iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 62092:2002

(Main)

Ultrasonics - Hydrophones - Characteristics and calibration in the frequency range from 15 MHz to 40 MHz

Ultrasonics - Hydrophones - Characteristics and calibration in the frequency range from 15 MHz to 40 MHz

Applies to - hydrophones employing piezoelectric sensor elements, designed to measure the pulsed and continuous-wave ultrasonic fields generated by ultrasonic equipment; - hydrophones used for measurements made in water and in the frequency range between 15 MHz and 40 MHz; - hydrophones with or without an integral amplifier; - hydrophones with a circular piezoelectrically active element. Specifies - relevant hydrophone characteristics; - methods of determining directional response and hydrophone sensitivity based on relative or comparative measurements; and describes - absolute hydrophone calibration methods. Recommendations and references to accepted literature are made for the various relative and absolute calibration methods in the frequency range covered by this International Standard.

Ultraschall - Hydrophone - Eigenschaften und Kalibrierung im Frequenzbereich von 15 MHz bis 40 MHz

Ultrasons - Hydrophones - Caractéristiques et étalonnage dans la gamme de fréquences de 15 MHz à 40 MHz

Ultrasonics - Hydrophones - Characteristics and calibration in the frequency range from 15 MHz to 40 MHz (IEC 62092:2001)

General Information

Status
Withdrawn
Publication Date
31-Aug-2002
Withdrawal Date
28-Oct-2007
ICS
11.040.55 - Diagnostic equipment
17.140.50 - Electroacoustics
Technical Committee
I11 - Imaginarni 11
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
26-Oct-2007
Due Date
18-Nov-2007
Completion Date
29-Oct-2007
Ref Project
EN 62092:2001 - Ultrasonics - Hydrophones - Characteristics and calibration in the frequency range from 15 MHz to 40 MHz

Relations

Replaced By
SIST EN 62127-2:2008 - Ultrasonics - Hydrophones -- Part 2: Calibration for ultrasonic fields up to 40 MHz
Effective Date
28-Jan-2023
Revised
SIST EN 62127-3:2008 - Ultrasonics - Hydrophones -- Part 3: Properties of hydrophones for ultrasonic fields up to 40 MHz
Effective Date
07-Sep-2010
Revised
SIST EN 62127-2:2008 - Ultrasonics - Hydrophones -- Part 2: Calibration for ultrasonic fields up to 40 MHz
Effective Date
07-Sep-2010
Replaced By
SIST EN 62127-1:2008 - Ultrasonics - Hydrophones -- Part 1: Measurement and characterization of medical ultrasonic fields up to 40 MHz
Effective Date
28-Jan-2023
Revises
SIST EN 62127-1:2008 - Ultrasonics - Hydrophones -- Part 1: Measurement and characterization of medical ultrasonic fields up to 40 MHz
Effective Date
07-Jun-2022
Revises
SIST EN 62127-3:2008 - Ultrasonics - Hydrophones -- Part 3: Properties of hydrophones for ultrasonic fields up to 40 MHz
Effective Date
07-Jun-2022
Revises
SIST EN 62127-2:2008 - Ultrasonics - Hydrophones -- Part 2: Calibration for ultrasonic fields up to 40 MHz
Effective Date
07-Jun-2022
Replaced By
SIST EN 62127-3:2008 - Ultrasonics - Hydrophones -- Part 3: Properties of hydrophones for ultrasonic fields up to 40 MHz
Effective Date
01-Jan-2008
Replaced By
SIST EN 62127-2:2008 - Ultrasonics - Hydrophones -- Part 2: Calibration for ultrasonic fields up to 40 MHz
Effective Date
01-Jan-2008
Replaced By
SIST EN 62127-1:2008 - Ultrasonics - Hydrophones -- Part 1: Measurement and characterization of medical ultrasonic fields up to 40 MHz
Effective Date
01-Jan-2008

Buy Standard

EN 62092:2002EN 62092:2002
PreviousNext
Standard
EN 62092:2002
English language
55 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62092:2002
01-september-2002
Ultrasonics - Hydrophones - Characteristics and calibration in the frequency range
from 15 MHz to 40 MHz (IEC 62092:2001)
Ultrasonics - Hydrophones - Characteristics and calibration in the frequency range from
15 MHz to 40 MHz
Ultraschall - Hydrophone - Eigenschaften und Kalibrierung im Frequenzbereich von 15
MHz bis 40 MHz
Ultrasons - Hydrophones - Caractristiques et talonnage dans la gamme de frquences de
15 MHz 40 MHz
Ta slovenski standard je istoveten z: EN 62092:2001
ICS:
11.040.55 'LDJQRVWLþQDRSUHPD Diagnostic equipment
17.140.50 Elektroakustika Electroacoustics
SIST EN 62092:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 62092
NORME EUROPÉENNE
EUROPÄISCHE NORM October 2001
ICS 17.140.50
English version
Ultrasonics - Hydrophones -
Characteristics and calibration in
the frequency range from 15 MHz to 40 MHz
(IEC 62092:2001)
Ultrasons - Hydrophones - Ultraschall - Hydrophone -
Caractéristiques et étalonnage Eigenschaften und Kalibrierung
dans la gamme de fréquences im Frequenzbereich von
de 15 MHz à 40 MHz 15 MHz bis 40 MHz
(CEI 62092:2001) (IEC 62092:2001)
This European Standard was approved by CENELEC on 2001-10-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,
Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 61828:2021(Main)
Ultrasonics - Transducers - Definitions and measurement methods regarding focusing for the transmitted fields (IEC 61828:2020)
EN IEC 61828:2021

IEC 61828:2020
- provides definitions for the transmitted field characteristics of focusing and nonfocusing transducers for applications in medical ultrasound;
- relates these definitions to theoretical descriptions, design, and measurement of the transmitted fields of focusing transducers;
- gives measurement methods for obtaining defined field characteristics of focusing and nonfocusing transducers;
- specifies beam axis alignment methods appropriate for focusing and nonfocusing transducers.
IEC 61828:2021 relates to focusing ultrasonic transducers operating in the frequency range appropriate to medical ultrasound (0,5 MHz to 40 MHz) for both therapeutic and diagnostic applications. It shows how the characteristics of the transmitted field of transducers can be described from the point of view of design, as well as measured by someone with no prior knowledge of the construction details of a particular device. The transmitted ultrasound field for a specified excitation is measured by a hydrophone in either a standard test medium (for example, water) or in a given medium. This document applies only to media where the field behaviour is essentially like that in a fluid (i.e. where the influence of shear waves and elastic anisotropy is small), including soft tissues and tissue-mimicking gels. Any aspects of the field that affect their theoretical description or are important in design are also included. These definitions would have use in scientific communications, system design and description of the performance and safety of systems using these devices.
IEC 61828:2021 incorporates definitions from other related standards where possible, and supplies more specific terminology, both for defining focusing characteristics and for providing a basis for measurement of these characteristics.
IEC 61828:2021 cancels and replaces the first edition published in 2001. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) Clause 6 on Measurement procedures has been replaced by Clause 6: "Acoustic field measurement: equipment" and Clause 7: "Measurement procedure" and related definitions.
b) Reorganization of definitions and measurement section to accommodate specific sets of measurements for focusing, nonlinearity, beam axis alignment, beam area, beam maximum, numerical projection, plane wave, high intensity therapeutic ultrasound, multiple sources, spatial impulse response and compound plane waves. Clause 3 has been moved to Annex B.
c) The normative references have been updated and the Bibliography has been expanded from 8 to 40 references.
d) Twelve figures have been updated and seven new figures (B.1, B.3, B.7, B.10, B.11, B.12, B.13, B.14) have been added to facilitate measurements and be consistent with measurement terminology.
e) New measurements have been added for time delays, arrays, plane waves and spatial impulse response.
f) Annex A has been expanded to provide general guidance on pulsed waves, system responses, focusing gains and minimum beamwidth estimation.
g) New annexes have been added:

• Annex B (informative) Rationale for focusing and nonfocusing definitions

• Annex E (informative) Uncertainties;

• Annex F (informative) Transducer and hydrophone positioning systems;

•
  • Standard
    115 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61157:2008/A1:2014(Amendment)
Standard means for the reporting of the acoustic output of medical diagnostic ultrasonic equipment
EN 61157:2007/A1:2013

This International Standard is applicable to medical diagnostic ultrasonic equipment.
– It provides a set of traceable acoustic parameters describing the acoustic fields.
– It defines a standard means and format for the reporting of the acoustic output information.
– It also describes a reduced dataset recommended for equipment generating low acoustic output levels.
NOTE The information tabulated in this standard format can be used for
a) exposure planning for biological effects studies;
b) exposure data for prospective epidemiological studies conducted using exposure conditions similar to those reported in this standard. In the absence of actual exposure data for retrospective epidemiological studies, the information tabulated in this standard format might also be used with
cautionary comment.

  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61157:2008(Main)
Standard means for the reporting of the acoustic output of medical diagnostic ultrasonic equipment
EN 61157:2007

This International Standard is applicable to medical diagnostic ultrasonic equipment.
– It provides a set of traceable acoustic parameters describing the acoustic fields.
– It defines a standard means and format for the reporting of the acoustic output information.
– It also describes a reduced dataset recommended for equipment generating low acoustic output levels.
NOTE The information tabulated in this standard format can be used for
a) exposure planning for biological effects studies;
b) exposure data for prospective epidemiological studies conducted using exposure conditions similar to those reported in this standard. In the absence of actual exposure data for retrospective epidemiological studies, the information tabulated in this standard format might also be used with
cautionary comment.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61828:2002(Main)
Ultrasonics - Focusing transducers - Definitions and measurement methods for the transmitted fields
EN 61828:2001

Provides definitions for the transmitted field characteristics of focusing transducers for applications in medical ultrasound; relates these definitions to theoretical descriptions, design, and measurement of the transmitted fields of focusing transducers. Gives measurement methods for obtaining defined characteristics of focusing transducers. Specifies beam axis alignment methods appropriate for focusing transducers.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61828:2021(Main)
Ultrasonics - Transducers - Definitions and measurement methods regarding focusing for the transmitted fields (IEC 61828:2020)
EN IEC 61828:2021

IEC 61828:2020
- provides definitions for the transmitted field characteristics of focusing and nonfocusing transducers for applications in medical ultrasound;
- relates these definitions to theoretical descriptions, design, and measurement of the transmitted fields of focusing transducers;
- gives measurement methods for obtaining defined field characteristics of focusing and nonfocusing transducers;
- specifies beam axis alignment methods appropriate for focusing and nonfocusing transducers.
IEC 61828:2021 relates to focusing ultrasonic transducers operating in the frequency range appropriate to medical ultrasound (0,5 MHz to 40 MHz) for both therapeutic and diagnostic applications. It shows how the characteristics of the transmitted field of transducers can be described from the point of view of design, as well as measured by someone with no prior knowledge of the construction details of a particular device. The transmitted ultrasound field for a specified excitation is measured by a hydrophone in either a standard test medium (for example, water) or in a given medium. This document applies only to media where the field behaviour is essentially like that in a fluid (i.e. where the influence of shear waves and elastic anisotropy is small), including soft tissues and tissue-mimicking gels. Any aspects of the field that affect their theoretical description or are important in design are also included. These definitions would have use in scientific communications, system design and description of the performance and safety of systems using these devices.
IEC 61828:2021 incorporates definitions from other related standards where possible, and supplies more specific terminology, both for defining focusing characteristics and for providing a basis for measurement of these characteristics.
IEC 61828:2021 cancels and replaces the first edition published in 2001. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) Clause 6 on Measurement procedures has been replaced by Clause 6: "Acoustic field measurement: equipment" and Clause 7: "Measurement procedure" and related definitions.
b) Reorganization of definitions and measurement section to accommodate specific sets of measurements for focusing, nonlinearity, beam axis alignment, beam area, beam maximum, numerical projection, plane wave, high intensity therapeutic ultrasound, multiple sources, spatial impulse response and compound plane waves. Clause 3 has been moved to Annex B.
c) The normative references have been updated and the Bibliography has been expanded from 8 to 40 references.
d) Twelve figures have been updated and seven new figures (B.1, B.3, B.7, B.10, B.11, B.12, B.13, B.14) have been added to facilitate measurements and be consistent with measurement terminology.
e) New measurements have been added for time delays, arrays, plane waves and spatial impulse response.
f) Annex A has been expanded to provide general guidance on pulsed waves, system responses, focusing gains and minimum beamwidth estimation.
g) New annexes have been added:

• Annex B (informative) Rationale for focusing and nonfocusing definitions

• Annex E (informative) Uncertainties;

• Annex F (informative) Transducer and hydrophone positioning systems;

•
  • Standard
    115 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61157:2008/A1:2014(Amendment)
Standard means for the reporting of the acoustic output of medical diagnostic ultrasonic equipment
EN 61157:2007/A1:2013

This International Standard is applicable to medical diagnostic ultrasonic equipment.
– It provides a set of traceable acoustic parameters describing the acoustic fields.
– It defines a standard means and format for the reporting of the acoustic output information.
– It also describes a reduced dataset recommended for equipment generating low acoustic output levels.
NOTE The information tabulated in this standard format can be used for
a) exposure planning for biological effects studies;
b) exposure data for prospective epidemiological studies conducted using exposure conditions similar to those reported in this standard. In the absence of actual exposure data for retrospective epidemiological studies, the information tabulated in this standard format might also be used with
cautionary comment.

  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60601-2-37:2008/A11:2012(Amendment)
Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment
EN 60601-2-37:2008/A11:2011

This International Standard applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of ULTRASONIC DIAGNOSTIC EQUIPMENT as defined in 201.3.217, hereinafter referred to as ME EQUIPMENT. If a clause or subclause is specifically intended to be applicable to ME EQUIPMENT only, or to ME SYSTEMS only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME EQUIPMENT and to ME SYSTEMS, as relevant. HAZARDS inherent in the intended physiological function of ME EQUIPMENT or ME SYSTEMS within the scope of this standard are not covered by specific requirements in this standard except in 7.2.13 and 8.4.1 of this standard.

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60601-2-37:2008(Main)
Medical electrical equipment -- Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment
EN 60601-2-37:2008

This International Standard applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of ULTRASONIC DIAGNOSTIC EQUIPMENT as defined in 201.3.217, hereinafter referred to as ME EQUIPMENT. If a clause or subclause is specifically intended to be applicable to ME EQUIPMENT only, or to ME SYSTEMS only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME EQUIPMENT and to ME SYSTEMS, as relevant. HAZARDS inherent in the intended physiological function of ME EQUIPMENT or ME SYSTEMS within the scope of this standard are not covered by specific requirements in this standard except in 7.2.13 and 8.4.1 of this standard.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61157:2008(Main)
Standard means for the reporting of the acoustic output of medical diagnostic ultrasonic equipment
EN 61157:2007

This International Standard is applicable to medical diagnostic ultrasonic equipment.
– It provides a set of traceable acoustic parameters describing the acoustic fields.
– It defines a standard means and format for the reporting of the acoustic output information.
– It also describes a reduced dataset recommended for equipment generating low acoustic output levels.
NOTE The information tabulated in this standard format can be used for
a) exposure planning for biological effects studies;
b) exposure data for prospective epidemiological studies conducted using exposure conditions similar to those reported in this standard. In the absence of actual exposure data for retrospective epidemiological studies, the information tabulated in this standard format might also be used with
cautionary comment.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61828:2002(Main)
Ultrasonics - Focusing transducers - Definitions and measurement methods for the transmitted fields
EN 61828:2001

Provides definitions for the transmitted field characteristics of focusing transducers for applications in medical ultrasound; relates these definitions to theoretical descriptions, design, and measurement of the transmitted fields of focusing transducers. Gives measurement methods for obtaining defined characteristics of focusing transducers. Specifies beam axis alignment methods appropriate for focusing transducers.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day