iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

oSIST prEN ISO 4064-3:2023

(Main)

Water meters for cold potable water and hot water - Part 3: Test report format (ISO/DIS 4064-3:2023)

Water meters for cold potable water and hot water - Part 3: Test report format (ISO/DIS 4064-3:2023)

ISO 4064-3:2014|OIML R 49-3:2013 specifies a test report format to be used in conjunction with ISO 4064-1:2014|OIML R 49-1:2013 and ISO 4064-2:2014|OIML R 49-2:2013 for water meters for cold potable water and hot water.

Wasserzähler zum Messen von kaltem Trinkwasser und heißem Wasser - Teil 3: Format des Prüfberichtes (ISO/DIS 4064-3:2023)

Dieser Teil von ISO 4064|OIML R 49 legt ein Prüfberichtformat fest, das in Verbindung mit ISO 4064 1|OIML R 49 1 und ISO 4064 2|OIML R 49 2 für Wasserzähler zum Messen von kaltem Trinkwasser und heißem Wasser anzuwenden ist.

Compteurs d'eau potable froide et d'eau chaude - Partie 3: Format du rapport d'essais (ISO/DIS 4064-3:2023)

L'ISO 4064-3:2014|OIML R 49-3:2013 spécifie le format du rapport d'essai à utiliser dans le contexte de la mise en oeuvre de l'ISO 4064‑1:2014|OIML R 49-1:2013 et de l'ISO 4064‑2:2014|OIML R 49-2:2013 pour les compteurs d'eau potable froide et d'eau chaude.

Vodomeri za merjenje hladne pitne vode in vroče vode - 3. del: Obrazec za poročilo o preskusu (ISO/DIS 4064-3:2023)

General Information

Status
Not Published
Public Enquiry End Date
28-Dec-2023
ICS
17.120.10 - Flow in closed conduits
91.140.60 - Water supply systems
Technical Committee
IMIN - Measurement instruments
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
20-Oct-2023
Due Date
08-Mar-2024
Ref Project
prEN ISO 4064-3 - Water meters for cold potable water and hot water - Part 3: Test report format (ISO/DIS 4064-3:2023)

Relations

Revises
SIST EN ISO 4064-3:2014 - Water meters for cold potable water and hot water - Part 3: Test report format (ISO 4064-3:2014)
Effective Date
19-Jan-2023

Buy Standard

prEN ISO 4064-3:2023prEN ISO 4064-3:2023
PreviousNext
Draft
prEN ISO 4064-3:2023
English language
79 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 4064-3:2023
01-december-2023
Vodomeri za merjenje hladne pitne vode in vroče vode - 3. del: Obrazec za
poročilo o preskusu (ISO/DIS 4064-3:2023)
Water meters for cold potable water and hot water - Part 3: Test report format (ISO/DIS
4064-3:2023)
Wasserzähler zum Messen von kaltem Trinkwasser und heißem Wasser - Teil 3: Format
des Prüfberichtes (ISO/DIS 4064-3:2023)
Compteurs d'eau potable froide et d'eau chaude - Partie 3: Format du rapport d'essais
(ISO/DIS 4064-3:2023)
Ta slovenski standard je istoveten z: prEN ISO 4064-3
ICS:
17.120.10 Pretok v zaprtih vodih Flow in closed conduits
91.140.60 Sistemi za oskrbo z vodo Water supply systems
oSIST prEN ISO 4064-3:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 4064-3:2023

---------------------- Page: 2 ----------------------
oSIST prEN ISO 4064-3:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 4064-3
ISO/TC 30/SC 7 Secretariat: BSI
Voting begins on: Voting terminates on:
2023-10-09 2024-01-01
Water meters for cold potable water and hot water —
Part 3:
Test report format
Compteurs d'eau potable froide et d'eau chaude —
Partie 3: Format du rapport d'essais
ICS: 91.140.60
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 4064-3:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
oSIST prEN ISO 4064-3:2023
ISO/DIS 4064-3:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 4064-3
ISO/TC 30/SC 7 Secretariat: BSI
Voting begins on: Voting terminates on:

Water meters for cold potable water and hot water —
Part 3:
Test report format
Compteurs d'eau potable froide et d'eau chaude —
Partie 3: Format du rapport d'essais
ICS: 91.140.60
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 4064-3:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 4 ----------------------
oSIST prEN ISO 4064-3:2023
ISO/DIS 4064-3:2023(E)
Contents Page
Foreword .v
Introduction . vi
1 Scope . 1
2 Normative references .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 4064-5:2017/A11:2023(Amendment)
Water meters for cold potable water and hot water - Part 5: Installation requirements (ISO 4064-5:2014)
EN ISO 4064-5:2017/A11:2022
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 4064-1:2017/A11:2023(Amendment)
Water meters for cold potable water and hot water - Part 1: Metrological and technical requirements (ISO 4064-1:2014)
EN ISO 4064-1:2017/A11:2022
  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 4064-2:2017/A11:2023(Amendment)
Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014)
EN ISO 4064-2:2017/A11:2022
  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 4064-1:2017(Main)
Water meters for cold potable water and hot water - Part 1: Metrological and technical requirements (ISO 4064-1:2014)
EN ISO 4064-1:2017

This part of ISO 4064|OIML R 49 specifies the metrological and technical requirements for water meters
for cold potable water and hot water flowing through a fully charged, closed conduit. These water meters
incorporate devices which indicate the integrated volume.
In addition to water meters based on mechanical principles, this part of ISO 4064|OIML R 49 applies to
devices based on electrical or electronic principles, and mechanical principles incorporating electronic
devices, used to measure the volume of cold potable water and hot water.
This part of ISO 4064|OIML R 49 also applies to electronic ancillary devices. Ancillary devices are
optional. However, it is possible for national or regional regulations to render some ancillary devices
mandatory in relation to the utilization of water meters.
NOTE Any national regulations apply in the country of use.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 4064-2:2017(Main)
Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014)
EN ISO 4064-2:2017

This part of ISO 4064|OIML R 49 is applicable to the type evaluation and initial verification testing of
water meters for cold potable water and hot water as defined in ISO 4064-1:2014|OIML R 49‑1:2013.
OIML Certificates of Conformity can be issued for water meters under the scope of the OIML Certificate
System, provided that this part of ISO 4064|OIML R 49, ISO 4064-1:2014|OIML R 49‑1:2013 and
ISO 4064-3:2014|OIML R 49‑3:2013 are used in accordance with the rules of the System.
This part of ISO 4064|OIML R 49 sets out details of the test programme, principles, equipment and
procedures to be used for the type evaluation, and initial verification of a meter type.
The provisions of this part of ISO 4064|OIML R 49 also apply to ancillary devices, if required by national
regulations.
The provisions include requirements for testing the complete water meter and for testing the
measurement transducer (including the flow or volume sensor) and the calculator (including the
indicating device) of a water meter as separate units.

  • Standard
    115 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    115 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 4064-5:2017(Main)
Water meters for cold potable water and hot water - Part 5: Installation requirements (ISO 4064-5:2014)
EN ISO 4064-5:2017

This part of ISO 4064 applies to water meters used to meter the volume of cold potable water and hot
water flowing through a fully charged, closed conduit. These water meters incorporate devices which
indicate the integrated volume.
This part of ISO 4064 specifies criteria for the selection of single, combination and concentric water
meters, associated fittings, installation, special requirements for meters, and the first operation of new
or repaired meters to ensure accurate constant measurement and reliable reading of the meter.
In addition to meters based on mechanical principles, this part of ISO 4064 also applies to water
meters based on electrical or electronic principles, and to water meters based on mechanical principles
incorporating electronic devices, used to measure the volume of cold potable water and hot water. It also
applies to electronic ancillary devices. Ancillary devices are optional. However, national or international
regulations may make some ancillary devices mandatory in relation to the utilization of the water meter.
The recommendations of this part of ISO 4064 apply to water meters, irrespective of technology, defined
as integrating measuring instruments continuously determining the volume of water flowing through
them.
NOTE Any national regulations apply in the country of use.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 4064-4:2014(Main)
Water meters for cold potable water and hot water - Part 4: Non- metrological requirements not covered in ISO 4064-1 (ISO 4064- 4:2014)
EN ISO 4064-4:2014

EN ISO 4064-4 applies to water meters used to meter the volume of cold potable water and hot water flowing through a fully charged, closed conduit. These water meters incorporate devices which indicate the integrated volume. This part of ISO 4064 specifies technical characteristics and pressure loss requirements for meters for cold potable water and hot water. It applies to water meters which can withstand: a) a maximum admissible pressure (MAP) equal to at least 1 MPa1) [0,6 MPa for meters for use with pipe nominal diameters (DNs) ≥500 mm]; b) a maximum admissible temperature (MAT) for cold potable water meters of 30 °C; c) a MAT for hot water meters of up to 180 °C, depending on class. In addition to meters based on mechanical principles, this part of ISO 4064 also applies to water meters based on electrical or electronic principles, and to water meters based on mechanical principles incorporating electronic devices, used to meter the volume flow of hot water and cold potable water. It also applies to electronic ancillary devices. As a rule ancillary devices are optional. However, national or international regulations may make some ancillary devices mandatory in relation to the utilization of the water meter.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 4064-3:2014(Main)
Water meters for cold potable water and hot water - Part 3: Test report format (ISO 4064-3:2014)
EN ISO 4064-3:2014

EN ISO 4064-3 specifies a test report format to be used in conjunction with ISO 4064-1|OIML R 49-1 and ISO 4064-2|OIML R 49-2 for water meters for cold potable water and hot water.

  • Standard
    82 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN ISO 4064-5:2023(Main)
Water meters for cold potable water and hot water - Part 5: Installation requirements (ISO/DIS 4064-5:2023)
prEN ISO 4064-5

ISO 4064-5:2014 applies to water meters used to meter the volume of cold potable water and hot water flowing through a fully charged, closed conduit. These water meters incorporate devices which indicate the integrated volume.
ISO 4064-5:2014 specifies criteria for the selection of single, combination and concentric water meters, associated fittings, installation, special requirements for meters, and the first operation of new or repaired meters to ensure accurate constant measurement and reliable reading of the meter.
In addition to meters based on mechanical principles, ISO 4064-5:2014 also applies to water meters based on electrical or electronic principles, and to water meters based on mechanical principles incorporating electronic devices, used to measure the volume of cold potable water and hot water. It also applies to electronic ancillary devices. Ancillary devices are optional. However, national or international regulations may make some ancillary devices mandatory in relation to the utilization of the water meter.
The recommendations of ISO 4064-5:2014 apply to water meters, irrespective of technology, defined as integrating measuring instruments continuously determining the volume of water flowing through them.

  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN ISO 4064-2:2023(Main)
Water meters for cold potable water and hot water - Part 2: Test methods (ISO/DIS 4064-2:2023)
prEN ISO 4064-2
  • Draft
    110 pages
    English language
    sale 10% off
    e-Library read for
    1 day