Aerospace series - Elements of electrical and optical connection - Test methods - Part 508: Measurement of thickness of coating on contacts

This standard specifies methods of measuring thickness of electro-deposited gold or gold alloys coatings on contacts of elements of connection.
It shall be used together with EN 2591-100.

Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 508: Messung der Schutzschichtdicke

Diese Norm legt Verfahren zum Messen der Dicke von elektrolytisch abgeschiedenen Schutzschichten aus Gold oder Goldlegierungen auf Kontakten von Verbindungselementen fest.
Sie ist in Verbindung mit EN 2591-100 anzuwenden.

Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 508 : Mesure de l'épaisseur du revetement des contacts

La présente norme prescrit des méthodes permettant de mesurer l'épaisseur du revetement des contacts électriques.
Elle doit etre utilisée conjointement avec EN 2591-100.

Aerospace series - Elements of electrical and optical connection - Test methods - Part 508: Measurement of thickness of coating on contacts

General Information

Status
Withdrawn
Publication Date
30-Apr-2004
Withdrawal Date
11-Oct-2023
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
11-Oct-2023
Due Date
03-Nov-2023
Completion Date
12-Oct-2023

Relations

Buy Standard

Standard
EN 2591-508:2004
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Elements of electrical and optical connection - Test methods - Part 508: Measurement of thickness of coating on contactsLuft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 508: Messung der SchutzschichtdickeSérie aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 508 : Mesure de l'épaisseur du revetement des contactsAerospace series - Elements of electrical and optical connection - Test methods - Part 508: Measurement of thickness of coating on contacts49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 2591-508:2001SIST EN 2591-508:2004en01-maj-2004SIST EN 2591-508:2004SLOVENSKI
STANDARD



SIST EN 2591-508:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 2591-508December 2001ICS 49.060English versionAerospace series - Elements of electrical and optical connection- Test methods - Part 508: Measurement of thickness of coatingon contactsSérie aérospatiale - Organes de connexion électrique etoptique - Méthodes d'essais - Partie 508: Mesure del'épaisseur du revêtement des contactsLuft- und Raumfahrt - Elektrische und optischeVerbindungselemente - Prüfverfahren - Teil 508: Messungder SchutzschichtdickeThis European Standard was approved by CEN on 5 August 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any fo
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.