iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 492:1998/AC:2000

(Amendment)

Fibre-cement slates and their fittings for roofing - Productspecification and test methods

Fibre-cement slates and their fittings for roofing - Productspecification and test methods

Faserzement - Dachplatten und dazugehörige Formteile für Dächer - Produktspezifikation und Prüfverfahren

Ardoises en fibres-ciment et leurs accessoires en fibres-ciment pour toiture - Spécification du produit et méthodes d'essai

Vlaknatocementne strešne plošče in fazonski kosi - Specifikacije in preskusne metode

General Information

Status
Withdrawn
Publication Date
30-Sep-2000
Withdrawal Date
28-Feb-2005
ICS
91.060.20 - Roofs
91.100.40 - Products in fibre-reinforced cement
Technical Committee
IKER - Ceramics
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Mar-2005
Due Date
01-Mar-2005
Completion Date
01-Mar-2005
Directive
89/106/EEC - Construction products
Mandate
M/BC/CEN/87/13 - Standardization request in the field of Construction products - pitched roofing products
Ref Project
EN 492:1994/AC:1996 - Fibre-cement slates and their fittings for roofing - Productspecification and test methods

Relations

Replaced By
SIST EN 492:2005 - Fibre-cement slates and fittings - Product specification and test methods
Effective Date
01-Mar-2005
Replaces
SIST EN 492:1998/AC1:1998 - Fibre-cement slates and their fittings for roofing - Product specification and test methods
Effective Date
22-Dec-2008
Corrects
SIST EN 492:1998 - Fibre-cement slates and their fittings for roofing - Product specification and test methods
Effective Date
22-Dec-2008

Buy Standard

EN 492:1998/AC:2000EN 492:1998/AC:2000
PreviousNext
Corrigendum
EN 492:1998/AC:2000
English language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.PHWRGHFaserzement - Dachplatten und dazugehörige Formteile für Dächer - Produktspezifikation und PrüfverfahrenArdoises en fibres-ciment et leurs accessoires en fibres-ciment pour toiture - Spécification du produit et méthodes d'essaiFibre-cement slates and their fittings f
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 17468-1:2022(Main)
Fibre cement products - Determination of pull through and shear resistance and bending strength calculations - Part 1: Flat sheets
EN 17468-1:2022

This document specifies a test method for pull through and shear resistance of fibre-cement flat sheets for roofing and cladding.
The results are also applicable for:
-   Coated or uncoated sheets manufactured at the same production facility as the tested sheets.
-   The test method can be applied to textured or non-textured fibre-cement flat sheets. The results of non-textured sheets are only applicable for textured sheets if the nominal minimum thickness of the textured sheet is at least the nominal thickness of the non-textured sheet.
-   The same type of fixing head or washer assembly where applicable if the diameter of the fixing head or washer is 0 mm to 2 mm larger than in the test.
-   The Shore A hardness of the sealing washer, where applicable, is ± 5 that of the washer used in the test.
-   The diameter of the drilled hole through the fibre cement sheet is 0 mm to 2 mm smaller than in the test, providing there is the required clearance hole around the shank of the fastener.
It applies only to products as delivered.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17468-2:2022(Main)
Fibre-cement products - Determination of pull through and shear resistance and bending strength calculations - Part 2: Profiled sheets
EN 17468-2:2022

This document specifies test methods for pull through resistance and shear resistance of fibre-cement profiled sheets for roofing and cladding. The results are only applicable to the fibre cement product and not to the complete fixing assembly.
It applies only to products as delivered.
The field of application for pull through resistance is defined in 7.6.
The field of application for shear resistance is defined in 8.6.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 492:2013+A2:2018(Main)
Fibre-cement slates and fittings - Product specification and test methods
EN 492:2012+A2:2018

This European Standard specifies the technical requirements and establishes methods of control and test as well as acceptance conditions for fibre-cement slates and their fibre-cement fittings for one or more of the following uses:
-   roofing;
-   internal wall finishes;
-   external wall and ceiling finishes.
This European Standard applies to fibre-cement slates with a height dimension h (see Clause 4) not exceeding 850 mm for overlapping assembly. For the purpose of this European Standard, fibre-cement slates have been classified according to their bending moment.
This European Standard covers fibre-cement slates reinforced with fibres of different types as specified in 5.1.1.
This European Standard does not include calculations with regard to works, design requirements, installation techniques, wind uplift or rain proofing of the installed products.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 494:2013+A1:2015(Main)
Fibre-cement profiled sheets and fittings - Product specification and test methods
EN 494:2012+A1:2015

This European Standard specifies the technical requirements and establishes methods of control and test as well as acceptance conditions for fibre-cement profiled sheets and their fibre-cement fittings for one or more of the following uses:
-   roofing;
-   internal wall finishes;
-   external wall and ceiling finishes.
For the purpose of this European Standard, fibre-cement profiled sheets are classified according to their height of corrugation and their mechanical characteristics.
This European Standard covers fibre-cement profiled sheets reinforced with fibres of different type as specified in 5.1.1, with and without factory applied coating.
This European Standard does not include calculations with regard to works, design requirements, installation techniques, wind uplift or rain proofing of the installed sheets.
NOTE   Some of these requirements can be applied, after agreement, to curved sheets for specific applications.

  • Standard
    71 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15057:2006(Main)
Fibre cement profiled sheets - Impact resistance test method
EN 15057:2006

This European Standard specifies a soft body impact test method for fibre-cement profiled sheets for roofing.
This European Standard applies to fibre-cement profiled sheets conforming to EN 494 and of length greater than or equal to 1,04 m.
It applies only to products as delivered.
NOTE   This European Standard can be applied, after agreement between manufacturer and purchaser, to curved sheets.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 492:2013/kFprA1:2015(Amendment)
Fibre-cement slates and fittings - Product specification and test methods
EN 492:2012/FprA1:2015

This European Standard specifies the technical requirements and establishes methods of control and test as well as acceptance conditions for fibre-cement slates and their fibre-cement fittings for one or more of the following uses:
- roofing
- internal wall finishes
- external and ceiling finishes.
This European Standard applies to fibre-cement slates with a height dimension h (see Clause 4) not exceeding 850 mm for overlapping assembly. For the purpose of this European Standard, fibre-cement slates have been classified according to their bending moment.
This European Standard covers fibre-cement slates reinforced with fibres of different types as specified in 5.1.1.
This European Standard does not include calculations with regard to works, design requirements, installation techniques, wind uplift or rain proofing of the installed products.

  • Amendment
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 494:2013/kFprA1:2015(Amendment)
Fibre-cement profiled sheets and fittings - Product specification and test methods
EN 494:2012/FprA1

This European Standard specifies the technical requirements and establishes methods of control and test as well as acceptance conditions for fibre-cement profiled sheets and their fibre-cement fittings for one or more the following uses:
- roofing;
- internal wall finishes;
- external wall and ceiling finishes.
For the purpose of this European Standard, fibre-cement profiles sheets are classified according to their height of corrugation and their mechanical characteristics.
This European Standard covers fibre-cement profiled sheets reinforced with fibres of different type as specified in  5.1.1, with and without facotory applied coating.
This European Standard does not include calculations with regard to works, design requirements, installation techniques, wind uplift or rain proofing of the installed sheets.
NOTE: Some of these requirements can be applied, after agreement, to curved sheets for specific applications

  • Amendment
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17468-1:2022(Main)
Fibre cement products - Determination of pull through and shear resistance and bending strength calculations - Part 1: Flat sheets
EN 17468-1:2022

This document specifies a test method for pull through and shear resistance of fibre-cement flat sheets for roofing and cladding.
The results are also applicable for:
-   Coated or uncoated sheets manufactured at the same production facility as the tested sheets.
-   The test method can be applied to textured or non-textured fibre-cement flat sheets. The results of non-textured sheets are only applicable for textured sheets if the nominal minimum thickness of the textured sheet is at least the nominal thickness of the non-textured sheet.
-   The same type of fixing head or washer assembly where applicable if the diameter of the fixing head or washer is 0 mm to 2 mm larger than in the test.
-   The Shore A hardness of the sealing washer, where applicable, is ± 5 that of the washer used in the test.
-   The diameter of the drilled hole through the fibre cement sheet is 0 mm to 2 mm smaller than in the test, providing there is the required clearance hole around the shank of the fastener.
It applies only to products as delivered.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17468-2:2022(Main)
Fibre-cement products - Determination of pull through and shear resistance and bending strength calculations - Part 2: Profiled sheets
EN 17468-2:2022

This document specifies test methods for pull through resistance and shear resistance of fibre-cement profiled sheets for roofing and cladding. The results are only applicable to the fibre cement product and not to the complete fixing assembly.
It applies only to products as delivered.
The field of application for pull through resistance is defined in 7.6.
The field of application for shear resistance is defined in 8.6.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 492:2013+A2:2018(Main)
Fibre-cement slates and fittings - Product specification and test methods
EN 492:2012+A2:2018

This European Standard specifies the technical requirements and establishes methods of control and test as well as acceptance conditions for fibre-cement slates and their fibre-cement fittings for one or more of the following uses:
-   roofing;
-   internal wall finishes;
-   external wall and ceiling finishes.
This European Standard applies to fibre-cement slates with a height dimension h (see Clause 4) not exceeding 850 mm for overlapping assembly. For the purpose of this European Standard, fibre-cement slates have been classified according to their bending moment.
This European Standard covers fibre-cement slates reinforced with fibres of different types as specified in 5.1.1.
This European Standard does not include calculations with regard to works, design requirements, installation techniques, wind uplift or rain proofing of the installed products.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day