels, insulation supports, and bracketry.
• Marine aerospace environments: Components exposed to marine atmospheres due to the alloy’s corrosion resistance.
• Precision engineering: Use in spaces where tight tolerances and high-quality surface finishes are required.

By defining strict requirements for chemical composition, mechanical properties, and delivery conditions, SIST EN 2693:2005 ensures uniformity and reliability of materials used in high-performance aerospace environments.

Related Standards

To ensure comprehensive compliance and quality throughout the supply chain, several related standards should be consulted alongside SIST EN 2693:2005:

• EN 4258: Aerospace series - Metallic materials - General organization of standardization - Links between types of EN standards and their use.
• EN 4400-2: Aerospace series - Aluminium and aluminium alloy wrought products - Technical specification - Part 2: Sheet and strip.
• EN 4500-2: Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 2: Specific rules for aluminium, aluminium alloys, and magnesium alloys.

These standards together create a robust framework for the specification, production, quality assurance, and documentation of materials used in aerospace applications.

In summary, SIST EN 2693:2005 is essential for the standardized procurement, manufacturing, and implementation of aluminium alloy AL-P5086-H111 sheet and strip, supporting the safety, reliability, and durability required in aerospace engineering.

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2005
1DGRPHãþD
SIST EN 2693:2001
Aerospace series - Aluminium alloy AL-P5086-H111 - Sheet and strip - 0,3 mm <6 mm
Aerospace series - Aluminium alloy AL-P5086-H111 - Sheet and strip - 0,3 mm mm
Luft- und Raumfahrt - Aluminiumlegierung AL-P5086-H111 - Bleche und Bänder - 0,3
mm Série aérospatiale - Alliage d'aluminium AL-P5086-H111 - Tôles et bandes - 0,3 mm <6 mm
Ta slovenski standard je istoveten z: EN 2693:2005
ICS:
49.025.20 Aluminij Aluminium
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 2693
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2005
ICS 49.025.20 Supersedes EN 2693:1993
English version
Aerospace series - Aluminium alloy AL-P5086-H111 - Sheet and
strip - 0,3 mm ≤a ≤6 mm
Série aérospatiale - Alliage d'aluminium AL-P5086-H111 - Luft- und Raumfahrt - Aluminiumlegierung AL-P5086-
Tôles et bandes - 0,3 mm ≤a ≤6 mm H111 - Bleche und Bänder - 0,3 mm ≤a ≤6 mm
This European Standard was approved by CEN on 22 April 2005.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning
such national standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status
as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2693:2005: E
worldwide for CEN national Members.

Foreword
This document (EN 2693:2005) has been prepared by the European Association of Aerospace
Manufacturers - Standardization (AECMA-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
AECMA, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by December 2005, and conflicting national standards shall be withdrawn
at the latest by December 2005.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 2693:1993.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
co
...