SIST EN 13967:2005/A1:2007

Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics

This document specifies definitions and characteristics of flexible reinforced bitumen sheets for which the intended use is as water vapour control layers for buildings. It specifies the requirements and test methods and provides for the evaluation of conformity of the products with the requirements of this document.

Abdichtungsbahnen - Kunststoff- und Elastomerbahnen für die Bauwerksabdichtung gegen Bodenfeuchte und Wasser - Definitionen und Eigenschaften

Feuilles souples d'étanchéité - Feuilles plastiques et élastomeres empechant les remontées capillaires du sol - Définitions et caractéristiques

Hidroizolacijski trakovi - Polimerni in elastomerni tesnilni trakovi za temelje - Definicije in lastnosti

General Information

• Status: Withdrawn
• Publication Date: 28-Feb-2007
• Withdrawal Date: 01-Aug-2012
• ICS: 01.040.91 - Construction materials and building (Vocabularies)
• ICS: 91.100.50 - Binders. Sealing materials
• Technical Committee: VLA - Water proofing
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 02-Aug-2012
• Due Date: 25-Aug-2012
• Completion Date: 02-Aug-2012
• Directive: 89/106/EEC - Construction products
• Mandate: M/102 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on membranes
• Ref Project: EN 13967:2004/A1:2006 - Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics

Relations

• Replaced By: SIST EN 13967:2012 - Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics
• Effective Date: 01-Sep-2012
• Amends: SIST EN 13967:2005 - Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics
• Effective Date: 22-Dec-2008
• Amends: SIST EN 13967:2005 - Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13967:2005/A1:2007
01-marec-2007
Hidroizolacijski trakovi - Polimerni in elastomerni tesnilni trakovi za temelje -
Definicije in lastnosti
Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic
and rubber basement tanking sheet - Definitions and characteristics
Abdichtungsbahnen - Kunststoff- und Elastomerbahnen für die Bauwerksabdichtung
gegen Bodenfeuchte und Wasser - Definitionen und Eigenschaften
Feuilles souples d'étanchéité - Feuilles plastiques et élastomeres empechant les
remontées capillaires du sol - Définitions et caractéristiques
Ta slovenski standard je istoveten z: EN 13967:2004/A1:2006
ICS:
01.040.91 Gradbeni materiali in gradnja Construction materials and
(Slovarji) building (Vocabularies)
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
SIST EN 13967:2005/A1:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 13967:2004/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2006
ICS 01.040.91; 91.100.50

English Version
Flexible sheets for waterproofing - Plastic and rubber damp
proof sheets including plastic and rubber basement tanking
sheet - Definitions and characteristics
Feuilles souples d'étanchéité - Feuilles plastiques et Abdichtungsbahnen - Kunststoff- und Elastomerbahnen für
élastomères empêchant les remontées capillaires du sol - die Bauwerksabdichtung gegen Bodenfeuchte und Wasser
Définitions et caractéristiques - Definitionen und Eigenschaften
This amendment A1 modifies the European Standard EN 13967:2004; it was approved by CEN on 5 October 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13967:2004/A1:2006: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN 13967:2004/A1:2006 (E)
Contents Page
2 Normative references.
...