oSIST prEN ISO 5832-1:2023

Implants for surgery - Metallic materials - Part 1: Wrought stainless steel (ISO/DIS 5832-1:2023)

ISO 5832-1:2016 specifies the characteristics of, and corresponding test methods for, wrought stainless steel for use in the manufacture of surgical implants.
NOTE 1 The mechanical properties of a sample obtained from a finished product made of this alloy can differ from those specified in this part of ISO 5832.
NOTE 2 The alloy described in this part of ISO 5832 corresponds to UNS S31673 referred to in ASTM F138/ASTM F139 and to alloy code 1.4441 given in the withdrawn DIN 17443.

Chirurgische Implantate - Metallische Werkstoffe - Teil 1: Nichtrostender Stahl (ISO/DIS 5832-1:2023)

Implants chirurgicaux - Matériaux métalliques - Partie 1: Acier inoxydable corroyé (ISO/DIS 5832-1:2023)

L'ISO 5832-1:2016 définit les caractéristiques applicables à l'acier corroyé inoxydable utilisé dans la fabrication des implants chirurgicaux, ainsi que les méthodes d'essai correspondantes.
NOTE 1 Les propriétés mécaniques d'un échantillon prélevé sur un produit fini fabriqué avec cet alliage peuvent différer de celles spécifiées dans la présente partie de l'ISO 5832.
NOTE 2 L'acier décrit dans la présente partie de l'ISO 5832 correspond à la nuance UNS S31673 mentionnée dans l'ASTM F138 et dans l'ASTM F139 ainsi qu'à l'alliage de code 1.4441 indiqué dans la DIN 17443.

Vsadki (implantati) za kirurgijo - Kovinski materiali - 1. del: Nerjavno jeklo (ISO/DIS 5832-1:2023)

General Information

• Status: Not Published
• Public Enquiry End Date: 21-May-2023
• ICS: 11.040.40 - Implants for surgery, prosthetics and orthotics
• Technical Committee: VAZ - Healthcare
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 09-Mar-2023
• Due Date: 27-Jul-2023
• Completion Date: 09-Jun-2023
• Ref Project: prEN ISO 5832-1 - Implants for surgery - Metallic materials - Part 1: Wrought stainless steel (ISO/DIS 5832-1:2023)

Relations

• Revises: SIST EN ISO 5832-1:2019 - Implants for surgery - Metallic materials - Part 1: Wrought stainless steel (ISO 5832-1:2016)
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 5832-1:2023
01-maj-2023
Vsadki (implantati) za kirurgijo - Kovinski materiali - 1. del: Nerjavno jeklo (ISO/DIS
5832-1:2023)
Implants for surgery - Metallic materials - Part 1: Wrought stainless steel (ISO/DIS 5832-
1:2023)
Chirurgische Implantate - Metallische Werkstoffe - Teil 1: Nichtrostender Stahl (ISO/DIS
5832-1:2023)
Implants chirurgicaux - Matériaux métalliques - Partie 1: Acier inoxydable corroyé
(ISO/DIS 5832-1:2023)
Ta slovenski standard je istoveten z: prEN ISO 5832-1
ICS:
11.040.40 Implantanti za kirurgijo, Implants for surgery,
protetiko in ortetiko prosthetics and orthotics
oSIST prEN ISO 5832-1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 5832-1:2023

---------------------- Page: 2 ----------------------
oSIST prEN ISO 5832-1:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 5832-1
ISO/TC 150/SC 1 Secretariat: DIN
Voting begins on: Voting terminates on:
2023-02-27 2023-05-22
Implants for surgery — Metallic materials —
Part 1:
Wrought stainless steel
Implants chirurgicaux — Produits à base de métaux —
Partie 1: Acier inoxydable corroyé
ICS: 11.040.40
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 5832-1:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
oSIST prEN ISO 5832-1:2023
ISO/DIS 5832-1:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 5832-1
ISO/TC 150/SC 1 Secretariat: DIN
Voting begins on: Voting terminates on:

Implants for surgery — Metallic materials —
Part 1:
Wrought stainless steel
Implants chirurgicaux — Produits à base de métaux —
Partie 1: Acier inoxydable corroyé
ICS: 11.040.40
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: [phone]
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: [e-mail]
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 5832-1:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

---------------------- Page: 4 ----------------------
oSIST prEN ISO 5832-1:2023
ISO/DIS 5832-1:2022(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Chemical composition .2
4.1 Test samples . 2
4.2 Cast analysis . 2
5 Microstructure in the fully annealed condition . 2
5.1 Grain size . 2
5.2 Microstructure . 3
5.3 Inclusion content . 3
6 Mechanical properties .3
6.1 Test pieces . . 3
6.2 Tensile test . 3
6.3 Gauge length . 3
7 Test methods . 3
Bibliography . 6
iii
© ISO 2022 – All rights reserved

---------------------- Page: 5 ----------------------
oSIST prEN ISO 5832-1:2023
ISO/DIS 5832-1:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee Implants for surgery, Subcommittee SC 1,
Materials.
This sixth edition cancels and replaces the fifth edition (ISO 5832-1:2016), which has bee
...