SIST EN 60794-3-30:2009

Optical fibre cables - Part 3-30: Outdoor cables - Family specification for optical telecommunication cables for lakes, river crossings and coastal application (IEC 60794-3-30:2008)

This part of IEC 60794 is a family specification which covers optical fibre ribbon cables for indoor use. The requirements of the sectional specification IEC 60794-2 are applicable to cables covered by this standard. Clause B.2 contains requirements that supersede the normal requirements in case the cables are intended to be used in installations governed by the MICE table of ISO/IEC 24702.

Lichtwellenleiterkabel - Teil 3-30: Außenkabel - Familienspezifikation für LWL-Fernmeldekabel für die Durchquerung von Seen und Flüssen und für Küstenanwendungen (CEI 60794-3-30:2008)

Câbles à fibres optiques - Partie 3-30: Câbles extérieurs - Spécification de famille pour les câbles optiques de télécommunication utilisés pour les traversées de lacs, de rivières, et pour applications côtières (IEC 60794-3-30:2008)

la CEI 60794-3-30:2008 donne de famille s'applique aux câbles optiques de télécommunication destinés à être utilisés pour les traversées des lacs et des rivières, et pour les applications côtières. Les exigences de la spécification intermédiaire CEI 60794-3 pour les câbles installés dans des conduites, enterrés, aériens, et pour les traversées de lacs et de rivières, et les applications côtières, sont applicables aux câbles couverts par la présente norme. Les principaux changements par rapport à l'édition précédente sont:
- le titre de cette spécification a été mis à jour pour inclure les applications côtières;
- les spécifications de fibres ont été étendues afin d'inclure les fibres de type B5; et
- une annexe a été ajoutée comprenant des exigences supplémentaires selon la table "MICE".

Optični kabli - 3-30. del: Kabli za zunanjo uporabo - Skupinska specifikacija za optične telekomunikacijske kable za uporabo na jezerih, za prečkanje rek in obalna področja (IEC 60794-3-30:2008)

General Information

• Status: Published
• Publication Date: 17-Nov-2008
• ICS: 33.180.10 - Fibres and cables
• Technical Committee: iTEL - Communication cables
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 12-Nov-2008
• Due Date: 17-Jan-2009
• Completion Date: 18-Nov-2008
• Ref Project: EN 60794-3-30:2008 - Optical fibre cables - Part 3-30: Outdoor cables - Family specification for optical telecommunication cables for lakes, river crossings and coastal application

Relations

• Replaces: SIST EN 60794-3-30:2004 - Optical fibre cables -- Part 3-30: Outdoor cables - Family specification for optical telecommunication cables for lake and river crossings
• Effective Date: 13-May-2010
• Replaces: SIST EN 60794-3-30:2004 - Optical fibre cables -- Part 3-30: Outdoor cables - Family specification for optical telecommunication cables for lake and river crossings
• Effective Date: 28-Jan-2023
• Replaces: SIST EN 60794-3-30:2004 - Optical fibre cables -- Part 3-30: Outdoor cables - Family specification for optical telecommunication cables for lake and river crossings
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60794-3-30:2009
01-januar-2009
1DGRPHãþD
SIST EN 60794-3-30:2004
2SWLþQLNDEOLGHO.DEOL]D]XQDQMRXSRUDER6NXSLQVNDVSHFLILNDFLMD]D
RSWLþQHWHOHNRPXQLNDFLMVNHNDEOH]DXSRUDERQDMH]HULK]DSUHþNDQMHUHNLQREDOQD
SRGURþMD,(&
Optical fibre cables - Part 3-30: Outdoor cables - Family specification for optical
telecommunication cables for lakes, river crossings and coastal application (IEC 60794-3
-30:2008)
Lichtwellenleiterkabel - Teil 3-30: Außenkabel - Familienspezifikation für LWL-
Fernmeldekabel für die Durchquerung von Seen und Flüssen und für
Küstenanwendungen (CEI 60794-3-30:2008)
Câbles à fibres optiques - Partie 3-30: Câbles extérieurs - Spécification de famille pour
les câbles optiques de télécommunication utilisés pour les traversées de lacs, de
rivières, et pour applications côtières (IEC 60794-3-30:2008)
Ta slovenski standard je istoveten z: EN 60794-3-30:2008
ICS:
33.180.10 2SWLþQDYODNQDLQNDEOL Fibres and cables
SIST EN 60794-3-30:2009 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60794-3-30:2009

---------------------- Page: 2 ----------------------

SIST EN 60794-3-30:2009

EUROPEAN STANDARD
EN 60794-3-30

NORME EUROPÉENNE
November 2008
EUROPÄISCHE NORM

ICS 33.180.10 Supersedes EN 60794-3-30:2003


English version


Optical fibre cables -
Part 3-30: Outdoor cables -
Family specification for optical telecommunication cables
for lakes, river crossings and coastal application
(IEC 60794-3-30:2008)


Câbles à fibres optiques -  Lichtwellenleiterkabel -
Partie 3-30: Câbles extérieurs - Teil 3-30: Außenkabel -
Spécification de famille Familienspezifikation
pour les câbles optiques für LWL-Fernmeldekabel
de télécommunication utilisés für die Durchquerung
pour les traversées de lacs, de rivières, von Seen und Flüssen und
et pour applications côtières für Küstenanwendungen
(CEI 60794-3-30:2008) (IEC 60794-3-30:2008)




This European Standard was approved by CENELEC on 2008-10-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60794-3-30:2008 E

---------------------- Page: 3 ----------------------

SIST EN 60794-3-30:2009
EN 60794-3-30:2008 – 2 –
Foreword
The text of document 86A/1203/FDIS, future edition 2 of IEC 60794-3-30, prepared by SC 86A, Fibres
and cables, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 60794-3-30 on 2008-10-01.
This European Standard supersedes EN 60794-3-30:2003.
The main changes with respect to EN 60794-3-30:2003 are listed below:
– the title of the specification has been updated to include coastal applications;
– fibre specifications have been enlarged to include fibre Type B5;
– an annex has been added for additional requirements according to the MICE table.
This European Standard is to be read in conjunction with EN 60794-1-1, EN 60794-1-2 and EN 60794-3.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2009-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-10-01
__________
Endorsement notice
The text of the International Standard IEC 60794-3-30:2008 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60654 NOTE  Harmonized in EN 60654 series (not modified).
IEC 60654-4 NOTE  Harmonized as EN 60654-4:1997 (not modified).
IEC 60721 NOTE  Harmonized in EN 60721 series (not modified).
IEC 60721-1 NOTE  Harmonized as EN 60721-1:1995 (not modified).
IEC 60721-3-3 NOTE  Harmonized as EN 60721-3-3:1995 (not modified).
IEC 61000-6-2 NOTE  Harmonized as EN 61000-6-2:2005 (not modified).
IEC 61918 NOTE  Harmonized as EN 61918:2008 (modified).
__________

---------------------- Page: 4 ----------------------

SIST EN 60794-3-30:2009
– 3 – EN 60794-3-30:2008

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Addition to Annex ZA of EN 60794-1-1, EN 60794-1-2 and EN 60794-3:
Publication Year Title EN/HD Year

1) 2)
IEC 60793-1-48 - Optical fibres - EN 60793-1-48 2007
Part 1-48: Measurement methods and test
procedures - Polarization mode dispersion


1) 2)
IEC 60793-2-50 - Optical fibres - EN 60793-2-50 2008
Part 2-50: Product specifications - Sectional
specification for class B single-mode fibres





1)
Undated reference.
2)
Valid edition at date of issue.

---------------------- Page: 5 ----------------------

SIST EN 60794-3-30:2009

---------------------- Page: 6 ----------------------

SIST EN 60794-3-30:2009
IEC 60794-3-30
Edition 2.0 2008-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE


Optical fibre cables –
Part 3-30: Outdoor cables – Family specification for optical telecommunication
cables for lakes, river crossings and coastal application

Câbles à fibres optiques –
Partie 3-30: Câbles extérieurs – Spécification de famille pour les câbles optiques
de télécommunication utilisés pour les traversées de lacs, de rivières, et pour
applications côtières

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
T
CODE PRIX
ICS 33.180.10 ISBN 2-8318-9901-X
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 60794-3-30:2009
– 2 – 60794-3-30 © IEC:2008
CONTENTS
FOREWORD.3
1 Scope.5
2 Normative references .5
3 Symbols and abbreviations.6
4 Family specification for optical telecommunication cables to be used in lakes, river
crossings and coastal application (blank detail specification and minimum
requirements) .6
4.1 Optical fibres.6
4.1.1 Single-mode dispersion unshifted (B1.1) optical fibre .6
4.1.2 Single-mode dispersion unshifted (B1.2) optical fibre .7
4.1.3 Single-mode dispersion unshifted (B1.3) optical fibre .8
4.1.4 Single-mode dispersion shifted (B2) optical fibre .8
4.1.5 Single-mode non-zero dispersion (B4) optical fibre.9
4.1.6 Single-mode non-zero dispersion shifted (B5) optical fibre .10
4.2 Cable element .10
4.3 Installation and operating conditions .11
)
4.4 Mechanical and environmental tests .11
4.4.1 Tests applicable .12
4.4.2 Details on family requirements and test conditions for optical fibre
cable tests.13
Annex A (informative) Family specification for optical telecommunication cables to be
used in lakes, river crossings and coastal application (Blank detail specification and
minimum requirements) – Cable description.17
Annex B (normative) Cable construction .19
Annex C (informative) BDS for ISO/IEC 24702 applications (MICE) .20
Bibliography.23

---------------------- Page: 8 ----------------------

SIST EN 60794-3-30:2009
60794-3-30 © IEC:2008 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________

OPTICAL FIBRE CABLES –

Part 3-30: Outdoor cables –
Family specification for optical telecommunication
cables for lakes, river crossings and coastal application


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60794-3-30 has been prepared by subcommittee 86A: Fibres and
cables, of IEC technical committee 86: Fibre optics.
This standard is to be used in conjunction with IEC 60794-1-1 and IEC 60794-1-2, and
IEC 60794-3.
This second edition cancels and replaces the first edition published in 2002. This edition
constitutes a technical revision. The main changes with respect to the previous edition are
listed below:
– the title of the specification has been updated to include coastal applications;
– fibres specification have been enlarged to include fibre Type B5;
– an annex has been added for additional requirements according to the MICE table.

---------------------- Page: 9 ----------------------

SIST EN 60794-3-30:2009
– 4 – 60794-3-30 © IEC:2008
This bilingual version, published in 2008-07, corresponds to the English version.
The text of this standard is based on the following documents:
FDIS Report on voting
86A/1203/FDIS 86A/1222/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
The French version of this standard has not been voted upon.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of IEC 60794 series, under the general title Optical fibre cables, can be
found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition; or
• amended.

---------------------- Page: 10 ----------------------

SIST EN 60794-3-30:2009
60794-3-30 © IEC:2008 – 5 –
OPTICAL FIBRE CABLES –

Part 3-30: Outdoor cables –
Family specification for optical telecommunication
cables for lakes, river crossings and coastal application



1 Scope
This family specification covers optical telecommunication cables to be used as underwater
cables for lakes, river crossings and coastal applications. Requirements of the sectional
specification IEC 60794-3 for duct, buried, aerial and lake, river crossings and coastal
applications cables are applicable to cables covered by this standard. This standard does not
cover methods of cable repair nor repair capability, nor does it cover cables for use with lake,

river crossings and coastal applications line amplifiers.
Clause 4 of this standard describes a blank detail specification for optical telecommunication
cables to be used for lakes, river crossings and coastal applications. It incorporates some
minimum requirements.
Annex A describes a blank detail specification which may be used to prepare detail
specifications.
Annex B describes the cable construction.
Annex C describes a blank detail specification for ISO/IEC 24702 applications (MICE).
The parameters specified in this standard may be affected by measurement uncertainty
arising either from measurement errors or calibration errors due to lack of suitable standards.
Acceptance criteria are interpreted with respect to this consideration (see IEC 60794-3,
Clause 9).
The number of fibres tested should be representative of the cable design and should be
agreed between the customer and the supplier.
2 Normative references
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
They complete the normative references already listed in the generic specification
(IEC 60794-1-1, Clause 2 and IEC 60794-1-2, Clause 2) and in the sectional specification
(IEC 60794-3, Clause 2).
IEC 60793-1-48, Optical fibres – Part 1-48: Measurement methods and test procedures –
Polarization mode dispersion
IEC 60793-2-50, Optical fibres – Part 2-50: Product specifications – Sectional specification for
class B single-mode fibres

---------------------- Page: 11 ----------------------

SIST EN 60794-3-30:2009
– 6 – 60794-3-30 © IEC:2008
3 Symbols and abbreviations
For the purposes of this document, the following symbols and abbreviations apply.
λ cabled fibre cut-off wavelength
cc
λ operational wavelength

operational
d nominal outer diameter of the cable
DS detail specification
long term tensile load
T
L
T the acceptable amount of short-term tensile load that can be applied to the cable
M
without permanent degradation of the characteristics of the fibres in the tensile
performance test
T temperature cycling test low-temperature limit according to IEC 60794-1-2,

A1
Method F1
T temperature cycling test low-temperature limit according to IEC 60794-1-2,
A2
Method F1
T temperature cycling test high-temperature limit according to IEC 60794-1-2,
B1
Method F1
T temperature cycling test high-temperature limit according to IEC 60794-1-2,

B2
Method F1
t temperature cycling test dwell time

1
n × d a value times cable outer diameter used for bends, mandrels, etc.
4 Family specification for optical telecommunication cables to be used in
lakes, river crossings and coastal application (blank detail specification and
minimum requirements)
4.1 Optical fibres
Attenuation values at 1 625 nm are optionally specified by the user.
4.1.1 Single-mode dispersion unshifted (B1.1) optical fibre

Characteristics IEC 60794-3 Family Test methods Remarks (13)
(9) Clause/sub- requirements (12)
clause (11)
(10)
Uncabled optical fibre 5.1 IEC 60793-2-50

Attenuation coefficient 5.2 According DS IEC 60793-1-40

(cabled fibres)
at 1 310 nm 5.2.1
≤ 0,40 dB/km
at 1 550 nm
≤ 0,30 dB/km

at 1 625 nm
≤ 0,40 dB/km 1 625 nm
performance is
optional
depending on
agreement
between
customer and
supplier

Attenuation discontinuities 5.2.2 IEC 60793-1-40
≤ 0,10 dB
at 1 310 and 1 550 nm

---------------------- Page: 12 ----------------------

SIST EN 60794-3-30:2009
60794-3-30 © IEC:2008 – 7 –
Characteristics IEC 60794-3 Family Test methods Remarks (13)
(9) Clause/sub- requirements (12)
clause (11)
(10)
Cabled fibre cut-off 5.3 λ < λ IEC 60793-1-44

cc operational
wavelength
Fibre colouring 5.4 IEC 60304 Visual inspection

Polarisation mode

dispersion
5.5 As IEC 60794-3 IEC 60793-1-48
PMD
Q
Outer diameter including 8.2.1.1 As IEC 60793-2-50 IEC 60793-1-21

colouring

4.1.2 Single-mode dispersion unshifted (B1.2) optical fibre

Characteristics IEC 60794-3 Family Test methods Remarks (13)
(9) Clause/sub- requirements (12)
clause (11)
(10)
Uncabled optical fibre 5.1 IEC 60793-2-50
Attenuation coefficient 5.2 According DS IEC 60793-1-40
(cabled fibres)
at 1 550 nm 5.2.1
≤ 0,30 dB/km
at 1 625 nm 1 625 nm
≤ 0,40 dB/km
performance is
optional
depending on
agreement
between
customer and
supplier
Attenuation discontinuities 5.2.2 ≤ 0,10 dB IEC 60793-1-40
at 1 310 and 1 550 nm
Cabled fibre cut-off 5.3 IEC 60793-1-44
λ < λ
cc operational
wavelength
Fibre colouring 5.4 IEC 60304 Visual inspection
Polarisation mode
dispersion
5.5 As IEC 60794-3 IEC 60793-1-48
PMD
Q
Outer diameter including 8.2.1.1 As IEC 60793-2-50 IEC 60793-1-21
colouring

---------------------- Page: 13 ----------------------

SIST EN 60794-3-30:2009
– 8 – 60794-3-30 © IEC:2008
4.1.3 Single-mode dispersion unshifted (B1.3) optical fibre4

Characteristics IEC 60794-3 Family Test methods Remarks (13)
(9) Clause/sub- requirements (12)
clause (11)
(10)
Uncabled optical fibre 5.1 IEC 60793-2-50
Attenuation coefficient 5.2 According DS IEC 60793-1-40
(cabled fibres)
at 1 310 5.2.1
≤ 0,40 dB/km

at 1 383 +/- 3 nm
≤ 0,40 dB/km

at 1 550
≤ 0,30 dB/km

at 1 625 nm
1 625 nm
≤ 0,40 dB/km
performance is
optional
depending on
agreement
between
customer and
supplier
Attenuation discontinuities 5.2.2 IEC 60793-1-40
≤ 0,10 dB
at 1 310 and 1 550 nm
Cabled fibre cut-off 5.3 IEC 60793-1-44
λ < λ
cc operational
wavelength
Fibre colouring 5.4 IEC 60304 Visual inspection
Polarisation mode
dispersion
5.5 As IEC 60794-3 IEC 60793-1-48
PMD
Q
Outer diameter including 8.2.1.1 As IEC 60793-2-50 IEC 60793-1-21
colouring

4.1.4 Single-mode dispersion shifted (B2) optical fibre
Characteristics IEC 60794-3 Family Test methods Remarks (13)
(9) Clause/sub- requirements (12)
clause (11)
(10)
Uncabled optical fibre 5.1 IEC 60793-2-50
Attenuation coefficient 5.2.1 According DS IEC 60793-1-40
(cabled fibres)
at 1 550 nm 5.2.1
≤ 0,30 dB/km
Attenuation discontinuities 5.2.2 IEC 60793-1-40
≤ 0,10 dB
at 1 550 nm
Cabled fibre cut-off 5.3 IEC 60793-1-44
λ < λ
cc operational
wavelength
Fibre colouring 5.4 IEC 60304 Visual inspection
Polarisation mode
dispersion
5.5 As IEC 60794-3 IEC 60793-1-48
PMD
Q
Outer diameter including 8.2.1.1 As IEC 60793-2-50 IEC 60793-1-21
colouring

---------------------- Page: 14 ----------------------

SIST EN 60794-3-30:2009
60794-3-30 © IEC:2008 – 9 –
4.1.5 Single-mode non-zero dispersion (B4) optical fibre
Characteristics IEC 60794-3 Family Test methods Remarks (13)
(9) Clause/sub- requirements (12)
clause (11)
(10)
Uncabled optical fibre 5.1 IEC 60793-2-50
Attenuation coefficient 5.2 According DS IEC 60793-1-40
(cabled fibres)
at 1 550 nm 5.2.1 ≤ 0,30 dB/km
at 1 625 nm 1 625 nm
≤ 0,40 dB/km
performance
is optional
depending on
agreement
between
customer and
supplier
Attenuation discontinuities 5.2.2 IEC 60793-1-40
≤ 0,10 dB
at 1 550 nm
Cabled fibre cut-off 5.3 IEC 60793-1-44
λ < λ
cc operational
wavelength
Fibre colouring 5.4 IEC 60304 Visual inspection
Polarisation mode
dispersion
5.5 As IEC 60794-3 IEC 60793-1-48
PMD
Q
Outer diameter including 8.2.1.1 As IEC 60793-2-50 IEC 60793-1-21
colouring

---------------------- Page: 15 ----------------------

SIST EN 60794-3-30:2009
– 10 – 60794-3-30 © IEC:2008
4.1.6 Single-mode non-zero dispersion shifted (B5) optical fibre
Characteristics IEC 60794-3 Family requirements Test methods Remarks
(9) Clause/sub (11) (12) (13)
clause
(10)
Uncabled optical fibre 5.1 IEC 60793-2-50
Attenuation coefficient 5.2.1 According DS IEC 60793-1-40
(cabled fibres)
at 1 460 nm 5.2.1 ≤ 0,40 dB/km
at 1 550 nm and
≤ 0,30 dB/km
at 1 625 nm 1625 nm
≤ 0,40 dB/km
performance
is optional
depending
on agreement
between
customer
and supplier
Attenuation 5.2.2 IEC 60793-1-40
≤ 0,10 dB
discontinuities
at 1 550 nm
Cabled fibre cut-off 5.3 IEC 60793-1-44
λ < λ
cc operational
wavelength
Fibre colouring 5.4 IEC 60304 Visual inspection
Polarisation mode
dispersion
5.5 As IEC 60794-3 IEC 60793-1-48
PMD
Q
Outer diameter including 8.2.1.1 As IEC 60793-2-50 IEC 60793-1-21
colouring
4.2 Cable element
Characteristics IEC 60794-3 Family Test methods Remarks
(9) Clause/subclause requirements (12) (13)
(10) (11)
Cable element
Compatibility 6 According DS Under consideration
Slotted core 6.3 According DS Visual inspection
Loose tube 6.4 According DS Visual inspection
Compound flow and According DS IEC 60794-1-2
evaporation
 Methods E14 and E15
Outer diameter
8.2.1.1 According DS IEC 60811-1-1
Tight buffer 6.1 According DS Visual inspection
Outer diameter 8.2.1.1 According DS IEC 60793-1-21
Ribbon 6.5 According DS Visual inspection
Filler
According DS
Insulated copper According DS
conductor
Central strength According DS
member

---------------------- Page: 16 ----------------------

SIST EN 60794-3-30:2009
60794-3-30 © IEC:2008 – 11 –

4.3 Installation and operating conditions
Characteristics IEC 60794-3 Family Test methods Remarks
(9) Clause/subclause requirements (12) (13)
(10) (11)
General 8.1 Agreement between
requirements customer and
supplier
Bend test 8.2.1.2 According DS IEC 60794-1-2
Method G1
Tube kinking 8.2.2.1 According DS IEC 60794-1-2
Method G7
Ribbons:
- Dimensions 8.2.3.1 IEC 60794-3, Table 1 IEC 60794-1-2
Method G2, G3 or G4
- Separability of 8.2.3.2.1 IEC 60794-3, IEC 60794-1-2
individual fibres 8.2.3.2.1 Method G5

from a ribbon or according DS or according DS
- Ribbon stripping 8.2.3.2.2 According DS According DS
- Torsion 8.2.3.2.3 According DS IEC 60794-1-2
Method G6

)5H1
4.4 Mechanical and environmental tests 0F
The number of fibres tested shall be representative of the cable design and shall be agreed
between the customer and the supplier.
—————————
)
1
The cables may be tested with the appropriate suspension equipment during tensile testing.

---------------------- Page: 17 ----------------------

SIST EN 60794-3-30:2009
– 12 – 60794-3-30 © IEC:2008
4.4.1 Tests applicable
Characteristics IEC 60794-3 Family Tests methods Remarks
(9) Clause/sub- requirements (12) (13)
clause (11)
(10)
Tensile performance 9.1 See 4.4.2.1 and IEC 60794-1-2 See 4.4.2.1
according DS
Method E1A and
E1B
Installation capability
Repeated bending 9.2.2 See 4.4.2.2 IEC 60794-1-2
Method E6
- Impact 9.2.3 See 4.4.2.3 IEC 60794-1-2
Method E4
- Torsion 9.2.5 See 4.4.2.4 IEC 60794-1-2
Method E7

- Temperature cycling 9.5 See 4.4.2.7 IEC 60794-1-2
Method F1
- Hydrostatic pressure 9.2.6 See 4.4.2.8
IEC 60794-1-2
Method F10
- Coiling performance 9.2.7 See 4.4.2.9
IEC 60794-1-2
Method E20
Bending under 9.2.1 See 4.6.2.10
IEC 60794-1-2
tension
Method E18
Cable bend 9.3 See 4.4.2.5 IEC 60794-1-2 See 4.4.2.5
Method E11
Crush 9.4 See 4.4.2.6 IEC 60794-1-2 See 4.4.2.6
Method E3
Ageing 9.6
- Coating adhesion 9.6.1 According DS IEC 60794-1-2
stability Method E5
- Finished cable 9.6.2 Under consideration IEC 60794-1-2
Method F9
Water penetration 9.7 Under consideration IEC 60794-1-2
Method F5B
Hydrogen resistance Under consideration

---------------------- Page: 18 ----------------------

SIST EN 60794-3-30:2009
60794-3-30 © IEC:2008 – 13 –
4.4.2 Details on family requirements and test conditions for optical fibre cable tests6H
The expression of "no change in attenuation" means that any change in measurement value,
either positive or negative, within the uncertainty of measurement shall be ignored. The
uncertainty of measurement for this standard shall be < 0,05 dB for attenuation.
4.4.2.1 Tensile performance7H
a) Family requirements
Under long term tensile load (T ) the fibre strain shall not exceed 20 % of the fibre proof strain
L
and there shall be no change in attenuation during the test. Under installation load (T ) the
M
fibre strain shall not exceed 60 % of the fibre proof strain and the attenuation change during
test shall be measured and recorded. Other criteria may be agreed between the customer and
the supplier.
Under visual examination without magnification there shall be no damage to the sheath or to
the cable elements.
b) Test conditions
Cable length under tension: not less than 50 m. Taking into account the measurement
accuracy and end effects, shorter lengths may be used by
agreement between the customer and the supplier.
Fibre length: finished cable length.
Tensile load on cable: long term tensile load (T ) and installation load (T ). Other
L M
loads may be applied in accordance with particular user
conditions.
T design water depth × weight of cable in water (N).

L
T 2,5 × design water depth × weight of cable in water (N).
≥
M
Diameter of test pulleys: 1 m but not less than the minimum loaded bending diameter
specified for the cable.
4.4.2.2 Repeated bending
a) Family requirements
Under visual examination without magnification there shall be no damage to the sheath
and to the cable elements.
b) Test conditions
Bending radius: 20 d to 30 d for general use.
Load: sufficient to
...