iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60512-1-100:2002

(Main)

Connectors for electronic equipment - Tests and measurements -- Part 1-100: General - Applicable publications

Connectors for electronic equipment - Tests and measurements -- Part 1-100: General - Applicable publications

Provides the test numbers and the applicable parts of the EN 60512 series.

Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren -- Teil 1-100: Allgemeines - Zutreffende Publikationen

Connecteurs pour équipements électroniques - Essais et mesures -- Partie 1-100: Généralités - Publications applicables

Fournit la liste des numéros d'essai et des parties de la série EN 60512 concernées.

Connectors for electronic equipment - Tests and measurement - Part 1-100: General - Applicable publications (IEC 60512-1-100:2001)

General Information

Status
Withdrawn
Publication Date
31-Aug-2002
Withdrawal Date
30-Sep-2006
ICS
31.220.10 - Plug-and-socket devices. Connectors
Technical Committee
SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Oct-2006
Due Date
01-Oct-2006
Completion Date
01-Oct-2006
Ref Project
EN 60512-1-100:2001 - Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications

Relations

Replaced By
SIST EN 60512-1-100:2006 - Connectors for electronic equipment - Tests and measurements -- Part 1-100: General - Applicable publications
Effective Date
29-Jan-2023
Replaced By
SIST EN 60512-1-100:2006 - Connectors for electronic equipment - Tests and measurements -- Part 1-100: General - Applicable publications
Effective Date
06-May-2014

Buy Standard

EN 60512-1-100:2002EN 60512-1-100:2002
PreviousNext
Standard
EN 60512-1-100:2002
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60512-1-100:2002
01-september-2002
Connectors for electronic equipment - Tests and measurement - Part 1-100:
General - Applicable publications (IEC 60512-1-100:2001)
Connectors for electronic equipment - Tests and measurements -- Part 1-100: General -
Applicable publications
Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren -- Teil 1-100:
Allgemeines - Zutreffende Publikationen
Connecteurs pour équipements électroniques - Essais et mesures -- Partie 1-100:
Généralités - Publications applicables
Ta slovenski standard je istoveten z: EN 60512-1-100:2001
ICS:
31.220.10 9WLþLLQYWLþQLFHNRQHNWRUML Plug-and-socket devices.
Connectors
SIST EN 60512-1-100:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljen
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 175301-803:2007(Main)
Detail Specification: Rectangular connectors - Flat contacts, 0,8 mm thickness, locking screw not detachable
EN 175301-803:2006

This standard covers a range of rectangular with flat contacts, 0,8 mm thickness, locking screw not detachable, intended for use in industrial installations for connections or termination of sub-assemblies of components in electrical equipment in measuring, regulating and control circuits, in equipment for power supply, in fluid and air power and components and other electronic devices employing similar techniques.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60512-12-1:2006(Main)
Connectors for electronic equipment - Tests and measurements -- Part 12-1: Soldering tests - Test 12a: Solderability, wetting, solder bath method
EN 60512-12-1:2006

This part of IEC 60512, when required by the detail specification, is used for testing connectors within the scope of technical committee 48. They may also be used for similar devices when specified in a detail specification. The object of this test is to detail a standard test method to assess the solderability of the terminations of a connector designed for use with printed boards or for other applications using similar soldering techniques.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61076-1:2006(Main)
Connectors for electronic equipment - Product requirements -- Part 1: Generic specification
EN 61076-1:2006

This part of IEC 61076 establishes uniform specifications and technical information for connectors. This part of IEC 61076 is applicable to a family of connectors for use in electronic and electrical equipment; connectors designed for use at radio frequencies are not covered.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60512-14-6:2006(Main)
Connectors for electronic equipment - Tests and measurements -- Part 14-6: Sealing tests - Test 14f: Interfacial sealing
EN 60512-14-6:2006

This part of IEC 60512, when required by the detail specification, is used for testing connectors. It may also be used for similar devices when specified in a detail specification. It is particularly, but not exclusively, suitable for connectors with removable contacts. The object of this document is to detail a standard test method to assess the effectiveness of the interfacial sealing of a connector against ingress of water by exposure to low pressure whilst immersed in a salt solution. It is intended to assess the effectiveness of the interfacial sealing means of connectors. Further, if any wires or contacts are not fitted, it assesses the sealing of one cavity of a connector from another.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60512-14-4:2006(Main)
Connectors for electronic equipment - Tests and measurements -- Part 14-4: Sealing tests - Test 14d: Immersion - Waterproof
EN 60512-14-4:2006

This part of IEC 60512, when required by the detail specification, is used for testing connectors within the scope of IEC technical committee 48. It may also be used for similar devices when specified in a detail specification. The object of this part of IEC 60512 is to detail a standard test method to assess the effectiveness of the sealing of a connector against ingress of water under specified conditions of pressure and time.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60512-14-5:2006(Main)
Connectors for electronic equipment - Tests and measurements -- Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure
EN 60512-14-5:2006

This part of IEC 60512, when required by the detail specification, is used for testing l connectors within the scope of IEC technical committee 48. It may also be used for similar devices when specified in a detail specification. The object of this part of IEC 60512 is to detail a standard test method to assess the effectiveness of the sealing of a connector against ingress of water by exposure to low pressure whilst immersed in a salt solution. It is particularly, but not exclusively, suitable for mated connector assemblies.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60512-14-2:2006(Main)
Connectors for electronic equipment - Tests and measurements -- Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage
EN 60512-14-2:2006

This part of IEC 60512, when required by the detail specification, is used for testing connectors within the scope of IEC technical committee 48. It may also be used for similar devices when specified in a detail specification. The object of this part of IEC 60512 is to detail a standard test method to assess the effectiveness of seals against gas pressure differentials.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62197-1:2006(Main)
Connectors for electronic equipment - Quality assessment requirements -- Part 1: Generic specification
EN 62197-1:2006

This part of IEC 62197 establishes uniform testing requirements to support quality assessment procedures for connectors. This part of IEC 62197 is applicable to a family of connectors for use in electronic and electrical equipment; connectors designed for use at radio frequencies are not covered.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60512-13-2:2006(Main)
Connectors for electronic equipment - Tests and measurements -- Part 13-2: Mechanical operation tests - Test 13b: Insertion and withdrawal forces
EN 60512-13-2:2006

This part of IEC 60512, when required by the detail  specification, is used for testing connectors within the scope  of IEC technical committee 48. It may also be used for similar  devices when specified in a detail specification. The object of  this part of IEC 60512 is to detail a standard test method to  measure the insertion and withdrawal forces of mating  connectors, or of a connector with the mating insertion and/or  withdrawal gauge(s) specified in the connector detail  specification, without the effect of any locking, latching,  sealing, engaging, separating or similar device. The connector  may be a single pair of contacts without the influence of any  housing, or a contact or contacts in a housing where parts of  this housing have been disabled or removed in order to  eliminate their influence on the test and measurements.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60512-13-1:2006(Main)
Connectors for electronic equipment - Tests and measurements -- Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces
EN 60512-13-1:2006

This part of IEC 60512, when required by the detail  specification, is used for testing connectors within the scope  of IEC technical committee 48. It may also be used for similar  devices when specified in a detail specification. The object of  this part of IEC 60512 is to detail a standard test method to  measure the force to fully engage or separate mating  connectors, including the effect of any locking, latching,  sealing, engaging, separating or similar device, that assists or  resists such operation. This test method may also be used to  measure separate parts of the force(s) required to fully engage  or separate mating connectors; e.g. the locking force of a  (separate) coupling device.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day