SIST EN 3475-512:2004
(Main)Aerospace series - Cables, electrical, aircraft use - Test methods - Part 512: Flexure endurance
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 512: Flexure endurance
This standard specifies a method of testing flexure endurance of the cable when it is subjected to alternating flexing.
It shall be used together with EN 3475-100.
Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren - Teil 512: Wechselbiegefestigkeit
Diese Norm legt ein Prüfverfahren für die Wechselbiegefestigkeit einer Leitung fest.
Sie ist in Verbindung mit EN 3475-100 anzuwenden.
Série aérospatiale - Câbles électriques a usage aéronautique - Méthodes d'essais - Partie 512: Résistance a la flexion
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 512: Flexure endurance
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Cables, electrical, aircraft use - Test methods - Part 512: Flexure enduranceLuft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren - Teil 512: WechselbiegefestigkeitSérie aérospatiale - Câbles électriques a usage aéronautique - Méthodes d'essais - Partie 512: Résistance a la flexionAerospace series - Cables, electrical, aircraft use - Test methods - Part 512: Flexure endurance49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3475-512:2002SIST EN 3475-512:2004en01-maj-2004SIST EN 3475-512:2004SLOVENSKI
STANDARD
SIST EN 3475-512:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3475-512June 2002ICS 49.060English versionAerospace series - Cables, electrical, aircraft use - Testmethods - Part 512: Flexure enduranceSérie aérospatiale - Câbles électriques à usageaéronautique - Méthodes d'essais - Partie 512: Résistanceà la flexionLuft- und Raumfahrt - Elektrischen Leitungen für LuftfahrtVerwendung - Teil 512: WechselbiegefestigkeitThis European Standard was approved by CEN on 20 January 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3475-512:2002 ESIST EN 3475-512:2004
EN 3475-512:2002 (E)2ForewordThis document (EN 3475-512:2002) has been prepared by the European Association of AerospaceManufacturers (AECMA).After enquiries and votes carried out in accordance with the rules of this Association, this Standard hasreceived the approval of the National Associations and the Official Services of the member countries ofAECMA, prior to its presentation to CEN.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, at the latest by December 2002, and conflicting national standards s
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.