iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 300 394-4-6 V1.1.1:2003

(Main)

Terrestrial Trunked Radio (TETRA); Conformance testing specification; Part 4: Protocol testing specification for Direct Mode Operation (DMO); Sub-part 6: Abstract Test Suite (ATS) for Direct Mode Repeater (DM-REP) type 1

Terrestrial Trunked Radio (TETRA); Conformance testing specification; Part 4: Protocol testing specification for Direct Mode Operation (DMO); Sub-part 6: Abstract Test Suite (ATS) for Direct Mode Repeater (DM-REP) type 1

Protocol conformance testing (TTCN) for mobile stations to be used for Direct Mode operation

Prizemni snopovni radio (TETRA) - Specifikacija za preskušanje skladnosti - 4. del: Specifikacija za preskušanje protokola za neposredno obratovanje (DMO) ¬- 6. poddel: Abstraktni preskušalni niz (ATS) za neposredni ponavljalnik (repetitor) (DM-REP) tipa 1

General Information

Status
Published
Publication Date
30-Nov-2003
ICS
33.070.10 - Terrestrial Trunked Radio (TETRA)
Technical Committee
SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Dec-2003
Due Date
01-Dec-2003
Completion Date
01-Dec-2003
Mandate
BC-T-344
Ref Project
ETSI EN 300 394-4-6 V1.1.1 (2001-01) - Terrestrial Trunked Radio (TETRA); Conformance testing specification; Part 4: Protocol testing specification for Direct Mode Operation (DMO); Sub-part 6: Abstract Test Suite (ATS) for Direct Mode Repeater (DM-REP) type 1

Buy Standard

EN 300 394-4-6 V1.1.1:2003EN 300 394-4-6 V1.1.1:2003
PreviousNext
Standard
EN 300 394-4-6 V1.1.1:2003
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Prizemni snopovni radio (TETRA) - Specifikacija za preskušanje skladnosti - 4. del: Specifikacija za preskušanje protokola za neposredno obratovanje (DMO) ¬- 6. poddel: Abstraktni preskušalni niz (ATS) za neposredni ponavljalnik (repetitor) (DM-REP) tipa 1Terrestrial Trunked Radio (TETRA); Conformance testing specification; Part 4: Protocol testing specification for Direct Mode Operation (DMO); Sub-part 6: Abstract Test Suite (ATS) for Direct Mode Repeater (DM-REP) type 133.070.10Prizemni snopovni radio (TETRA)Terrestrial Trunked Radio (TETRA)ICS:Ta slovenski standard je istoveten z:EN 300 394-4-6 Version 1.1.1SIST EN 300 394-4-6 V1.1.1:2003en01-december-2003SIST EN 300 394-4-6 V1.1.1:2003SLOVENSKI
STANDARD



SIST EN 300 394-4-6 V1.1.1:2003



ETSIEN300394-4-6V1.1.1(2001-01)EuropeanStandard(Telecommunicationsseries)TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part4:ProtocoltestingspecificationforDirectModeOperation(DMO);Sub-part6:AbstractTestSuite(ATS)forDirectModeRepeater(DM-REP)type1SIST EN 300 394-4-6 V1.1.1:2003



ETSIETSIEN300394-4-6V1.1.1(2001-01)2ReferenceDEN/TETRA-02009-4-6KeywordsTETRA,DMO,protocol,testing,TTCN,ATS,radioETSI650RoutedesLuciolesF-06921SophiaAntipolisCedex-FRANCETel.:+33492944200Fax:+33493654716SiretN°34862356200017-NAF742CAssociationàbutnonlucratifenregistréeàlaSous-PréfecturedeGrasse(06)N°7803/88ImportantnoticeIndividualcopiesofthepresentdocumentcanbedownloadedfrom:http://www.etsi.orgThepresentdocumentmaybemadeavailableinmorethanoneelectronicversionorinprint.Inanycaseofexistingorperceiveddifferenceincontentsbetweensuchversions,thereferenceversionisthePortableDocumentFormat(PDF).Incaseofdispute,thereferenceshallbetheprintingonETSIprintersofthePDFversionkeptonaspecificnetworkdrivewithinETSISecretariat.Usersofthepresentdocumentshouldbeawarethatthedocumentmaybesubjecttorevisionorchangeofstatus.InformationonthecurrentstatusofthisandotherETSIdocumentsisavailableathttp://www.etsi.org/tb/status/Ifyoufinderrorsinthepresentdocument,sendyourcommentto:editor@etsi.frCopyrightNotificationNopartmaybereproducedexceptasauthorizedbywrittenpermission.Thecopyrightandtheforegoingrestrictionextendtoreproductioninallmedia.©EuropeanTelecommunicationsStandardsInstitute2001.Allrightsreserved.SIST EN 300 394-4-6 V1.1.1:2003



ETSIETSIEN300394-4-6V1.1.1(2001-01)3ContentsIntellectualPropertyRights.5Foreword.51Scope.62References.63Definitionsandabbreviations.73.1TETRAdefinitions.73.2TETRAabbreviations.73.3ISO9646definitions.73.4ISO9646abbreviations.74AbstractTestMethod(ATM).84.1SinglePCOtesting.84.1.1LowerTester(LT).84.1.2UpperTester(UT).84.1.3TestCoordinationProcedures(TCP).84.1.4PointofControlandObservation(PCO).94.2MultiplePCOtesting.94.2.1LowerTesters(LT).94.2.2UpperTester(UT).94.2.3TestCoordinationProcedures(TCP).94.2.4PointofControlandObservation(PCO).94.3TestconfigurationsanduseofconcurrentTTCN.105ATSconventions.115.1Namingconventions.115.1.1Declarationspart.115.1.1.1Testsuitetypeandstructuredtypedefinitions.115.1.1.2Testsuiteoperationsdefinitions.115.1.1.3Testsuiteparameterdeclarations.115.1.1.4Testcaseselectionexpressiondefinitions.115.1.1.5Testsuiteconstantdeclarations.125.1.1.6Testsuitevariabledeclarations.125.1.1.7Testcasevariabledeclarations.125.1.1.8PCOdeclarations.125.1.1.9Timerdeclarations.125.1.1.10ASPtypedefinitions.135.1.1.11PDUtypedefinitions.135.1.1.12Aliasdefinitions.135.1.2Constraintspart.135.1.3Dynamicpart.145.1.3.1Testcaseidentifier.145.1.3.2Teststepidentifier.145.1.3.3Defaultidentifier.145.2Implementationconventions.145.3TCandTPnaming.14SIST EN 300 394-4-6 V1.1.1:2003



ETSIETSIEN300394-4-6V1.1.1(2001-01)4AnnexA(normative):ATSforDMORepeatertype1(DM-REP1)MAClayer.15A.1TheTTCNGraphicalform(TTCN.GR).15A.2TheTTCNMachineProcessableform(TTCN.MP).15AnnexB(normative):PartialPIXITproformaforTETRADMORepeatertype1MAClayerprotocol.16B.1Identificationsummary.16B.2ATSsummary.16B.3Testlaboratory.16B.4Clientidentification.16B.5SUT.17B.6Protocollayerinformation.17B.6.1Protocolidentification.17B.6.2IUTinformation.17B.6.2.1Implicitsendevents.17B.6.2.2Parametervalues.17AnnexC(normative):ProtocolConformanceTestReport(PCTR)proformaforTETRADMORepeatertype1MAClayerprotocol.18C.1Identificationsummary.18C.1.1Protocolconformancetestreport.18C.1.2IUTidentification.18C.1.3Testingenvironment.18C.1.4Limitsandreservation.19C.1.5Comments.19C.2IUTconformancestatus.19C.3Staticconformancesummary.19C.4Dynamicconformancesummary.19C.5Staticconformancereviewreport.20C.6Testcampaignreport.20C.7Observations.21History.22SIST EN 300 394-4-6 V1.1.1:2003



ETSIETSIEN300394-4-6V1.1.1(2001-01)5IntellectualPropertyRightsIPRsessentialorpotentiallyessentialtothepresentdocumentmayhavebeendeclaredtoETSI.TheinformationpertainingtotheseessentialIPRs,ifany,ispubliclyavailableforETSImembersandnon-members,andcanbefoundinETSISR000314:"IntellectualPropertyRights(IPRs);Essential,orpotentiallyEssential,IPRsnotifiedtoETSIinrespectofETSIstandards",whichisavailablefromtheETSISecretariat.LatestupdatesareavailableontheETSIWebserver(http://www.etsi.org/ipr).PursuanttotheETSIIPRPolicy,noinvestigation,includingIPRsearches,hasbeencarriedoutbyETSI.NoguaranteecanbegivenastotheexistenceofotherIPRsnotreferencedinETSISR000314(ortheupdatesontheETSIWebserver)whichare,ormaybe,ormaybecome,essentialtothepresentdocument.ForewordThisEuropeanStandard(Telecommunicationsseries)hasbeenproducedbyETSIProjectTerrestrialTrunkedRadio(TETRA).ThepresentdocumenthadbeensubmittedtoPublicEnquiryasETS300394-4-6.DuringtheprocessingforVoteitwasconvertedintoanEN.Thepresentdocumentconsistsofthefollowingparts:Part1:"Radio";Part2:"ProtocoltestingspecificationforVoiceplusData(V+D)";Part4:"ProtocoltestingspecificationforDirectModeOperation(DMO)";Part5:"Security".NationaltranspositiondatesDateofadoptionofthisEN:5January2001DateoflatestannouncementofthisEN(doa):30April2001DateoflatestpublicationofnewNationalStandardorendorsementofthisEN(dop/e):31October2001DateofwithdrawalofanyconflictingNationalStandard(dow):31October2001SIST EN 300 394-4-6 V1.1.1:2003



ETSIETSIEN300394-4-6V1.1.1(2001-01)61ScopeThepresentdocumentcontainstheAbstractTestSuite(ATS)totesttheTETRADirectModeOperation(DMO)Repeatertype1(DM-REP1)protocolatlayer2,theMediumAccessControl(MAC)protocol.TheMACprotocolisspecifiedinETS300396-3[1]andinEN300396-4[2].TheTestSuiteStructure(TSS)andTestPurposes(TPs)forthisATSaredefinedinEN300394-4-4[4].TheobjectiveofthistestspecificationistoprovideabasisforapprovaltestsforTETRAequipmentgivingahighprobabilityofairinterfaceinter-operabilitybetweendifferentmanufacturer'sTETRAequipment.TheISOstandardforthemethodologyofconformancetesting,ISO/IEC9646-1[5],ISO/IEC9646-2[6],ISO/IEC9646-3[7]andISO/IEC9646-5[8],aswellastheETSIrulesforconformancetesting,ETS300406[9]andETR141[10]areusedasabasisforthetestmethodology.AnnexAprovidestheTreeandTabularCombinedNotation(TTCN)partofthisATS.AnnexBprovidesthepartialProtocolImplementationeXtraInformationforTesting(PIXIT)ProformaofthisATS.AnnexCprovidestheProtocolConformanceTestReport(PCTR)ProformaofthisATS.2ReferencesThefollowingdocumentscontainprovisionswhich,throughreferenceinthistext,constituteprovisionsofthepresentdocument.• Referencesareeitherspecific(identifiedbydateofpublication,editionnumber,versionnumber,etc.)ornon-specific.• Foraspecificreference,subsequentrevisionsdonotapply.• Foranon-specificreference,thelatestversionapplies.[1]ETSIETS300396-3:"TerrestrialTrunkedRadio(TETRA);TechnicalrequirementsforDirectModeOperation(DMO);Part3:MobileStationtoMobileStation(MS-MS)AirInterface(AI)protocol".[2]ETSIEN300396-4:"RadioEquipmentandSystems(RES);Trans-EuropeanTrunkedRadio(TETRA);DirectMode(DM);Part4:Type1RepeaterAirInterface".[3]ETSIEN300396-8-2:"RadioEquipmentandSystems(RES);Trans-EuropeanTrunkedRAdio(TETRA);DirectModeOperation(DMO);Part8:ProtocolImplementationConformanceStatement(PICS)proformaspecification;Part8-2:Type1repeaterAirInterface".[4]ETSIEN300394-4-4:"RadioEquipmentandSystems(RES);Trans-EuropeanTrunkedRAdio(TETRA)system;DirectModeOperation(DMO);Part4:Protocoltestingspecification;TestSuiteStructureandTestPurposes;Part4-4Repeatertype1(DMREP1)AirInterface(AI)".[5]ISO/IEC9646-1(1994):"Informationtechnology-OpenSystemsInterconnection-ConformanceTestingMethodologyandFramework-Part1:GeneralConcepts".(SeealsoITU-TRecommendationX.290(1991)).[6]ISO/IEC9646-2(1994):"Informationtechnology-OpenSystemsInterconnection-ConformanceTestingMethodologyandFramework-Part2:AbstractTestSuiteSpecification".(SeealsoITU-TRecommendationX.291(1991)).[7]ISO/IEC9646-3(1994):"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part3:Thetreeandtabularcombinednotation".(SeealsoITU-TRecommendationX.292(1992)).SIST EN 300 394-4-6 V1.1.1:2003



ETSIETSIEN300394-4-6V1.1.1(2001-01)7[8]ISO/IEC9646-5(1994):"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part5:Requirementsontestlaboratoriesandclientsfortheconformanceassessmentprocess".(SeealsoITU-TRecommendationX.292(1992)).[9]ETSIETS300406:"MethodsforTestingandSpecification(MTS);Protocolandprofileconformancetestingspecifications;Standardizationmethodology".[10]ETSIETR141:"MethodsforTestingandSpecification(MTS);Protocolandprofileconformancetestingspecifications;TheTreeandTabularCombinedNotation(TTCN)styleguide".3Definitionsandabbreviations3.1TETRAdefinitionsForthepurposesofthepresentdocument,thetermsanddefinitionsgiveninEN300396-4[2]apply.3.2TETRAabbreviationsForthepurposesofthepresentdocumentthefollowingTETRAabbreviationsapply:DM-REP1DirectModeRepeaterType1MACMediumAccessControlMSMobileStationSDSShortDataServiceSDUServiceDataUnit3.3ISO9646definitionsForthepurposesofthepresentdocumentthefollowingISO/IEC9646definitionsapply:TTCN.GRTTCN.MPPCTRProtocolConformanceTestReport(PCTRproforma)3.4ISO9646abbreviationsForthepurposesofthepresentdocumentthefollowingISO/IEC9646-1[5]abbreviationsapply:ASPAbstractServicePrimitiveATMAbstractTestMethodATSAbstractTestSuiteICSImplementationConformanceStatementIUTImplementationUnderTestIXITImplementationeXtraInformationforTestingLTLowerTesterPCOPointofControlandObservationPCTRProtocolConformanceTestReportPDUProtocolDataUnitPICSProtocolImplementationConformanceStatementsPIXITProtocolImplementationeXtraInformationforTestingSAPServiceAccessPointSPyTSinglePartyTestingSUTSystemUnderTestTCTestCaseTPTestPurposeTSSTestSuiteStructureTTCNTreeandTabularCombinedNotationSIST EN 300 394-4-6 V1.1.1:2003



ETSIETSIEN300394-4-6V1.1.1(2001-01)8UTUpperTester4AbstractTestMethod(ATM)ThisclausedescribestheATMusedfortestingtheDM-REP1MAClayerprotocol.Theselectedmethodistheremotemethod,asdefinedinISO/IEC9646-2[6],clause11.Thistestmethodhasbeenselected,because:-thistestmethodimpliesnospecificrequirementsfromtheImplementationUnderTest(IUT);-theupperServiceAccessPoint(SAP)oftheIUTcannotbedirectlyobserved;-thevarietyofthepossibleTETRAimplementationsisaserioustechnicalobstaclefortheadoptionofadifferentATM;-thistestmethodplacesminimumlimitationsintherealizationofconformancetesting.TheDM-REP1MACprotocoldefinestheoperationofaDM-REP1servingtwoairinterfaces,themasterandtheslavelink.Totesttherepeateroperationinsomecasesbothinterfacesneedtobecontrolledandobservedsimultaneously.Thisimpliesthattwotestingmethodsareused:theremotesingle-partytestmethod(withonePCO)andtheremotemultipartytestmethodwithtwoPCOs.4.1SinglePCOtestingTheremoteSinglePartytestmethodwithasinglePCOisillustratedinfigure1.TestsystemSUTUpperlayersIUTTETRAphysicallayerandradiocommunicationMAC-PDUsUTPCOASPsTCPLTDM-REPMACFigure1:RemoteSPyTtestmethodforTETRADM-REP1MAClayer4.1.1LowerTester(LT)ALTislocatedinaremoteTETRAtestsystem.ItcontrolsandobservesthebehaviouroftheIUT.4.1.2UpperTester(UT)ThereisnoexplicitUTintheremotetestmethod,buttheDM-REP1MAClayerandthelayersaboveinsidetheSystemUnderTest(SUT)areusedimplicitlyfortestingtheMAClayer.4.1.3TestCoordinationProcedures(TCP)TheimplicitsendeventsdefinedbytheproviderofanimplementationinannexBservethepurposeoftheTCP.TheyareusedasaninputtotheIUTcommunicatingwiththeUTtoinitiatetesteventsattheDMOMAClayer.SIST EN 300 394-4-6 V1.1.1:2003



ETSIETSIEN300394-4-6V1.1.1(2001-01)94.1.4PointofControlandObservation(PCO)AlltesteventsatthePCOcarryingserviceuserdataarespecifiedintermsofMAClayerPDUs.OnlyfewAbstractServicePrimitives(ASPs)aredefinedforcontrolorobservationpurposes.ThemappingoftheMACPDUsintothephysicallayerframestructureislefttothetestimplementatio
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 301 040 V2.1.1:2006(Main)
Terrestrial Trunked Radio (TETRA); Security; Lawful Interception (LI) interface
ETSI EN 301 040 V2.1.1 (2006-03)

The present document describes the data content of a Lawful Interception interface in a TETRA system. It provides the requirements and specification of the interface within a TETRA system for the purpose of providing data to Law Enforcement Agencies (LEAs) in the area of Lawful Interception (LI) of communications. The present document describes the internal LI interface of a TETRA network, and does not specify the means by which data is delivered to the LEA or to its designated Law Enforcement Monitoring Facility (LEMF). However the internal LI interface is defined in such a way that data may be carried transparently on most networks.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 394-1 V2.4.1:2006(Main)
Terrestrial Trunked Radio (TETRA); Conformance testing specification; Part 1: Radio
ETSI EN 300 394-1 V2.4.1 (2006-02)

The present document specifies the minimum technical characteristics of TETRA Voice plus Data (V+D) Base Stations (BS) and Mobile Station (MS) equipment, and TETRA Direct Mode Operation (DMO) equipment, and the radio test methods used for type testing. Specific test methods for DMO equipment are defined in annex F of the present document. The purpose of these specifications is to provide a sufficient quality of radio transmission and reception for equipment operating in a TETRA system and to minimize harmful interference to other equipment. The present document is applicable to TETRA systems operating at radio frequencies in the range of 300 MHz to 1 GHz.

  • Standard
    114 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 392-12-6 V1.3.1:2006(Main)
Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 12: Supplementary services stage 3; Sub-part 6: Call Authorized by Dispatcher (CAD)
ETSI EN 300 392-12-6 V1.3.1 (2006-02)

The present document defines the stage 3 specifications of the Supplementary Service Call Authorized by Dispatcher (SS-CAD) for the Terrestrial Trunked RAdio (TETRA) as provided by European operators. Stage 3 defines the signalling system protocols needed to implement the service described in stage 1 and stage 2. The stage 1 and stage 2 aspects are detailed in EN 300 392 10-6 [2] and EN 300 392-11-6 [3] respectively. Aspects relating to all supplementary services are detailed in EN 300392-9 [6]. Charging principles and the Man-Machine Interface (MMI) are outside the scope of the present document. The SS-CAD ensures that predefined TETRA calls do not proceed without first being authorized by a dispatcher.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 392-9 V1.3.1:2006(Main)
Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 9: General requirements for supplementary services
ETSI EN 300 392-9 V1.3.1 (2004-11)

The present document defines principles and requirements generally applicable to the stage 2 and 3 descriptions of supplementary services for the Terrestrial Trunked Radio (TETRA). The present document is applicable to any TETRA terminal equipment (Mobile Station (MS) or Line Station (LS) and to any TETRA network (Switching and Management Infrastructure - SwMI) which support at least one TETRA Supplementary Service (SS). In addition, its routeing requirements of supplementary service information are applicable to any TETRA network with a Voice plus Data (V+D) Inter-System Interface (ISI) to another TETRA network which supports at least one TETRA SS.

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 392-10-12 V1.3.1:2006(Main)
Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 10: Supplementary services stage 1; Sub-part 12: Call Hold (HOLD)
ETSI EN 300 392-10-12 V1.3.1 (2004-02)

The present document defines the stage 1 description of the call hold supplementary service (SS-HOLD) for the Terrestrial Trunked RAdio (TETRA) as provided by European operators. The stage 1 description is an overall service description from the user point of view but does not deal with the details of the human interface itself (see ITU-T Recommendation I.130 [1]). SS-HOLD enables a user to interrupt communication on an existing individual call and then subsequently, if desired, re-establish communication. The present document specifies the service description of the supplementary service and the procedures to be expected with successful and unsuccessful outcomes. In addition the present document specifies the interactions with other TETRA supplementary services and Interworking considerations. Charging principles are outside the scope of the present document.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 395-3 V1.2.1:2006(Main)
Terrestrial Trunked Radio (TETRA); Speech codec for full-rate traffic channel; Part 3: Specific operating features
ETSI EN 300 395-3 V1.2.1 (2005-01)

The present document describes all the functions associated with the TETRA speech codec, except the specification of the codec by itself which is entirely defined in EN 300 395-2 [1]. Clause 4 of the present document provides a description of the functions associated with the speech encoder, while clause 5 is its counterpart for the speech decoder. Clause 6 describes the contents and the format of the signalling data block included in a stolen frame when used for transferring information relevant to the codec in a U-plane signalling message. In addition, annex A provides indications and preferred solutions for the implementation of optional features.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 396-3 V1.2.1:2006(Main)
Terrestrial Trunked Radio (TETRA); Technical requirements for Direct Mode Operation (DMO); Part 3: Mobile Station to Mobile Station (MS-MS) Air Interface (AI) protocol
ETSI EN 300 396-3 V1.2.1 (2004-12)

The multi-part deliverable EN 300 396 defines the TErrestrial Trunked RAdio (TETRA) Direct Mode Operation (DMO). It specifies the basic air interface, the inter-working between Direct Mode (DM) groups via repeaters, and inter-working with the TETRA Voice plus Data (V+D) system via gateways. It also specifies the security aspects in TETRA DMO, and the intrinsic services that are supported in addition to the basic bearer and teleservices. The present document applies to the TETRA DMO Mobile Station - Mobile Station (MS-MS) air interface and contains the specifications of the Data Link Layer (DLL) and the network layer according to the ISO model. It establishes the services, messages and protocols used for voice and circuit mode data calls and short data transfer, starting with the upper layers:
- it defines and specifies the protocol used by the layer 3 entity to communicate across the air interface;
- it defines and specifies the services and protocol used in the DLL.
The normative annexes mainly specify the parameter values used in the protocol.

  • Standard
    200 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 392-12-22 V1.3.1:2006(Main)
Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 12: Supplementary services stage 3; Sub-part 22: Dynamic Group Number Assignment (DGNA)
ETSI EN 300 392-12-22 V1.3.1 (2005-04)

The present document defines the stage 3 specifications of the Supplementary Service Dynamic Group Number Assignment (SS-DGNA) for the Terrestrial Trunked Radio (TETRA). The SS-DGNA enables a user to dynamically define group identities and group related parameters to the TETRA system and to the subscribers in the system. These definitions are used to enable group call invocations to dynamically defined groups. The SS-DGNA specification defines the creation, modification, deletion and interrogation of group definitions in the Switching and Management Infrastructure (SwMI), in the Mobile Station (MS). The present document does not include the specification for access priority used for random access in uplink and call priority used by SwMI for resource allocation in a group call. Access priority and call priority can be specified and applied for groups using Supplementary Services Access Priority (SS-AP), Priority Call (SS-PC) and Pre-emptive Priority Call (SS-PPC). Thus, the definition procedure of these priorities is outside the scope of the present document. Man-Machine Interface (MMI) and charging principles are also outside the scope of the present document. Supplementary service stage 3 specification is preceded by the stage 1 and the stage 2 specifications of the service. Stage 1 describes the functional capabilities from the user's point of view. Stage 2 defines the functional behaviour in terms of functional entities and information flows. Stage 3 gives the precise description of the supplementary service from the implementation point of view. It defines the protocols for the service and the encoding rules for the information flows. It defines the processes for the functional entities and their behaviour. The described protocols and their behaviour apply for the SwMI and for the MS and can be applied over the Inter-System Interface (ISI) between TETRA systems.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 812-3 V2.2.1:2006(Main)
Terrestrial Trunked Radio (TETRA); Subscriber Identity Module to Mobile Equipment (SIM-ME) interface; Part 3: Integrated Circuit (IC); Physical, logical and TSIM application characteristics
ETSI EN 300 812-3 V2.2.1 (2004-02)

The present document defines the interface between the Subscriber Identity Module (SIM) and the Mobile Equipment
(ME) for use during the network operation phase of TETRA as well as those aspects of the internal organization of the
SIM which are related to the network operation phase. This is to ensure interoperability between a SIM and a ME independently of the respective manufacturers and operators. The concept of a split of the MS into these elements as well as the distinction between the TETRA network operation phase, which is also called TETRA operations, and the administrative management phase is described in the User Requirement Specification ETR 295 [6].
The present document defines:
• the requirements for the physical characteristics of the SIM, the electrical signals and the transmission protocols;
• the model which shall be used as a basis for the design of the logical structure of the SIM;
• the security features; This edition of the standard covers the security mechanisms for ITSI based services including authentication and OTAR for keys addressed to an ITSI;
• the interface functions;
• the commands;
• the contents of the files required for the TETRA application;
• the application protocol.
The present document does not specify any aspects related to the administrative management phase. Any internal technical realization of either the SIM or the ME are only specified where these reflect over the interface. The present document does not specify any of the security algorithms which may be used.
The physical SIM described in the present document is a removable Integrated Circuit (IC) card. The SIM is an optional device within TETRA MSs. The present document does not preclude the implementation of fully functional MSs without a SIM. All references to mobile equipment in the present document are to be taken to mean mobile equipment which have been designed to operate with a SIM.
The present document deals with all aspects of trunked mode MS operation. For direct mode MS operation key user operation is supported by the SIM but not key holder or key generator operation. Furthermore, storage of information for direct mode MS operation in repeater and gateway mode are supported, but any extra storage required in the direct mode repeater or direct mode gateway terminals themselves is not supported.

  • Standard
    175 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 392-9 V1.2.1:2006(Main)
Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 9: General requirements for supplementary services
ETSI EN 300 392-9 V1.2.1 (2004-01)

The present document defines principles and requirements generally applicable to the stage 2 and 3 descriptions of supplementary services for the Terrestrial Trunked Radio (TETRA). The present document is applicable to any TETRA terminal equipment (Mobile Station (MS) or Line Station (LS) and to any TETRA network (Switching and Management Infrastructure - SwMI) which support at least one TETRA Supplementary Service (SS). In addition, its routeing requirements of supplementary service information are applicable to any TETRA network with a Voice plus Data (V+D) Inter-System Interface (ISI) to another TETRA network which supports at least one TETRA SS.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day