SIST EN 60745-2-19:2005/A11:2008
Hand-held motor-operated electric tools - Safety -- Part 2-19: Particular requirements for jointers
Hand-held motor-operated electric tools - Safety -- Part 2-19: Particular requirements for jointers
FprAA ratified as EN 60745-2-19:2005/A11 * Superseded by EN 60745-2-19:2009
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit -- Teil 2-19: Besondere Anforderungen für Flachdübelfräsen
Outils électroportatifs à moteur - Sécurité -- Partie 2-19: Règles particulières pour les mortaiseuses
Ročna električna orodja - Varnost - 2-19. del: Posebne zahteve za rezalnike z rezalno ploščo za rezanje rež in utorov
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60745-2-19:2005/A11:2008
01-marec-2008
5RþQDHOHNWULþQDRURGMD9DUQRVW GHO 3RVHEQH]DKWHYH]DUH]DOQLNH]
UH]DOQRSORãþR]DUH]DQMHUHåLQXWRURY
Hand-held motor-operated electric tools - Safety -- Part 2-19: Particular requirements for
jointers
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit -- Teil 2-19: Besondere
Anforderungen für Flachdübelfräsen
Outils électroportatifs à moteur - Sécurité -- Partie 2-19: Règles particulières pour les
mortaiseuses
Ta slovenski standard je istoveten z: EN 60745-2-19:2005/A11:2007
ICS:
25.100.01 Rezalna orodja na splošno Cutting tools in general
25.140.20 (OHNWULþQDRURGMD Electric tools
SIST EN 60745-2-19:2005/A11:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60745-2-19:2005/A11:2008
---------------------- Page: 2 ----------------------
SIST EN 60745-2-19:2005/A11:2008
EUROPEAN STANDARD
EN 60745-2-19/A11
NORME EUROPÉENNE
July 2007
EUROPÄISCHE NORM
ICS 25.140.20
English version
Hand-held motor-operated electric tools -
Safety -
Part 2-19: Particular requirements for jointers
Outils électroportatifs à moteur - Handgeführte motorbetriebene
Sécurité - Elektrowerkzeuge -
Partie 2-19: Règles particulières Sicherheit -
pour les mortaiseuses Teil 2-19: Besondere Anforderungen
für Flachdübelfräsen
This amendment A11 modifies the European Standard EN 60745-2-19:2005; it was approved by CENELEC on
2007-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60745-2-19:2005/A11:2007 E
---------------------- Page: 3 ------------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.