SIST EN 13451-1:2021/oprA1:2023

Swimming pool equipment - Part 1: General safety requirements and test methods for equipment installed in pools for public use

This document specifies general safety requirements and test methods for equipment installed in swimming pools for public use as classified in EN 15288 1 and EN 15288 2.
Where specific standards exist, this general standard is not expected to be used alone.
Special care is expected to be taken in applying this general standard alone to equipment for which no product specific standard has yet been published.

Schwimmbadgeräte - Teil 1: Allgemeine sicherheitstechnische Anforderungen und Prüfverfahren für in öffentlichen Schwimmbädern installierte Schwimmbadgeräte

Équipement de piscine - Partie 1 : Exigences générales de sécurité et méthodes d’essai pour les équipements installés dans des piscines à usage public

Oprema za plavalne bazene - 1. del: Splošne varnostne zahteve in preskusne metode za opremo, vgrajeno v javne plavalne bazene - Dopolnilo A1

General Information

• Status: Not Published
• Public Enquiry End Date: 17-Jul-2023
• ICS: 97.220.10 - Sports facilities
• Technical Committee: SPO - Sports
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 04-May-2023
• Due Date: 21-Sep-2023
• Completion Date: 03-Aug-2023
• Ref Project: EN 13451-1:2020/prA1 - Swimming pool equipment - Part 1: General safety requirements and test methods for equipment installed in pools for public use

Relations

• Amends: SIST EN 13451-1:2021 - Swimming pool equipment - Part 1: General safety requirements and test methods for equipment installed in pools for public use
• Effective Date: 09-Nov-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13451-1:2021/oprA1:2023
01-julij-2023
Oprema za plavalne bazene - 1. del: Splošne varnostne zahteve in preskusne
metode za opremo, vgrajeno v javne plavalne bazene - Dopolnilo A1
Swimming pool equipment - Part 1: General safety requirements and test methods for
equipment installed in pools for public use
Schwimmbadgeräte - Teil 1: Allgemeine sicherheitstechnische Anforderungen und
Prüfverfahren für in öffentlichen Schwimmbädern installierte Schwimmbadgeräte
Équipement de piscine - Partie 1 : Exigences générales de sécurité et méthodes d’essai
pour les équipements installés dans des piscines à usage public
Ta slovenski standard je istoveten z: EN 13451-1:2020/prA1
ICS:
97.220.10 Športni objekti Sports facilities
SIST EN 13451-1:2021/oprA1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 13451-1:2021/oprA1:2023

---------------------- Page: 2 ----------------------
SIST EN 13451-1:2021/oprA1:2023


DRAFT
EUROPEAN STANDARD
EN 13451-1:2020
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
April 2023
ICS 97.220.10
English Version

Swimming pool equipment - Part 1: General safety
requirements and test methods for equipment installed in
pools for public use
Équipement de piscine - Partie 1 : Exigences générales Schwimmbadgeräte - Teil 1: Allgemeine
de sécurité et méthodes d'essai pour les équipements sicherheitstechnische Anforderungen und
installés dans des piscines à usage public Prüfverfahren für in öffentlichen Schwimmbädern
installierte Schwimmbadgeräte
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 136.

This draft amendment A1, if approved, will modify the European Standard EN 13451-1:2020. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMI
...