SIST EN 494:2005/A1:2006

Fibre-cement profiled sheets and fittings - Product specification and test methods

This document specifies the technical requirements and establishes methods of control and test as well as acceptance conditions for fibre-cement profiled sheets and their fibre-cement fittings for one or more of the following uses: - roofing, - internal wall finishes, - external wall and ceiling finishes. For the purpose of this document fibre-cement profiled sheets are classified according to their height of corrugation and their mechanical characteristics. This document covers fibre-cement profiled sheets reinforced with fibres of different type as specified in 5.1.1, with and without factory applied coating. This document does not include calculations with regard to works, design requirements, installation techniques, wind uplift or rain proofing of the installed sheets.

Faserzement-Wellplatten und dazugehörige Formteile - Produktspezifikation und Prüfverfahren

Plaques profilées en fibres-ciment et accessoires - Spécifications du produit et méthodes d'essai

Vlaknato-cementne valovite strešne plošče in fazonski kosi – Specifikacija za izdelek in preskusne metode

General Information

• Status: Withdrawn
• Publication Date: 31-Dec-2005
• Withdrawal Date: 02-Jul-2007
• ICS: 91.060.20 - Roofs
• ICS: 91.100.40 - Products in fibre-reinforced cement
• Technical Committee: IKER - Ceramics
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 02-Jul-2007
• Due Date: 25-Jul-2007
• Completion Date: 03-Jul-2007
• Directive: 89/106/EEC - Construction products
• Mandate: M/121 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on internal and external wall and ceiling finishes
• Mandate: M/122 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on roof coverings, rooflights, roof windows and ancillary products
• Ref Project: EN 494:2004/A1:2005 - Fibre-cement profiled sheets and fittings - Product specification and test methods

Relations

• Consolidated By: SIST EN 494:2005+A3:2007 - Fibre-cement profiled sheets and fittings - Product specification and test methods
• Effective Date: 18-Jan-2023
• Consolidated By: SIST EN 494:2005+A3:2007 - Fibre-cement profiled sheets and fittings - Product specification and test methods
• Effective Date: 19-Jan-2023
• Consolidated By: SIST EN 494:2005+A3:2007 - Fibre-cement profiled sheets and fittings - Product specification and test methods
• Effective Date: 01-Jul-2007
• Amends: SIST EN 494:2005 - Fibre-cement profiled sheets and fittings - Product specification and test methods
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 494:2005/A1:2006
01-januar-2006
9ODNQDWRFHPHQWQHYDORYLWHVWUHãQHSORãþHLQID]RQVNLNRVL±6SHFLILNDFLMD]D
L]GHOHNLQSUHVNXVQHPHWRGH
Fibre-cement profiled sheets and fittings - Product specification and test methods
Faserzement-Wellplatten und dazugehörige Formteile - Produktspezifikation und
Prüfverfahren
Plaques profilées en fibres-ciment et accessoires - Spécifications du produit et méthodes
d'essai
Ta slovenski standard je istoveten z: EN 494:2004/A1:2005
ICS:
91.060.20 Strehe Roofs
91.100.40 &HPHQWQLL]GHONLRMDþDQL] Products in fibre-reinforced
YODNQL cement
SIST EN 494:2005/A1:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 494:2005/A1:2006

---------------------- Page: 2 ----------------------

SIST EN 494:2005/A1:2006
EUROPEAN STANDARD
EN 494:2004/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2005
ICS 91.100.40

English Version
Fibre-cement profiled sheets and fittings - Product specification
and test methods
Plaques profilées en fibres-ciment et accessoires - Faserzement-Wellplatten und dazugehörige Formteile -
Spécifications du produit et méthodes d'essai Produktspezifikation und Prüfverfahren
This amendment A1 modifies the European Standard EN 494:2004; it was approved by CEN on 20 July 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 494:2004/A1:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 494:2005/A1:2006
EN 494:2004/A1:2005 (E)
Contents Page
1 Modification to the foreword.4
2 Modifications in Clause 5 .4
3 Modification in Clause 8 .
...