Optical fibre cables -- Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premises cabling

It presents the detailed requirements specific to optical fibre ribbon cables for use in premises cabling to ensure compatibility with ISO 11801. The requirements of the family specification EN 60794-2-30 are applicable to cables covered by this standard.

Lichtwellenleiterkabel -- Teil 2-31: LWL-Innenkabel - Bauartspezifikation für LWL-Bandkabel zur Innenverlegung für anwendungsneutrale Standortverkabelung

Câbles à fibres optiques -- Partie 2-31: Câbles intérieurs - Spécification particulière pour les câbles à fibres optiques en ruban utilisés dans le câblage de locaux

Elle présente les exigences particulières spécifiques aux câbles à fibres optiques en ruban destinés à être utilisés dans le câblage de locaux, dont l'objectif est d'assurer la compatibilité avec l'ISO 11801. Les exigences contenues dans la spécification de famille EN 60794-2-30 sont applicables aux câbles couverts par la présente norme.

Optični kabli - 2-31. del: Notranji kabli - Podrobna specifikacija za optične tračne kable za okablenje prostorov (IEC 60794-2-31:2005)

General Information

Status
Withdrawn
Publication Date
30-Jun-2006
Withdrawal Date
22-Oct-2015
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
16-Oct-2015
Due Date
08-Nov-2015
Completion Date
23-Oct-2015

Relations

Buy Standard

Standard
EN 60794-2-31:2006
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60794-2-31:2006
01-julij-2006
2SWLþQLNDEOLGHO1RWUDQMLNDEOL3RGUREQDVSHFLILNDFLMD]DRSWLþQHWUDþQH
NDEOH]DRNDEOHQMHSURVWRURY ,(&
Optical fibre cables -- Part 2-31: Indoor cables - Detailed specification for optical fibre
ribbon cables for use in premises cabling
Lichtwellenleiterkabel -- Teil 2-31: LWL-Innenkabel - Bauartspezifikation für LWL-
Bandkabel zur Innenverlegung für anwendungsneutrale Standortverkabelung
Câbles à fibres optiques -- Partie 2-31: Câbles intérieurs - Spécification particulière pour
les câbles à fibres optiques en ruban utilisés dans le câblage de locaux
Ta slovenski standard je istoveten z: EN 60794-2-31:2006
ICS:
33.180.10 2SWLþQD YODNQDLQNDEOL Fibres and cables
SIST EN 60794-2-31:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60794-2-31:2006

---------------------- Page: 2 ----------------------

SIST EN 60794-2-31:2006


EUROPEAN STANDARD
EN 60794-2-31

NORME EUROPÉENNE
January 2006
EUROPÄISCHE NORM

ICS 33.180.10


English version


Optical fibre cables
Part 2-31: Indoor cables –
Detailed specification for optical fibre ribbon cables
for use in premises cabling
(IEC 60794-2-31:2005)


Câbles à fibres optiques Lichtwellenleiterkabel
Partie 2-31: Câbles intérieurs - Teil 2-31: LWL-Innenkabel -
Spécification particulière pour les câbles Bauartspezifikation für LWL-Bandkabel
à fibres optiques en ruban utilisés zur Innenverlegung für
dans le câblage de locaux anwendungsneutrale Standortverkabelung
(CEI 60794-2-31:2005) (IEC 60794-2-31:2005)




This European Standard was approved by CENELEC on 2005-12-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60794-2-31:2006 E

---------------------- Page: 3 ----------------------

SIST EN 60794-2-31:2006
EN 60794-2-31:2006 - 2 -
Foreword
The text of document 86A/996/FDIS, future edition 1 of IEC 60794-2-31, prepared by SC 86A, Fibres and
cables, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and was approved
by CENELEC as EN 60794-2-31 on 2005-12-01.
This standard is to be used in conjunction with EN 60794-1-1:2002, EN 60794-1-2:2003,
EN 60794-2:2003 and EN 60794-2-30:2003.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-09-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2008-12-01
This European Standard makes reference to International Standards. Where the International Standard
referred to has been endorsed as a European Standard or a home-grown European Standard exists, this
European Standard shall be applied instead. Pertinent information can be found on the CENELEC web
site.
__________
Endorsement notice
The text of the International Standard IEC 60794-2-31:2005 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 60794-2-31:2006
NORME CEI
INTERNATIONALE
IEC



60794-2-31
INTERNATIONAL


Première édition
STANDARD

First edition

2005-06


Câbles à fibres optiques –
Partie 2-31:
Câbles intérieurs –
Spécification particulière pour les
câbles à fibres optiques en ruban
utilisés dans le câblage de locaux

Optical fibre cables –
Part 2-31:
Indoor cables –
Detailed specification for optical fibre ribbon
cables for use in premises cabling

 IEC 2005 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
J
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 5 ----------------------

SIST EN 60794-2-31:2006
60794-2-31  IEC 2005 – 3 –
CONTENTS
FOREWORD.5

1 Scope.11
2 Normative references .11
3 General requirements .13
4 Particular requirements .13
4.1 Environmental requirements .13
4.1.1 Temperature cycling .13
4.2 Transmission requirements .13
4.2.1 Attenuation of cabled fibre.13
4.2.2 Fibre bandwidth requirements.15

Bibliography.17


Table 1 – Multimode maximum cable attenuation coefficient (dB/km) .15
Table 2 – Single-mode maximum cable attenuation coefficient (dB/km) .15
Table 3 – Minimum multimode fibre bandwidth (MHz⋅km).15

---------------------- Page: 6 ----------------------

SIST EN 60794-2-31:2006
60794-2-31  IEC 2005 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

OPTICAL FIBRE CABLES –

Part 2-31: Indoor cables –
Detailed specification for optical fibre ribbon cables
for use in premises cabling


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.