SIST EN 2591-6401:2004

Aerospace series - Elements of electrical and optical connection - Test methods - Part 6401: Optical elements - Acceleration steady state

This standard specifies a method of determining the ability of optical connection elements (including permanent connections) and fibre optic couplers to withstand continuous acceleration.
It shall be used together with EN 2591-100.

Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 6401: Optische Verbindungselemente - Konstante Beschleunigung

Diese Norm legt ein Verfahren zum Nachweis der Widerstandsfähigkeit von optischen Verbindungselementen (einschließlich dauerhaften Verbindungen) und LWL-Kopplern gegenüber konstanter Beschleunigung fest.
Sie ist in Verbindung mit EN 2591-100 anzuwenden.

Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 6401 : Organes optiques - Accélération constante

La présente norme prescrit une méthode pour déterminer la capacité pour des éléments de connexion optique (y compris les connexions permanentes) et des coupleurs a fibre optiques a résister a des accélérations constantes.
Elle doit etre utilisée conjointement avec EN 2591-100.

Aerospace series - Elements of electrical and optical connection - Test methods - Part 6401: Optical elements - Acceleration steady state

General Information

• Status: Published
• Publication Date: 30-Apr-2004
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I08 - Imaginarni 08
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-May-2004
• Due Date: 01-May-2004
• Completion Date: 01-May-2004
• Ref Project: EN 2591-6401:2001 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 6401: Optical elements - Acceleration steady state

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Elements of electrical and optical connection - Test methods - Part 6401: Optical elements - Acceleration steady stateLuft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 6401: Optische Verbindungselemente - Konstante BeschleunigungSérie aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 6401 : Organes optiques - Accélération constanteAerospace series - Elements of electrical and optical connection - Test methods - Part 6401: Optical elements - Acceleration steady state49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 2591-6401:2001SIST EN 2591-6401:2004en01-maj-2004SIST EN 2591-6401:2004SLOVENSKI
STANDARD



SIST EN 2591-6401:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 2591-6401December 2001ICS 49.060English versionAerospace series - Elements of electrical and optical connection- Test methods - Part 6401: Optical elements - Accelerationsteady stateSérie aérospatiale - Organes de connexion électrique etoptique - Méthodes d'essais - Partie 6401: Organesoptiques - Accélération constanteLuft- und Raumfahrt - Elektrische und optischeVerbindungselemente - Prüfverfahren - Teil 6401: OptischeElemente - Konstante BeschleunigungThis European Standard was approved by CEN on 5 August 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2591-6401:2001 ESIST EN 2591-6401:2004



EN 2591-6401:2001 (E)2ForewordThis European Standard has been prepared by the European Association of Aerospace Manufacturers(AECMA).After inquiries and votes carried out in accordance with the rules of this Association, this Standard hasreceived the approval of the National Associations and the Official Services of the member countries ofAECMA, prior to its presentation to CEN.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorse
...