SIST EN 300 392-3-2 V1.2.1:2006
(Main)Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 3: Interworking at the Inter-System Interface (ISI); Sub-part 2: Additional Network Feature Individual Call (ANF-ISIIC)
Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 3: Interworking at the Inter-System Interface (ISI); Sub-part 2: Additional Network Feature Individual Call (ANF-ISIIC)
The present document defines the Terrestrial Trunked Radio (TETRA) system supporting Voice plus Data (V+D). It specifies:
• general design aspects (e.g. reference points, numbering and addressing, or protocol architecture);
• the system bearer and mobility management services, and the corresponding air interface protocols;
• the interworking between TETRA networks;
• the interworking of TETRA networks with other networks, via gateways;
• the peripheral equipment interface on the mobile station;
• the Line Station (LS) interface with TETRA networks;
• the security protocols and mechanisms applicable to TETRA networks and to TETRA terminal equipment;
• the supplementary services applicable to the basic TETRA tele- or bearer services.
The TETRA V+D interworking - basic operation part defines the interworking between TETRA networks over the corresponding interface: the Inter-System Interface (ISI). It comprises the following subparts:
• ISI general design;
• Additional Network Feature - ISI Individual Call (ANF-ISIIC);
• Additional Network Feature - ISI Group Call (ANF-ISIGC);
• Additional Network Feature - ISI Short Data service (ANF-ISISD);
• Additional Network Feature - ISI Mobility Management (ANF-ISIMM);
• 8 kbit/s encoding of user information at the ISI.
The present document is the ANF-ISIIC sub-part.
ANF-ISIIC enables calls to be set-up by a user registered in one TETRA network to another user registered in another TETRA network, operating at the ISI of both SwMIs. It also supports call restoration when a user has migrated to another TETRA network during an established call. Additionally, ANF-ISIIC allows TETRA signalling information to be passed from a TETRA SwMI to another TETRA SwMI supporting the TETRA individual call procedures as defined in clauses 11 and 14 of EN 300 392-2 [1].
Like all other Additional Network Feature (ANF) specifications, those of ANF-ISIIC are produced in three stages, according to the method described in ITU-T Recommendation I.130 [11]. The present document contains the stage 1 and 2 descriptions of ANF-ISIIC, and its partial stage 3 description. The stage 1 description specifies the ANF as seen by its users, which are essentially the individual call control entities in both TETRA networks. The stage 2 description identifies the functional entities involved in the ANF and the information flows between them. And the partial stage 3 description of ANF-ISIIC specifies its protocol.
NOTE: According to ITU-T Recommendation I.130 [11], the stage 3 description of a bearer or tele-service addresses the network implementation aspects. Consequently, it comprises two steps: the specifications of all protocols at the various reference points involved in any of the service procedures (notably the service operation) are the first step of the stage 3 description, and the specifications of the functions of the corresponding network entities are its second step. The latter have not been provided since they can be derived from the specification of the functional entity actions in the stage 2 description. The present document applies to TETRA networks which support inter-TETRA individual calls. More specifically, it applies to their Circuit Mode Control Entities (CMCE), as defined in clause 14.2 of EN 300 392-2 [1], and to their ANF-ISIIC entities defined in the stage 2 description.
Prizemni snopovni radio (TETRA) - Govor in podatki (V+D) - 3. del: Medsebojno delovanje na medsistemskem vmesniku (ISI) - 2. poddel: Dodatna omrežna funkcija: posamezni klic (ANF-ISIIC)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 300 392-3-2 V1.2.1:2006
01-april-2006
Prizemni snopovni radio (TETRA) - Govor in podatki (V+D) - 3. del: Medsebojno
delovanje na medsistemskem vmesniku (ISI) - 2. poddel: Dodatna omrežna
funkcija: posamezni klic (ANF-ISIIC)
Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 3: Interworking at the
Inter-System Interface (ISI); Sub-part 2: Additional Network Feature Individual Call (ANF-
ISIIC)
Ta slovenski standard je istoveten z: EN 300 392-3-2 Version 1.2.1
ICS:
33.070.10 Prizemni snopovni radio Terrestrial Trunked Radio
(TETRA) (TETRA)
SIST EN 300 392-3-2 V1.2.1:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 300 392-3-2 V1.2.1:2006
---------------------- Page: 2 ----------------------
SIST EN 300 392-3-2 V1.2.1:2006
ETSI EN 300 392-3-2 V1.2.1 (2004-01)
European Standard (Telecommunications series)
Terrestrial Trunked Radio (TETRA);
Voice plus Data (V+D);
Part 3: Interworking at the Inter-System Interface (ISI);
Sub-part 2: Additional Network Feature
Individual Call (ANF-ISIIC)
---------------------- Page: 3 ----------------------
SIST EN 300 392-3-2 V1.2.1:2006
2 ETSI EN 300 392-3-2 V1.2.1 (2004-01)
Reference
REN/TETRA-03086
Keywords
interworking, radio, TETRA, V+D
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, send your comment to:
editor@etsi.org
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2004.
All rights reserved.
TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
---------------------- Page: 4 ----------------------
SIST EN 300 392-3-2 V1.2.1:2006
3 ETSI EN 300 392-3-2 V1.2.1 (2004-01)
Contents
Intellectual Property Rights.8
Foreword.8
1 Scope.10
2 References.11
3 Definitions and abbreviations.12
3.1 Definitions.12
3.2 Abbreviations.12
4 ANF-ISIIC stage 1 specification .14
4.1 Description.14
4.1.1 General description.14
4.1.2 Qualifications on applicability to telecommunication services.14
4.2 Procedures.14
4.2.1 Provision/withdrawal.14
4.2.2 Normal procedures.14
4.2.2.1 Activation/deactivation/registration/interrogation.14
4.2.2.2 Invocation and operation.15
4.2.2.2.1 Call routeing.15
4.2.2.2.2 Control of call time-out timers .15
4.2.2.2.3 Transmission control.15
4.2.2.2.3a Setup modification.16
4.2.2.2.4 Call modification.16
4.2.2.2.5 Call restoration after migration.16
4.2.2.2.6 Call clearing.17
4.2.2.2.7 Interaction between ANF-ISIICs.17
4.2.2.2.8 Radio traffic channel resource queuing and allocation policies. .17
4.2.3 Exceptional procedures.18
4.2.3.1 Activation/deactivation/registration/interrogation.18
4.2.3.2 Invocation and operation.18
4.3 Interactions with other TETRA supplementary services and ANFs.18
4.3.1 Calling Line Identification Presentation (SS-CLIP) .18
4.3.2 Connected Line identification Presentation (SS-COLP).18
4.3.3 Calling/connected Line Identification Restriction (SS-CLIR).18
4.3.4 Call Report (SS-CR) .18
4.3.5 Talking Party Identification (SS-TPI).19
4.3.6 Call Forwarding Unconditional (SS-CFU) .19
4.3.7 Call Forwarding on Busy (SS-CFB) .20
4.3.8 Call Forwarding on No Reply (SS-CFNRy) .22
4.3.9 Call Forwarding on Not Reachable (SS-CFNRc) .22
4.3.10 List Search Call (SS-LSC).22
4.3.11 Call Authorized by Dispatcher (SS-CAD).23
4.3.12 Short Number Addressing (SS-SNA) .24
4.3.13 Area Selection (SS-AS) .24
4.3.14 Access Priority (SS-AP) .24
4.3.15 Priority Call (SS-PC) .24
4.3.16 Call Waiting (SS-CW).24
4.3.17 Call Hold (SS-HOLD) .24
4.3.18 Call Completion to Busy Subscriber (SS-CCBS) .25
4.3.19 Late Entry (SS-LE) .25
4.3.20 Transfer of Control (SS-TC).25
4.3.21 Pre-emptive Priority Call (SS-PPC).25
4.3.22 Include Call (SS-IC) .25
4.3.23 Advice of Charge (SS-AoC) .25
4.3.24 Barring of Outgoing Calls (SS-BOC) .26
4.3.25 Barring of Incoming Calls (SS-BIC) .26
ETSI
---------------------- Page: 5 ----------------------
SIST EN 300 392-3-2 V1.2.1:2006
4 ETSI EN 300 392-3-2 V1.2.1 (2004-01)
4.3.26 Discreet Listening (SS-DL) .26
4.3.27 Ambience Listening (SS-AL).27
4.3.28 Dynamic Group Number Assignment (SS-DGNA).27
4.3.29 Call Completion on No Reply (SS-CCNR) .27
4.3.30 Call Retention (SS-CRT).27
4.3.31 Additional Network Feature - Inter System Interface Group Call (ANF-ISIGC).27
4.3.32 Additional Network Feature - Inter System Interface Short Data Service (ANF-ISISD) .27
4.3.33 Additional Network Feature - Inter System Interface Mobility Management (ANF-ISIMM) .27
4.3.34 Additional Network Feature - Inter System Interface Supplementary service (ANF-ISISS) .27
4.4 Interworking considerations.28
4.5 Static description of ANF-ISIIC using attributes .29
4.6 Overall SDL.31
5 ANF-ISIIC stage 2 specification .36
5.1 Functional model.36
5.1.1 Functional model description.36
5.1.2 Description of functional entities.37
5.1.2.1 SwMI A individual call control application functional entity, FE1 .37
5.1.2.2 ISI individual call originating functional entity, FE2.38
5.1.2.3 ISI individual outgoing call route determining functional entity, FE3.38
5.1.2.4 ISI individual call migration handling functional entity, FE4.38
5.1.2.5 ISI information provision functional entity, FE5 .39
5.1.2.6 ISI individual call migrated called user routeing functional entity, FE6.39
5.1.2.7 ISI individual call terminating functional entity, FE7.39
5.1.2.8 Terminating SwMI call control functional entity, FE8 .40
5.1.3 Relationship of functional model to basic call functional model.40
5.2 Information flow.41
5.2.1 Examples of information flow sequences .41
5.2.1.1 Successful call set-up when the called user is registered in SwMI B and uses on/off hook
signalling.42
5.2.1.2 Successful call set-up when the called user is registered in SwMI B and uses direct set-up
signalling.44
5.2.1.3 ANF-ISIIC set-up to a called user having migrated from SwMI B, using forward switching .45
5.2.1.4 ANF-ISIIC set-up to a called user having migrated from SwMI B, using re-routeing .45
5.2.1.5 Loop avoidance in case of intra-TETRA call.48
5.2.1.6 Unsuccessful ANF-ISIIC call set-up.49
5.2.1.7 Transmission control.51
5.2.1.8 Call modify.52
5.2.1.9 Call restoration after migration .53
5.2.1.10 Call clearing.55
5.2.1.11 Radio traffic channel resource queuing and allocation.55
5.2.2 Definition of information flows.56
5.2.2.1 CALL RESTORE.56
5.2.2.2 CALL RESTORE PREPARE .57
5.2.2.3 CHARACTERISTIC CHANGE.57
5.2.2.4 COMPLETE.58
5.2.2.5 INFORM 1.58
5.2.2.6 INFORM 2.59
5.2.2.7 INFORM 3.59
5.2.2.8 MIGRATION.59
5.2.2.9 MODIFY.60
5.2.2.10 RELEASE.60
5.2.2.11 SETUP.61
5.2.2.12 SETUP PROLONGATION.62
5.2.2.13 TROMBONE.63
5.2.2.14 TX-CEASED.63
5.2.2.14.1 TX-CEASED 1.63
5.2.2.14.2 TX-CEASED 2.63
5.2.2.15 TX-CONTINUE 1.64
5.2.2.16 TX-CONTINUE 2.64
5.2.2.17 TX-DEMAND.64
5.2.2.18 TX-GRANTED.64
ETSI
---------------------- Page: 6 ----------------------
SIST EN 300 392-3-2 V1.2.1:2006
5 ETSI EN 300 392-3-2 V1.2.1 (2004-01)
5.2.2.19 TX-INTERRUPT.65
5.2.2.20 TX-WAIT.65
5.2.3 Relationship of information flows to basic call information flows.65
5.3 Functional entity actions .66
5.4 Allocation of functional entities to physical equipment/SwMIs.66
6 ANF-ISIIC stage 3 specification .68
6.1 ANF-ISIIC description.68
6.2 ANF-ISIIC operational requirements .68
6.2.1 Requirements on the originating SwMI.68
6.2.2 Requirements on the terminating SwMI .69
6.2.3 Requirements on a called SwMI when it is different from the terminating SwMI .69
6.2.4 Requirements on a routeing SwMI .70
6.2.5 Requirements on a SwMI with PSTN/ISDN/PISN incoming gateway .70
6.2.6 Requirements on a SwMI with PSTN/ISDN/PISN outgoing gateways.71
6.3 ANF-ISIIC coding requirements .72
6.3.1 TETRA PDUs.72
6.3.1.1 TETRA PDU giving complementary information in the PSS1 SETUP message sent by the
originating or the incoming gateway SwMI.72
6.3.1.2 TETRA PDU giving complementary information in a PSS1 PROGRESS message .76
6.3.1.3 TETRA message sent by the called SwMI in a PSS1 FACILITY message when it is not the
terminating SwMI because of migration or SS-CF invocation .76
6.3.1.4 TETRA message sent by the originating SwMI in a PSS1 FACILITY message to request
forward switching .78
6.3.1.5 TETRA PDU giving complementary information in the PSS1 ALERTING message .79
6.3.1.6 TETRA PDU giving complementary information in the PSS1 CONNECT message.79
6.3.1.7 TETRA information sent by the terminating SwMI in PSS1 FACILITY messages before the
PSS1 ALERTING or CONNECT message.81
6.3.1.8 TETRA information sent by the terminating SwMI in a PSS1 FACILITY message during call
establishment after the PSS1 ALERTING or CONNECT message.82
6.3.1.9 TETRA information sent by the originating SwMI in a PSS1 FACILITY message before the call
has been established .82
6.3.1.10 TETRA CONNECT ACKNOWLEDGE sent by the originating SwMI in a PSS1 FACILITY
message .82
6.3.1.11 Other TETRA messages possibly sent by the originating SwMI in PSS1 FACILITY messages .82
6.3.1.12 TETRA messages possibly sent by either the originating or the terminating SwMI in a PSS1
FACILITY message.84
6.3.1.13 TETRA messages possibly sent by the terminating SwMI in PSS1 FACILITY messages .85
6.3.1.14 TETRA PDUs giving complementary information in PSS1 messages to restore the call after the
calling or the connected user has migrated in a new SwMI .86
6.3.1.14.1 Case where no connection between the old SwMI and the new SwMI already exists or has
been identified .87
6.3.1.14.2 Cases where no new connection is needed between the old SwMI and the new SwMI.88
6.3.1.15 TETRA PDUs giving complementary information in PSS1 DISCONNECT messages.91
6.3.1.16 TETRA PDU giving complementary information in a PSS1 RELEASE message.92
6.3.1.17 TETRA PDUs giving complementary information in a PSS1 RELEASE COMPLETE message .92
6.3.1.18 TETRA PDUs specific for interaction with supplementary service protocol sent to the
originating SwMI in a PSS1 FACILITY message .92
6.3.1.19 TETRA PDUs sent towards the Called or Visited SwMI in a PSS1 FACILITY after the PSS1
call has been connected.93
6.3.1.20 TETRA PDUs sent towards the Called or Originating SwMI in a PSS1 FACILITY after the
PSS1 call has connected.94
6.3.2 TETRA PDU information element coding .95
6.3.2.1 Specific ISI definition of some information elements already defined for air interface messages .96
6.3.2.1.1 Basic service information .96
6.3.2.1.2 Call status.96
6.3.2.1.3 Call time-out, set-up phase .96
6.3.2.1.4 Disconnect cause information element.97
6.3.2.1.5 PDU type.98
6.3.2.2 New information elements used at the ISI .99
6.3.2.2.1 Call diverted to a dispatcher .99
6.3.2.2.2 Call has been forward switched.99
ETSI
---------------------- Page: 7 ----------------------
SIST EN 300 392-3-2 V1.2.1:2006
6 ETSI EN 300 392-3-2 V1.2.1 (2004-01)
6.3.2.2.3 Call identified as fleet call .99
6.3.2.2.4 Called/forwarded-to external subscriber number.99
6.3.2.2.5 Called/forwarded-to party extension .99
6.3.2.2.6 Called/forwarded-to party SSI.99
6.3.2.2.7 Called/forwarded-to party fleet number SSI.100
6.3.2.2.8 Called/forwarded-to user having migrated .100
6.3.2.2.9 Calling external subscriber number .100
6.3.2.2.10 Calling external subscriber number parameters.100
6.3.2.2.11 Calling party fleet number SSI .100
6.3.2.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.