I08 - Imaginarni 08

This CWA will consist of two parts:
- Part 1: will be an endorsement of ISO/PAS 5643 Measures to reduce the spread of Covid-19 in the tourism industry
- Part 2: will include other elements not covered by the ISO/PAS in order to complement it with European needs.
The task of this Workshop is to identify gaps or additional requirements, elements, or sectors to be added to those outlined in CWA 5643 – Part 1.
In alignment with ISO DPAS 5643, the CWA will apply to the whole tourism value chain, including the following subsectors:
- Accommodation, including campsites, hostels, hotels and rural accommodation
- Catering services and restaurants
- Medical spas
- Golf courses
- Ski areas
- Yacht harbours and nautical activities
- Adventure and ecotourism
- Beaches
- Natural protected areas
- Unique public spaces
- Museums and heritage sites
- Night leisure
- Tourist bus companies, rent a car, cableway and tourism water transport
- Tourist guides
- Tourist information offices
- Tourist visits
- Travel agencies
- MICE tourism
- Theme and leisure parks (including water parks, animal parks (zoos and aquariums) and family entertainment centres.

This document provides a visual identity to be displayed by European tourist organizations in accordance with CWA 5643-1 and establishes requirements and guidance on the use of the visual identity.
This document also includes informative annexes relating to implementation (checklist), references to national standards and protocols and information addressed to the user of the service offered by the tourist organizations.

This European Standard defines the quality assurance (QA) requirements for the operation, maintenance, management and configuration control of test centres for space applications. It also defines the requirements for the treatment of test specimens and the development of test facilities.
This European Standard applies to test centres as self-standing organizations, or those belonging to a parent organization. Separate procedures are not required in the latter case if activities are controlled by the implementation of parent organization procedures.
When viewed in a specific project context, the requirements defined in this European Standard should be tailored to match the genuine requirements of a particular profile and circumstances of a project.

This standard specifies a method of checking the resistance of optical connection elements (including permanent connections) and fibre optic couplers to fluids and lubricants.
It shall be used together with EN 2591-100.

This standard specifies a method of determining the stripping force of solderless wrapped connections used in elements of electrical and optical connection.
It shall be used together with EN 2591-100.

This standard specifies the required characteristics and performance requirements for single in-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B.
It shall be used together with EN 3567-001.

This standard specifies a method of checking the long term stability of optical connection elements (including permanent connections) and fibre optic couplers.
It shall be used together with EN 2591-100.

This standard specifies a method of verifying that an oversize test pin cannot enter a female contact of the restricted entry type used in elements of electrical and optical connection.
It shall be used together with EN 2591-100.

This standard specifies the characteristics of welded elbows 90° for pipe couplings, 60°, spherical, in TI-P64001, for aerospace applications.
NOTE  Assembly in accordance with TR 4052

This standard specifies the characteristics of elbows 90°, bulkhead, welded end, for pipe couplings 8°30', in titanium alloy,
for aerospace applications.
Nominal pressure: up to 28 000 kPa
Temperature range:   55 °C to 135 °C

This standard specifies the requirements relating to:
Steel FE-WA3801 (X4CrNiMn20-10-2)
Filler metal for welding
Wire and rod
for aerospace applications.

This standard specifies the rules for the drafting and presentation of metallic semi-finished dimensional standards for aerospace applications.
This standard applies to wrought semi-finished metallic products (such as sheets, plates, bars, tubes, etc.) characterized by their form within a range of standardized dimensions.

This standard specifies the characteristics of blind ferrules with dynamic beam seal end for pipe couplings 8°30', in titanium alloy, for aerospace applications.

This standard specifies a method of measuring the surface transfer impedance of couplers.
It shall be used together with EN 2591-100.

This standard specifies the characteristics of port connection for pipe couplings, 60°, spherical, in titanium alloy, for aerospace applications.
It is applicable to 60°Ispherical tube coupling in titanium alloy defined by the EN 3853 standard, to be mounted with O-ring defined in accordance with the TR 4052.

This standard specifies the characteristics of threaded welded straight unions for pipe couplings, 60°, spherical, in TI-P64001, for aerospace applications.
NOTE  Assembly in accordance with TR 4052.

This standard specifies a method of determining the behaviour of a finished cable after ageing in the absence of air.
It shall be used together with EN 3475-100.

This standard specifies the characteristics of unions, bulkhead, long, welded end for pipe couplings 8°30', in titanium alloy,  for aerospace applications.
Nominal pressure: up to 28 000 kPa
Temperature range: - 55 C to  + 135  C

This standard specifies a method of evaluating the operational mechanical endurance of optical connection elements with optical contacts.
It shall be used together with EN 2591-100.

TC - Minor editorial modifications

This standard specifies a method of assessing the effects of a controlled salt laden atmosphere on optical connection elements (including permanent connections) and fibre optic couplers.
It shall be used together with EN 2591-100.

TC - Modification in Table 1 and footnote on page 3 of the English version

This standard specifies a method for assessing the plating porosity of contacts.
It shall be used together with EN 2591-100.

This standard specifies a method of assessing the ability of a mated pair of optical connection elements (including permanent connections) and fibre optic couplers to withstand axial loads without mechanical or optical damage.
It shall be used together with EN 2591-100.

This standard specifies a method of determining the tensile strength of crimped connections used in elements of electrical and optical connection.
It shall be used together with EN 2591-100.

This standard specifies the characteristics of elbows 90°, bulkhead, welded end, long, for pipe couplings 8°30', in titanium
alloy, for aerospace applications.
Nominal pressure: up to 28 000 kPa
Temperature range:   55 °C to 135 °C

This standard specifies the general tolerances of:
Extruded section
in aluminium alloys
for aerospace applications.
It applies:
-   to sections, standardized or defined by a drawing, the cross section of which, regular or irregular, can be inscribed in a circle of 250  mm

This standard specifies the characteristics for T-ring fillers in titanium alloy for welding pipes, for aerospace applications.
Nominal pressure: up to 28 000 kPa

This standard specifies a method for checking the voltage strength of insulated terminal lugs and in-line splices.
It shall be used together with EN 2591-100.

This standard specifies a method for determining the ability of an optical fibre or fibre optic cable to withstand microbending.
It shall be used together with EN 3745-100.

This standard specifies the characteristics of welded ferrules with dynamic beam seal end for pipe couplings 8°30', in titanium alloy, for aerospace applications.
Nominal pressure: up to 28 000 kPa
Temperature range: - 55 °C to 135 °C

TC - Minor editorial modifications

This standard specifies a method of checking the sealing of optical connection elements (including permanent connections) and fibre optic couplers exposed to low pressure.
It shall be used together with EN 2591-100.

This standard specifies the characteristics of tees, reduced, for pipe couplings 8 30', in titanium alloy, for aerospace
applications.
Nominal pressure: up to 28 000 kPa
Temperature range:   55  C to 135  C

This standard specifies a method of checking the tensile strength of couplers in conditions of mechanical and thermal stress.
It shall be used together with EN 2591-100.

This standard specifies a method of checking the ability of optical connection elements (including permanent connections) and fibre optic to withstand damp heat.
It shall be used together with EN 2591-100.

This standard specifies a method of evaluating an insulation resistance to propagation of surface notch.
It shall be used together with EN 3475-100.

TC - Minor editorial modifications

This standard specifies the characteristics of welded ferrules for inch series pipe couplings, 37°, in heat resisting steel, for aerospace applications.
Nominal pressure: Class D in accordance with ISO 6771

This standard specifies a procedure for testing the tensile strength and elongation of extruded insulation, sheath and jacket material.
It shall be used together with EN 3475-100.

This standard specifies the characteristics of bulkhead nuts for pipe couplings, in titanium alloy, for aerospace applications.

This standard specifies a method of measuring the mechanical strippability of an optical fibre or cable.

This standard specifies a method of checking the effectiveness of cable attachment in the axial compression mode for optical connection elements (including permanent connections) and fibre optic couplers.
It shall be used together with EN 2591-100.

This standard specifies the characteristics of straight unions for inch series pipe couplings, 37°, spherical, in heat resisting steel, for aerospace applications.
Connect with fluid system component with port connection in accordance with prEN 4550-3.
Nominal pressure : Class D in accordance with ISO 6771

This standard specifies the characteristics of spring tension clips for the support of electrical harnesses, in FE-PA3903 for aerospace applications.
Maximum operating temperature: 250 °C

This standard specifies a procedure for measuring cable-to-cable abrasion resistance.
It shall be used together with EN 3475-100.

This standard specifies the characteristics of welded elbows 90° for inch series pipe couplings, in heat resisting steel, for aerospace applications.
Nominal pressure: Class D per ISO 6771

This standard specifies a method of assessing the robustness of the attachment of protective covers used in elements of electrical and optical connection.
It shall be used together with EN 2591-100.

This standard specifies the characteristics, qualification and acceptance requirements for spring tension clips for the support of electrical harnesses, in alloy steel for aerospace applications.
It is applicable whenever referenced.

This standard specifies a method of verifying solderability of contacts with self-contained solder and flux, which are not accessible to a solder iron.