SIST-TS TS 102 024-3 V4.1.1:2004
(Main)Telecommunications and Internet Protocol Harmonization Over Networks (TIPHON) Release 4; End-to-end Quality of Service in TIPHON Systems; Part 3: Signalling and Control of end-to-end Quality of Service
Telecommunications and Internet Protocol Harmonization Over Networks (TIPHON) Release 4; End-to-end Quality of Service in TIPHON Systems; Part 3: Signalling and Control of end-to-end Quality of Service
The present document, TIPHON signalling and control of end-to-end Quality of Service (QoS), specifies procedures for the control of end-to-end QoS and for the registration and discovery aspects of QoS management within and between domains in a multi-media environment. This includes the control of firewall devices in a secure manner. Annexe A to the present document specifies the TIPHON meta-protocols and object definitions required by these management and control procedures. Additional annexes to the present document define profiles for mapping a number of existing candidates protocols to the specified TIPHON meta-protocols.
Harmonizacija telekomunikacij in internetnega protokola prek omrežij (TIPHON), 4. izdaja - Kakovost storitve od konca do konca v sistemih TIPHON - 3. del: Signalizacija in krmiljenje kakovosti storitve (QoS) od konca do konca
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TS TS 102 024-3 V4.1.1:2004
01-april-2004
Harmonizacija telekomunikacij in internetnega protokola prek omrežij (TIPHON), 4.
izdaja - Kakovost storitve od konca do konca v sistemih TIPHON - 3. del:
Signalizacija in krmiljenje kakovosti storitve (QoS) od konca do konca
Telecommunications and Internet Protocol Harmonization Over Networks (TIPHON)
Release 4; End-to-end Quality of Service in TIPHON Systems; Part 3: Signalling and
Control of end-to-end Quality of Service
Ta slovenski standard je istoveten z: ETSI TS 102 024-3 V4.1.1 (2003-01)
ICS:
33.040.30 Komutacijski in signalizacijski Switching and signalling
sistem systems
SIST-TS TS 102 024-3 V4.1.1:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TS TS 102 024-3 V4.1.1:2004
---------------------- Page: 2 ----------------------
SIST-TS TS 102 024-3 V4.1.1:2004
ETSI TS 102 024-3 V4.1.1 (2003-01)
Technical Specification
Telecommunications and Internet Protocol
Harmonization Over Networks (TIPHON) Release 4;
End-to-end Quality of Service in TIPHON Systems;
Part 3: Signalling and Control of end-to-end Quality of Service
---------------------- Page: 3 ----------------------
SIST-TS TS 102 024-3 V4.1.1:2004
2 ETSI TS 102 024-3 V4.1.1 (2003-01)
Reference
DTS/TIPHON-05003R4
Keywords
IP, protocol, QoS, signalling, voice, VoIP
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, send your comment to:
editor@etsi.org
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2003.
All rights reserved.
TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
---------------------- Page: 4 ----------------------
SIST-TS TS 102 024-3 V4.1.1:2004
3 ETSI TS 102 024-3 V4.1.1 (2003-01)
Contents
Intellectual Property Rights.6
Foreword.6
1 Scope.7
2 References.7
3 Definitions and abbreviations.8
3.1 Definitions.8
3.2 Abbreviations.8
4 End-to-end QoS Signalling functional requirements .8
4.1 Description.8
4.1.1 General description.8
4.2 Procedures.9
4.2.1 Provision and withdrawal.9
4.2.2 Normal procedures.9
4.2.2.1 Activation, deactivation and interrogation .9
4.2.2.2 Invocation and operation.9
4.2.3 Exceptional procedures.10
4.2.3.1 Invocation and operation.10
4.3 Interactions with other TIPHON service capabilities.10
4.3.1 Registration service capabilities.10
4.3.1.1 Terminal transport service registration.10
4.3.1.2 User service registration.10
4.3.2 Call connectivity service capabilities.10
4.3.2.1 Simple call establishment.10
4.3.2.2 Calling user identity generation .10
4.3.2.3 Calling user identity conveyance .10
4.3.2.4 Calling user identity delivery .10
4.3.2.5 Call rejection.11
4.3.2.6 Number portability.11
4.3.2.6.1 Number portability - All call query .11
4.3.2.6.2 Number portability - Query on release .11
4.3.2.6.3 Number portability - Pivot routing (Drop back).11
4.3.2.7 Emergency calls.11
4.3.2.7.1 Emergency Calling Service (ECS) .11
4.3.2.7.2 Authorized emergency priority calls .11
4.3.2.8 Bearer connectivity.11
4.3.2.8.1 Bearer creation.11
4.3.2.8.2 Bearer negotiation.11
4.3.2.8.3 Bearer re-negotiation.11
4.3.2.8.4 Media path optimization.11
4.3.2.9 Event recording.11
4.3.2.10 Third party authorization.11
4.3.2.11 Overlap sending.12
4.4 Interworking considerations.12
4.5 Overall behaviour.12
5 Functional entity model and information flows .14
5.1 Functional entity model.14
5.1.1 Description of model.14
5.1.2 Description of functional entities.15
5.1.2.1 Calling User.15
5.1.2.2 Calling User's service agent, QFE1.15
5.1.2.3 The originating QoS coordination function, QFE2 .15
5.1.2.4 The terminating QoS coordination function, QFE3 .15
5.1.2.5 The called user's incoming call service agent, QFE4 .15
ETSI
---------------------- Page: 5 ----------------------
SIST-TS TS 102 024-3 V4.1.1:2004
4 ETSI TS 102 024-3 V4.1.1 (2003-01)
5.1.2.6 The QoS policy control function associated with the calling user's service provider, QFE5.15
5.1.2.7 The transport coordination function serving the calling user, QFE6.15
5.1.2.8 The transport coordination function serving the called user, QFE7.16
5.1.2.9 An intervening QoS coordination function, QFE8.16
5.1.2.10 An intervening transport coordination function, QFE9.16
5.1.2.11 Called User.16
5.2 Information flows.16
5.2.1 Definition of information flows.16
5.2.1.1 Relationship ra.16
5.2.1.1.1 OrigQoSEstab.16
5.2.1.2 Relationships rb, rc, rd and re .17
5.2.1.2.1 QoSEstab.17
5.2.1.3 Relationship rf.18
5.2.1.3.1 DestQoSEstab.18
5.2.1.4 Relationship rg.18
5.2.1.4.1 QoSPolicy.18
5.2.1.5 Relationships rh, ri and rj .19
5.2.1.5.1 TRMReserve.19
5.2.1.5.2 TRMConnect.19
5.2.1.5.3 TRMRelease.19
5.2.2 Relationship of information flows to TIPHON simple call .20
5.2.3 Timers.20
5.2.3.1 Reservation Hold Timers .20
5.2.4 Information flow sequences.20
5.2.4.1 Normal operation.21
5.2.4.2 Exceptional behaviour.23
5.3 QoS Functional entity actions .28
5.3.1 Actions of QFE1 .28
5.3.2 Actions of QFE2 .28
5.3.3 Actions of QFE3 .28
5.3.4 Actions of QFE4 .29
5.3.5 Actions of QFE5 .29
5.3.6 Actions of QFE6 .29
5.3.7 Actions of QFE7 .29
5.3.8 Actions of QFE8 .29
5.3.9 Actions of QFE9 .30
5.4 QoS Functional entity behaviour.30
5.4.1 Information flows specified as ASN.1 operations .30
5.4.2 Behaviour of QFE1.33
5.4.3 Behaviour of QFE2, QFE3 and QFE8 .36
5.4.4 Behaviour of QFE6, QFE7 and QFE9 .43
5.4.5 Behaviour of QFE4.46
5.4.6 Behaviour of QFE5.49
5.5 Allocation of functional entities to domains.50
Annex A (informative): Graphical representation of QFE allocation scenarios .51
Annex B (informative): Mappings of QoS meta-protocol to H.323 series protocols .55
B.1 Introduction.55
B.2 OrigQoSEstab.55
B.2.1 Additional H.225.0 ARQ settings for OrigQoSEstab.56
B.3 QoSEstab.57
B.3.1 Additional H.225.0 ARQ settings .58
B.4 DestQoSEstab.58
B.5 QoSPolicy.59
B.6 TRMReserve, TRMConnect, TRMRelease.59
B.7 Summary of mapping QoS meta-protocol to H.323 series.60
ETSI
---------------------- Page: 6 ----------------------
SIST-TS TS 102 024-3 V4.1.1:2004
5 ETSI TS 102 024-3 V4.1.1 (2003-01)
Annex C (informative): Mappings of QoS meta-protocol to SIP and associated protocols.61
C.1 Introduction.61
C.2 OrigQoSEstab.61
C.2 QoSEstab.63
C.3 DestQoSEstab.64
C.4 QoSPolicy.64
C.5 TRMReserve, TRMConnect, TRMRelease.65
C.6 Summary of mapping of QoS meta-protocol to SIP, SDP, RTP/AVP and COPS .66
Annex D (informative): Bibliography.67
History .68
ETSI
---------------------- Page: 7 ----------------------
SIST-TS TS 102 024-3 V4.1.1:2004
6 ETSI TS 102 024-3 V4.1.1 (2003-01)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
All published ETSI deliverables shall include information which directs the reader to the above source of information.
Foreword
This Technical Specification (TS) has been produced by ETSI Project Telecommunications and Internet Protocol
Harmonization Over Networks (TIPHON).
The present document is part 3 of a multi-part deliverable covering the end-to-end Quality of Service in TIPHON
Systems, as identified below:
TR 102 024-1: "General aspects of Quality of Service (QoS)";
TS 102 024-2: "Definition of Speech Quality of Service (QoS) Classes";
TS 102 024-3: "Signalling and Control of end-to-end Quality of Service (QoS) in a multi-media environment";
TS 102 024-4: "Quality of Service Management";
TS 102 024-5: "Quality of Service (QoS) measurement methodologies";
TR 102 024-6: "Actual measurements of network and terminal characteristics and Performance parameters in
TIPHON networks and their influence on voice quality";
TR 102 024-7: "Design Guide for elements of a TIPHON connection from an end-to-end speech transmission
performance point of view";
TS 102 024-9: "Call performance Classification (Voice)";
TS 102 024-10: "QoS Requirements for TIPHON Terminals".
ETSI
---------------------- Page: 8 ----------------------
SIST-TS TS 102 024-3 V4.1.1:2004
7 ETSI TS 102 024-3 V4.1.1 (2003-01)
1 Scope
The present document, "TIPHON signalling and control of end-to-end Quality of Service (QoS)", specifies procedures
for the control of end-to-end QoS within and between domains. TS 101 882 (see bibliography) specifies the TIPHON
meta-protocols and object definitions required by these control procedures.
Additional annexes to the present document define profiles for mapping a number of existing candidates protocols to
the specified TIPHON meta-protocols.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
[1] ETSI TS 101 321: "Telecommunications and Internet Protocol; Harmonization Over Networks
(TIPHON); Open Settlement Protocol (OSP) for Inter-Domain pricing, authorization, and usage
exchange".
[2] ETSI TS 101 329-3: "Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3; End-to-end Quality of Service in TIPHON systems; Part 3: Signalling and
control of end-to-end Quality of Service (QoS)".
[3] ETSI TS 101 878: "Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3; Service Capability Definition; Service Capabilities for a simple call".
[4] ETSI TS 102 024-2: "Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 4; End-to-end Quality of Service in TIPHON Systems; Part 2: Definition of
Speech Quality of Service (QoS) Classes".
[5] ITU-T Recommendation E.164 (1997): "The international public telecommunication numbering
plan".
[6] ITU-T Recommendation Z.100 (1996): "Specification and description language (SDL) with
corrigendum 1".
[7] ITU-T Recommendation X.680: "Information technology; Open Systems Interconnection;
Abstract Syntax Notation One (ASN.1): Specification of basic notation".
[8] ITU-T Recommendation H.323 (2000): "Audiovisual and multimedia systems; Infrastructure of
audiovisual services; Services and terminal equipment for audiovisual services; Packet-based
multimedia communications systems".
[9] ITU-T Recommendation H.225.0 (2000): "Audiovisual and multimedia systems; Infrastructure of
audiovisual services; Transmission multiplexing and synchronization; Call signalling protocols
and media stream packetization for packet-based multimedia communication systems".
[10] ITU-T Recommendation H.245 (2001): "Audiovisual and multimedia systems; Infrastructure of
audiovisual services - Communication procedures; Control protocol for multimedia
communication".
[11] IETF RFC 1890: "RTP Profile for Audio and Video Conferences with Minimal Control".
ETSI
---------------------- Page: 9 ----------------------
SIST-TS TS 102 024-3 V4.1.1:2004
8 ETSI TS 102 024-3 V4.1.1 (2003-01)
[12] IETF RFC 2327: "SDP: Session Description Protocol".
[13] IETF RFC 2748: "The COPS (Common Open Policy Service) Protocol".
[14] IETF RFC 2806: "URLs for Telephone Calls".
[15] IETF RFC 3261: "SIP: Session Initiation Protocol".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the following terms and definitions apply:
name: unique identifier by which a user, access or terminal is known within a TIPHON system
TIPHON system: system that complies with the mandatory requirements identified in the TIPHON specifications
3.2 Abbreviations
For the purposes of the present document, the following abbreviations apply:
ASN.1 Abstract Syntax Notation 1
COPS Common Open Policy Service
OSP Open Settlement Protocol
QFE QoS Functional Entity
QoS Quality of Service
RSVP resource ReSerVation Protocol
RTP/AVP Real-Time Protocol Audio-Video Profile
SCN Switched Circuit Network
SDL Specification and Description Language
SDP Session Description Protocol
SIP Session Initiation Protocol
4 End-to-end QoS Signalling functional requirements
4.1 Description
4.1.1 General description
End-to-end QoS Signalling is used within a TIPHON network to ensure that a caller is provided with an end-to-end
connection having at least the QoS class subscribed to or a lower QoS class if this is acceptable to the user. A QoS level
may either be requested explicitly by the user on a call-by-call basis or may be predefined as part of the user's
subscription. Additionally, the caller may be able to take specific actions if the QoS moves outside the accepted level
during an established call.
The user may use any of the following methods to request a specific end-to-end QoS at call establishment:
1) By subscription:
The agreement between the user and the user's service provider identifies the QoS level to be requested for any
call. The QoS level may be fixed or variable based upon such parameters as time-of-day and call destination.
This method requires no signalling between the user and the service provider at call setup time.
ETSI
---------------------- Page: 10 ----------------------
SIST-TS TS 102 024-3 V4.1.1:2004
9 ETSI TS 102 024-3 V4.1.1 (2003-01)
2) By the use of a standardized TIPHON QoS Class:
The user indicates at each call establishment which of the TIPHON QoS Classes (standardized in
TS 102 024-2 [4]) is to be requested for the call. The TIPHON QoS Classes are identified as:
- Class 1 Best effort;
- Class 2A Acceptable;
- Class 2M Medium;
- Class 2H High;
- Class 3 Best (broadband);
3) By the use of a non-standardized QoS Class:
The user indicates at each call establishment which non-standardized QoS class is to be requested for the call.
The QoS class may represent any combination of QoS parameters previously agreed between the user and the
service provider.
4.2 Procedures
4.2.1 Provision and withdrawal
End-to-end QoS Signalling shall be provided on a per-name, per application basis to all subscribers to the simple call
within a TIPHON system.
When establishing a call, a user shall be able to select at least one of the options identified in table 1.
Ta
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.