SIST ISO 1060-1:1996

Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Part 1: Designation

Plastiques -- Résines d'homopolymères et de copolymères de chlorure de vinyle -- Partie 1: Désignation

Polimerni materiali - Homo- in kopolimeri vinilklorida - 1. del: Označevanje

General Information

• Status: Withdrawn
• Publication Date: 31-May-1996
• Withdrawal Date: 30-Apr-2000
• ICS: 83.080.20 - Thermoplastic materials
• Technical Committee: IPMA - Polimer materials and products
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 01-May-2000
• Due Date: 01-May-2000
• Completion Date: 01-May-2000
• Ref Project: ISO 1060-1:1982 - Plastics — Homopolymer and copolymer resins of vinyl chloride — Part 1: Designation

Relations

• Replaced By: SIST EN ISO 1060-1:2000 - Plastics - Homopolymer and copolymer resins of vinyl chloride - Part 1: Designation system and basis for specifications (ISO 1060-1:1998)
• Effective Date: 01-May-2000

Standards Content (Sample)

International Standard @ 1060l1
INTERNATIONAL ORGANIZATION FOR STANDARDlZATION*ME&lYHAPO~HAR OPrAHHJAL(MR fl0 CTAHflAF'TH3AUMM.ORGANlSATlON INTERNATIONALE DE NORMALISATION
Plastics - Homopolymer and copolymer resins of vinyl
\-
chloride -
Part 1 : Designation
Plastiques - Résines d'homopolymères et de copolymères de chlorure de vinyle - Partie 1 : Désignation
First edition - 1982-03-01
-
e UDC 678.743.22-13 Ref. No. IS0 1060/1-1982 (E)
8 7
Descriptors : plastics, thermoplastic resins, vinyl chloride, designation.
O
E Price based on 5 Pages

---------------------- Page: 1 ----------------------
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards institutes (IS0 member bodies). The work of developing Inter-
IS0 technical committees. Every member
national standards is carried out through
body interested in a subject for which a technical committee has been set up has the
right to be represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work.
Draft Intertïational Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the IS0 Council.
International Standard IS0 1060/1 was developed by Technical Committee ISO/TC 61,
PlasfiCs, and was circulated to the member bodies in June 1980.
It has been approved by the member bodies of the following countries:
Australia France Poland
Germany, F.R. Romania
Austria
Belgium Hungary South Africa, Rep. of
Brazil India Spain
Ireland Sweden
Canada
China Italy Switzerland
Czechoslovakia Japan USA
Egypt, Arab Rep. of Korea, Rep. of USSR
Finland Mexico
The member body of the following country expressed disapproval of the document on
technical grounds :
Netherlands
This International Standard cancels and replaces International Standards
IS0 1060-1975 and IS0 2798-1974, of which it constitutes a technical revision.
O International Organization for Standardization, 1982 O
Printed in Switzerland

---------------------- Page: 2 ----------------------
I N TE R N AT1 O NA L STAN DA R D
Plastics - Homopolymer and copolymer resins of vinyl
chloride -
Part 1 : Designation
3 Definition
1 Scope and field of application
This part of IS0 1060 specifies a method of designation of For the purpose of this International Standard, the following
homopolymer and copolymer resins of vinyl chloride as a func- definition applies :
tion of their chemical nature, their poly(viny1 chloride) content
L
(in the case of the copolymers), their polymerization process,
homopolymer and copolymer resins of vinyl chloride :
their final general utilization, and a number of properties. In-
Resins in powder form consisting respectively of
dications concerning special properties can also be added.
-
a homopolymer of vinyl chloride (CH;! = CHCl mono-
Specifications for specific resins should be based on this
mer) ;
designation.
IS0 1060/2 specifies the preparation of the sample and the test
- a copolymer of vinyl chloride with one or more other
methods to be used for the determination of the properties
monomers, in which vinyl chloride is the main constituent.
specified in this International Standard and of additional pro-
perties.
This powder is intended to be used with the necessary additives
to form a compound used in the production of thermoplastics.
It can have a very low content of non-polymerized substances
2 References
used in the polymerization process (for example emulsifying or
suspension agents, catalyst residues) or deliberately added in
IS0 60, Plastics - Determination of apparent density of
the course of this process as part of the polymerization system
material that can be poured from a specified funnel.
to stabilize the resin (prestabilizers).
ISû 174, Plastics - Homopolymer and copolymer resins of
vinyl chloride - Determination of viscosity number in dilute NOTE - The designation can also be used for homogeneous mixtures,
soh tion. prepared mechanically, of several vinyl chloride homopolymers or of a
homopolymer of vinyl chloride with one or more polymers or copo-
L
lymers of other monomers in which the poly(viny1 chloride) is the main
IS0 1043, Plastics - Symbols.
element, provided that it is clearly shown that the designation refers to
a "mixture".
IS0 106012, Plastics - Homopolymer and copolymer resins of
vinyl chloride - Part 2: Determination of properties.
IS0 1158. Plastics - Homopolymers and copolymers of vinyl
4 Designation system
chloride - Determination of chlorine.
Homopolymer and copolymer resins of vinyl chloride are
IS0 1624, Plastics - Homopolymer and copolymer resins of
designated by the number of this International Standard and
vinyl chloride - Determination of particle size distribution by
3 or 4 data blocks (separated from each other by a comma) pro-
sieve analysis in water.
viding the following information :
IS0 2555, Resins in the liquid state or as emulsions or disper-
sions - Determination of Brookfield RV viscosity.
4.1 Data block 1
IS0 4575, Plastics - Polyvinyl chloride pastes - Determina-
The polymer is identified by its symbol according to IS0 1043.
tion of apparent viscosity using the Severs rheometer.
IS0 4608, Plastics - PVC resins for general use - Determina- For copolymer resins the symbol is followed by an interval, then
tion of plasticizer absorption at room temperature. by a two-digit number indicating the PVC content. The latter is
obtained by determining the chlorine content in accordance
IS0 4612, Plastics - PVC paste resins - Preparation of a with IS0 1158 and using the table in the annex which shows
paste. the relationship between chlorine content and PVC content.
1

---------------------- Page: 3 ----------------------
IS0 1060/1-1982 (E)
preparing a paste conforming to IS0 4612 with a viscosity of
For all resins, after a hyphen, the polymerization process is
about 25 Pa.s.
coded by a letter, as follows :
S : polymerization in suspension
The viscosity is measured under the following conditions
E : polymerization in emulsion
24 h after preparation of the paste;
M : bulk polymerization
conditioning and test temperature: 23 + 1 OC;
X : processes other than above or intermediate. Brookfield RV viscometer (RVF, RVF-100, RVT) ;
rotationai frequency of the spindle : 20 min - 1 ;
4.2 Data block 2
spindle No. 6;
The general end use, coded by a letter as follows
viscosity to be read after 1 min of rotation.
G : general-purpose resins
The value is expressed as a one-digit number, indicating the
class as given in table 1.
P : paste resins.
Table 1
4.3 Data block 3
I Ciasses I 4 I 51 61 71 81 91
The properties to be designated in this data block are as
follows :
- NOTE - Because of the uncertainty arising from the methods of
for all resins, the viscosity number indicated by three
preparing the paste and measuring its viscosity, certain resins may
figures (see 4.3.1);
sometimes appear in one class and sometimes in another. In such
c
...

SLOVENSKI STANDARD
SIST ISO 1060-1:1996
01-junij-1996
3ROLPHUQLPDWHULDOL+RPRLQNRSROLPHULYLQLONORULGDGHO2]QDþHYDQMH
Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Part 1: Designation
Plastiques -- Résines d'homopolymères et de copolymères de chlorure de vinyle -- Partie
1: Désignation
Ta slovenski standard je istoveten z: ISO 1060-1:1982
ICS:
83.080.20 Plastomeri Thermoplastic materials
SIST ISO 1060-1:1996 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 1060-1:1996

---------------------- Page: 2 ----------------------

SIST ISO 1060-1:1996
International Standard @ 1060l1
INTERNATIONAL ORGANIZATION FOR STANDARDlZATION*ME&lYHAPO~HAR OPrAHHJAL(MR fl0 CTAHflAF'TH3AUMM.ORGANlSATlON INTERNATIONALE DE NORMALISATION
Plastics - Homopolymer and copolymer resins of vinyl
\-
chloride -
Part 1 : Designation
Plastiques - Résines d'homopolymères et de copolymères de chlorure de vinyle - Partie 1 : Désignation
First edition - 1982-03-01
-
e UDC 678.743.22-13 Ref. No. IS0 1060/1-1982 (E)
8 7
Descriptors : plastics, thermoplastic resins, vinyl chloride, designation.
O
E Price based on 5 Pages

---------------------- Page: 3 ----------------------

SIST ISO 1060-1:1996
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards institutes (IS0 member bodies). The work of developing Inter-
IS0 technical committees. Every member
national standards is carried out through
body interested in a subject for which a technical committee has been set up has the
right to be represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work.
Draft Intertïational Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the IS0 Council.
International Standard IS0 1060/1 was developed by Technical Committee ISO/TC 61,
PlasfiCs, and was circulated to the member bodies in June 1980.
It has been approved by the member bodies of the following countries:
Australia France Poland
Germany, F.R. Romania
Austria
Belgium Hungary South Africa, Rep. of
Brazil India Spain
Ireland Sweden
Canada
China Italy Switzerland
Czechoslovakia Japan USA
Egypt, Arab Rep. of Korea, Rep. of USSR
Finland Mexico
The member body of the following country expressed disapproval of the document on
technical grounds :
Netherlands
This International Standard cancels and replaces International Standards
IS0 1060-1975 and IS0 2798-1974, of which it constitutes a technical revision.
O International Organization for Standardization, 1982 O
Printed in Switzerland

---------------------- Page: 4 ----------------------

SIST ISO 1060-1:1996
I N TE R N AT1 O NA L STAN DA R D
Plastics - Homopolymer and copolymer resins of vinyl
chloride -
Part 1 : Designation
3 Definition
1 Scope and field of application
This part of IS0 1060 specifies a method of designation of For the purpose of this International Standard, the following
homopolymer and copolymer resins of vinyl chloride as a func- definition applies :
tion of their chemical nature, their poly(viny1 chloride) content
L
(in the case of the copolymers), their polymerization process,
homopolymer and copolymer resins of vinyl chloride :
their final general utilization, and a number of properties. In-
Resins in powder form consisting respectively of
dications concerning special properties can also be added.
-
a homopolymer of vinyl chloride (CH;! = CHCl mono-
Specifications for specific resins should be based on this
mer) ;
designation.
IS0 1060/2 specifies the preparation of the sample and the test
- a copolymer of vinyl chloride with one or more other
methods to be used for the determination of the properties
monomers, in which vinyl chloride is the main constituent.
specified in this International Standard and of additional pro-
perties.
This powder is intended to be used with the necessary additives
to form a compound used in the production of thermoplastics.
It can have a very low content of non-polymerized substances
2 References
used in the polymerization process (for example emulsifying or
suspension agents, catalyst residues) or deliberately added in
IS0 60, Plastics - Determination of apparent density of
the course of this process as part of the polymerization system
material that can be poured from a specified funnel.
to stabilize the resin (prestabilizers).
ISû 174, Plastics - Homopolymer and copolymer resins of
vinyl chloride - Determination of viscosity number in dilute NOTE - The designation can also be used for homogeneous mixtures,
soh tion. prepared mechanically, of several vinyl chloride homopolymers or of a
homopolymer of vinyl chloride with one or more polymers or copo-
L
lymers of other monomers in which the poly(viny1 chloride) is the main
IS0 1043, Plastics - Symbols.
element, provided that it is clearly shown that the designation refers to
a "mixture".
IS0 106012, Plastics - Homopolymer and copolymer resins of
vinyl chloride - Part 2: Determination of properties.
IS0 1158. Plastics - Homopolymers and copolymers of vinyl
4 Designation system
chloride - Determination of chlorine.
Homopolymer and copolymer resins of vinyl chloride are
IS0 1624, Plastics - Homopolymer and copolymer resins of
designated by the number of this International Standard and
vinyl chloride - Determination of particle size distribution by
3 or 4 data blocks (separated from each other by a comma) pro-
sieve analysis in water.
viding the following information :
IS0 2555, Resins in the liquid state or as emulsions or disper-
sions - Determination of Brookfield RV viscosity.
4.1 Data block 1
IS0 4575, Plastics - Polyvinyl chloride pastes - Determina-
The polymer is identified by its symbol according to IS0 1043.
tion of apparent viscosity using the Severs rheometer.
IS0 4608, Plastics - PVC resins for general use - Determina- For copolymer resins the symbol is followed by an interval, then
tion of plasticizer absorption at room temperature. by a two-digit number indicating the PVC content. The latter is
obtained by determining the chlorine content in accordance
IS0 4612, Plastics - PVC paste resins - Preparation of a with IS0 1158 and using the table in the annex which shows
paste. the relationship between chlorine content and PVC content.
1

---------------------- Page: 5 ----------------------

SIST ISO 1060-1:1996
IS0 1060/1-1982 (E)
preparing a paste conforming to IS0 4612 with a viscosity of
For all resins, after a hyphen, the polymerization process is
about 25 Pa.s.
coded by a letter, as follows :
S : polymerization in suspension
The viscosity is measured under the following conditions
E : polymerization in emulsion
24 h after preparation of the paste;
M : bulk polymerization
conditioning and test temperature: 23 + 1 OC;
X : processes other than above or intermediate. Brookfield RV viscometer (RVF, RVF-100, RVT) ;
rotationai frequency of the spindle : 20 min - 1 ;
4.2 Data block 2
spindle No. 6;
The general end use, coded by a letter as follows
viscosity to be read after 1 min of rotation.
G : general-purpose resins
The value is expressed as a one-digit number, indicating the
class as given in table 1.
P : paste resins.
Table 1
4.3 Data block 3
I Ciasses I 4 I 51 61
...