SIST EN 3613:2009

Aerospace series - Bolts, normal hexagonal head, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1275 MPa/650 °C

This standard specifies the characteristics of bolts normal hexagonal head with relieved shank and long thread in heat resisting nickel base alloy NI-PH2601 (Inconel 718), for aerospace applications.

Luft- und Raumfahrt - Sechskantschrauben, Dünnschaft, langes Gewinde, aus hochwarmfester Nickelbasislegierung NI-PH2601 (Inconel 718), versilbert - Klasse: 1275 MPa/650 °C

Diese Norm legt die Eigenschaften von Sechskantschrauben mit Dünnschaft und langem Gewinde aus
hochwarmfester Nickelbasislegierung NI-PH2601 (Inconel 718) für die Anwendung in der Luft- und Raumfahrt
fest.
Klasse: 1 275 MPa1)/650 °C2)

Série aérospatiale - Vis à tête hexagonale normale, fût dégagé, filetage long, en alliage base nickel, résistant à chaud NI-PH2601 (Inconel 718), argentées - Classification: 1275 MPa/650 °C

Aeronavtika - Sorniki, normalna šestroba glava, tanko steblo, dolg navoj, iz toplotnoodporne zlitine na nikljevi osnovi NI-PH2601 (Inconel 718), posrebreni - Klasifikacija: 1275 MPa/650 °C

General Information

• Status: Published
• Publication Date: 20-Aug-2009
• ICS: 49.030.20 - Bolts, screws, studs
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 13-Jul-2009
• Due Date: 17-Sep-2009
• Completion Date: 21-Aug-2009
• Ref Project: EN 3613:2009 - Aerospace series - Bolts, normal hexagonal head, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1 275 MPa/650 °C

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 3613:2009
01-oktober-2009
Aeronavtika - Sorniki, normalna šestroba glava, tanko steblo, dolg navoj, iz
toplotnoodporne zlitine na nikljevi osnovi NI-PH2601 (Inconel 718), posrebreni -
Klasifikacija: 1275 MPa/650 °C
Aerospace series - Bolts, normal hexagonal head, relieved shank, long thread, in heat
resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1275
MPa/650 °C
Luft- und Raumfahrt - Sechskantschrauben, Dünnschaft, langes Gewinde, aus
hochwarmfester Nickelbasislegierung NI-PH2601 (Inconel 718), versilbert - Klasse: 1275
MPa/650 °C
Série aérospatiale - Vis à tête hexagonale normale, fût dégagé, filetage long, en alliage
base nickel, résistant à chaud NI-PH2601 (Inconel 718), argentées - Classification: 1275
MPa/650 °C
Ta slovenski standard je istoveten z: EN 3613:2009
ICS:
49.030.20 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
SIST EN 3613:2009 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 3613:2009

---------------------- Page: 2 ----------------------

SIST EN 3613:2009


EUROPEAN STANDARD
EN 3613

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2009
ICS 49.030.20
English Version
Aerospace series - Bolts, normal hexagonal head, relieved
shank, long thread, in heat resisting nickel base alloy NI-
PH2601 (Inconel 718), silver plated - Classification: 1 275
MPa/650 °C
Série aérospatiale - Vis à tête hexagonale normale, fût Luft- und Raumfahrt - Sechskantschrauben, Dünnschaft,
dégagé, filetage long, en alliage base nickel, résistant à langes Gewinde, aus hochwarmfester Nickelbasislegierung
chaud NI-PH2601 (Inconel 718), argentées - Classification : NI-PH2601 (Inconel 718), versilbert - Klasse: 1 275
1 275 MPa/650 °C MPa/650 °C
This European Standard was approved by CEN on 20 May 2009.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3613:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 3613:2009
EN 3613:2009 (E)
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Requirements characteristics .4
4 Designation .8
5 Marking .8
6 Technical specification .8

2

---------------------- Page: 4 ----------------------

SIST EN 3613:2009
EN 3613:2009 (E)
Foreword
This document (EN 3613:2009) has been prepared by the Aerospace and Defence Industries Association of
Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2010, and conflicting national standards shall be withdrawn at
the latest by January 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST EN 3613:2009
EN 3613:2009 (E)
1 Scope
This standard specifies the characteristics of bolts normal hexagonal head with relieved shank and long
thread in heat resisting nickel base alloy NI-PH2601 (Inconel 718), for aerospace applications.
1) 2)
Classification: 1 275 MPa / 650 °C
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
EN 2424, Aerospace se
...