SIST EN ISO 7040:2001

Prevailing torque type hexagon nuts (with non-metallic insert), style 1 - Property classes 5, 8 and 10 (ISO 7040:1997)

Sechskantmuttern mit Klemmteil (mit nichtmetallischem Einsatz), Typ 1 - Festigkeitsklasse 5, 8 und 10 (ISO 7040:1997)

Diese Internationale Norm beschreibt die Eigenschaften von Sechskantmuttern mit Klemmteil, mit nichtmetallischem Einsatz, Typ 1, mit Gewinde von M3 bis M36, in Produktklasse A für Gewinde bis M16 und Produktklasse B für Gewinde über M16 und mit Festigkeitsklassen 5, 8 und 10. ANMERKUNG: Die Maße der Muttern entsprechen den in ISO 4032 angegebenen Maßen plus Klemmteil. Werden in besonderen Fällen andere Festlegungen benötigt, so sind diese den bestehenden Internationalen Normen zu enthehmen, z.B. ISO 261, ISO 965-2, ISO 2320 und ISO 4759-1.

Ecrous hexagonaux autofreinés (avec anneau non métallique), style 1 - Classes de qualité 5, 8 et 10 (ISO 7040:1997)

La présente Norme internationale prescrit les caractéristiques des écrous hexagonaux autofreinés (à anneau non métallique), style 1, de filetage M3 à M36 inclus, de grade A pour filetages < M16 et de grade B pour filetages > M16, et de classes de qualité 5, 8 et 10.
NOTE -- Les dimensions des écrous sont conformes à celles données dans l'ISO 4032 plus le système de freinage. Si d'autres spécifications sont requises, il est recommandé de les choisir dans les Normes internationales existantes, par exemple ISO 261, ISO 965-2, ISO 2320 et ISO 4759-1.

Šestrobe zaščitne matice s plastičnim vložkom, tip 1 - Razredi trdnosti 5, 8 in 10 (ISO 7040:1997)

General Information

• Status: Withdrawn
• Publication Date: 30-Jun-2001
• Withdrawal Date: 19-Mar-2013
• ICS: 21.060.20 - Nuts
• Technical Committee: ISEL - Mechanical elements
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 19-Mar-2013
• Due Date: 11-Apr-2013
• Completion Date: 20-Mar-2013
• Ref Project: EN ISO 7040:1997 - Prevailing torque type hexagon nuts (with non-metallic insert), style 1 - Property classes 5, 8 and 10 (ISO 7040:1997)

Relations

• Replaced By: SIST EN ISO 7040:2013 - Prevailing torque type hexagon regular nuts (with non-metallic insert) - Property classes 5, 8 and 10 (ISO 7040:2012)
• Effective Date: 01-May-2013
• Replaced By: SIST EN ISO 7040:2013 - Prevailing torque type hexagon regular nuts (with non-metallic insert) - Property classes 5, 8 and 10 (ISO 7040:2012)
• Effective Date: 08-Jun-2022
• Replaces: SIST ISO 7040:1996 - Prevailing torque type hexagon nuts (with non-metallic insert), style 1 -- Property classes 5, 8 and 10
• Effective Date: 01-Jul-2001
• Revised: SIST EN ISO 7040:2013 - Prevailing torque type hexagon regular nuts (with non-metallic insert) - Property classes 5, 8 and 10 (ISO 7040:2012)
• Effective Date: 25-Jan-2012

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 7040:2001
01-julij-2001
1DGRPHãþD
SIST ISO 7040:1996
âHVWUREH]DãþLWQHPDWLFHVSODVWLþQLPYORåNRPWLS5D]UHGLWUGQRVWLLQ
,62
Prevailing torque type hexagon nuts (with non-metallic insert), style 1 - Property classes
5, 8 and 10 (ISO 7040:1997)
Sechskantmuttern mit Klemmteil (mit nichtmetallischem Einsatz), Typ 1 -
Festigkeitsklasse 5, 8 und 10 (ISO 7040:1997)
Ecrous hexagonaux autofreinés (avec anneau non métallique), style 1 - Classes de
qualité 5, 8 et 10 (ISO 7040:1997)
Ta slovenski standard je istoveten z: EN ISO 7040:1997
ICS:
21.060.20 Matice Nuts
SIST EN ISO 7040:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 7040:2001

---------------------- Page: 2 ----------------------

SIST EN ISO 7040:2001

---------------------- Page: 3 ----------------------

SIST EN ISO 7040:2001

---------------------- Page: 4 ----------------------

SIST EN ISO 7040:2001

---------------------- Page: 5 ----------------------

SIST EN ISO 7040:2001

---------------------- Page: 6 ----------------------

SIST EN ISO 7040:2001
INTERNATIONAL ISO
STANDARD 7040
Second edition
1997-11-15
Prevailing torque type hexagon nuts (with
non-metallic insert), style 1 — Property
classes 5, 8 and 10
Écrous hexagonaux autofreinés (à anneau non métallique), style 1 —
Classes de qualité 5, 8 et 10
A
Reference number
ISO 7040:1997(E)

---------------------- Page: 7 ----------------------

SIST EN ISO 7040:2001
ISO 7040:1997(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national standards bodies (ISO member bodies). The work of
preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which
a technical committee has been established has the right to be represented
on that committee. International organizations, governmental and non-
governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 7040 was prepared by Technical Committee
ISO/TC 2, Fasteners, subcommittee SC 1, Mechanical properties of
fasteners.
This second edition cancels and replaces the first edition (ISO 7040:1983),
which has been technically revised.
Annex A of this International Standard is for information only.
©  ISO 1997
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet [e-mail]
X.400 c=ch; a=400net; p=iso; o=isocs; s=central
Printed in Switzerland
ii

---------------------- Page: 8 ----------------------

SIST EN ISO 7040:2001
©
INTERNATIONAL STANDARD  ISO ISO 7040:1997(E)
Prevailing torque type hexagon nuts (with non-metallic insert), style 1 –
Property classes 5, 8 and 10
1 Scope
This International Standard specifies the characteristics of prevailing torque type hexagon nuts (with
non-metallic insert), style 1, with threads from M3 up to and including M36, in product grade A for threads up
to and including M16 and product grade B for threads above M16, and with property classes 5, 8 and 10.
NOTE —  The dimensions of the nuts correspond to those given in ISO 4032 plus prevailing torque feature.
If other specifications are required, they should be selected from existing International Standards, for example
ISO 261, ISO 965-2, ISO 2320 and ISO 4759-1.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this
International Standard. At
...