SIST EN 62634:2011
(Main)Radio data system (RDS) - Receiver products and characteristics - Methods of measurement (IEC 62634:2011)
Radio data system (RDS) - Receiver products and characteristics - Methods of measurement (IEC 62634:2011)
This International Standard describes how to measure minimum RDS receiver performance
requirements which concern three RDS receiver product categories. However, it should be
noted that there are also RDS receiver products on the market that significantly out-perform
the minimum RDS receiver performance requirements quoted.
Methods and algorithms to achieve automatic programme service-following by means of AF
lists are, however, very customer- and manufacturer-specific, and are therefore not covered in
this standard.
RDS-Empfänger-Produkte und Eigenschaften - Messverfahren (IEC 62634:2011)
Système de radiodiffusion de données - Caractéristiques et méthodes de mesure des récepteurs RDS (CEI 62634:2011)
La CEI 62634:2011 décrit les exigences minimales de performance des récepteurs RDS, qui concernent trois catégories de produits de récepteurs RDS. Il convient de noter qu'il existe sur le marché des récepteurs RDS qui dépassent largement les exigences minimales de performances indiquées ici pour les récepteurs RDS. Les méthodes et algorithmes utilisés pour le suivi automatique des stations au moyen des listes AF sont spécifiques aux clients et aux fabricants; par conséquent, cet aspect est volontairement exclu de la présente norme. Cette publication annule et remplace la CEI 60315-9, publiée en 1996, et constitue une révision technique. Les modifications principales par rapport à la CEI 60315-9 sont les suivantes: - utilisation de méthodes de mesure conformes à l'état de l'art avec des produits RDS actuels; - indication d'objectifs de performances réalistes; - complémentarité à la norme sur le système RDS, CEI 62106 (2009), traitement des conditions de réception RDS difficiles 'signal faible', 'canal adjacent' et 'signal fort' pour confirmer les exigences de sensibilité et de sélectivité pour trois catégories différentes de produits RDS.
Radijski podatkovni sistem (RDS) - Izdelki za sprejemnike in karakteristike - Merilne metode (IEC 62634:2011)
Ta mednarodni standard opisuje, kako meriti minimalne zahteve delovanja sprejemnikov RDS,
ki se nanašajo na tri proizvodne kategorije sprejemnikov RDS. Treba pa je
opozoriti, da so na trgu tudi izdelki za sprejemnike RDS, ki precej prekašajo
navedene minimalne delovne zahteve sprejemnika RDS.
Metode in algoritmi za doseganje avtomatske programske storitve – po seznamih
AF – pa so zelo specifični za stranko in proizvajalca, zato niso zajeti v tem standardu.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62634:2011
01-november-2011
1DGRPHãþD
SIST EN 60315-9:1999
Radijski podatkovni sistem (RDS) - Izdelki za sprejemnike in karakteristike -
Merilne metode (IEC 62634:2011)
Radio data system (RDS) - Receiver products and characteristics - Methods of
measurement (IEC 62634:2011)
RDS-Empfänger-Produkte und Eigenschaften - Messverfahren (IEC 62634:2011)
Système de radiodiffusion de données - Caractéristiques et méthodes de mesure des
récepteurs RDS (CEI 62634:2011)
Ta slovenski standard je istoveten z: EN 62634:2011
ICS:
33.060.20 Sprejemna in oddajna Receiving and transmitting
oprema equipment
SIST EN 62634:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 62634:2011
---------------------- Page: 2 ----------------------
SIST EN 62634:2011
EUROPEAN STANDARD
EN 62634
NORME EUROPÉENNE
August 2011
EUROPÄISCHE NORM
ICS 33.060.20 Supersedes EN 60315-9:1996
English version
Radio data system (RDS) -
Receiver products and characteristics -
Methods of measurement
(IEC 62634:2011)
Système de radiodiffusion de données - RDS-Empfänger-Produkte und -
Caractéristiques et méthodes de mesure Eigenschaften -
des récepteurs RDS Messverfahren
(CEI 62634:2011) (IEC 62634:2011)
This European Standard was approved by CENELEC on 2011-08-02. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62634:2011 E
---------------------- Page: 3 ----------------------
SIST EN 62634:2011
EN 62634:2011 - 2 -
Foreword
The text of document 100/1813/FDIS, future edition 1 of IEC 62634, prepared by IEC TC 100, Audio,
video and multimedia systems and equipment, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 62634 on 2011-08-02.
This European Standard supersedes EN 60315-9:1996.
EN 62634:2011 includes the following significant technical changes with respect to EN 60315-9:1996:
– use of state-of-the-art measuring methods based on today’s RDS products,
– provision of realistic performance targets,
– is complementary to RDS standard EN 62106:2009,
– it covers the challenging RDS receiving conditions “weak signal”, “adjacent channel” and “strong signal”
to verify the required RDS sensitivity and selectivity for three different RDS product categories.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2012-05-02
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2014-08-02
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62634:2011 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60315-9:1996 NOTE Harmonized as EN 60315-9:1996 (not modified).
ISO 14819 series NOTE Harmonized in EN ISO 14819 series.
__________
---------------------- Page: 4 ----------------------
SIST EN 62634:2011
- 3 - EN 62634:2011
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 62106 2009 Specification of the Radio Data System EN 62106 2009
(RDS) for VHF/FM sound broadcasting in the
frequency range from 87,5 MHz to 108,0 MHz
---------------------- Page: 5 ----------------------
SIST EN 62634:2011
---------------------- Page: 6 ----------------------
SIST EN 62634:2011
IEC 62634
®
Edition 1.0 2011-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Radio data system (RDS) – Receiver products and characteristics – Methods of
measurement
Système de radiodiffusion de données – Caractéristiques et méthodes de
mesure des récepteurs RDS
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX Q
ICS 33.060.20 ISBN 978-2-88912-503-6
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN 62634:2011
– 2 – 62634 IEC:2011
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms, definitions and abbreviations . 7
3.1 Terms and definitions . 7
3.2 Abbreviations . 8
4 Measuring method . 8
4.1 Standard measuring signal . 8
4.2 RDS data conditions . 9
4.2.1 General . 9
4.2.2 Matching circuit . 9
5 Measurement of the RDS sensitivity . 10
5.1 General . 10
5.2 Method of measurement . 10
5.3 Presentation of the results . 10
6 Measurement of the RDS data acquisition . 10
6.1 General . 10
6.2 Time to synchronise . 10
6.3 Time to detect a first PI . 11
6.4 Method of measurement . 11
7 Measurement of the large signal capabilities . 11
7.1 General . 11
7.2 Resistance to high wanted signal levels . 11
7.2.1 Method of measurement . 11
7.2.2 Large wanted signal requirement . 11
7.3 RDS performance at large unwanted signal . 11
7.3.1 Method of measurement . 11
7.3.2 Large unwanted signal requirements . 12
8 Measurement of the RDS selectivity . 12
8.1 General . 12
8.2 Method of measurement . 12
9 Considerations and guidelines for evaluation of the dynamic RDS performance . 13
9.1 General . 13
9.2 RDS dynamic behaviour . 13
9.3 Traffic announcements TA/TP . 14
9.3.1 TA message . 14
9.3.2 End of TA message . 14
9.3.3 TP search . 14
9.3.4 TA announcement skip . 14
9.4 Regionalisation . 15
9.4.1 Implementations . 15
9.4.2 Requirement . 15
Bibliography . 16
---------------------- Page: 8 ----------------------
SIST EN 62634:2011
62634 IEC:2011 – 3 –
Figure 1 – Coupling circuit . 9
Figure 2 – Matching circuits for RDS product devices with three different input
impedances . 9
Table 1 – Presentation of the measurement result . 12
Table 2 – AF example . 15
---------------------- Page: 9 ----------------------
SIST EN 62634:2011
– 4 – 62634 IEC:2011
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
RADIO DATA SYSTEM (RDS) –
RECEIVER PRODUCTS AND CHARACTERISTICS –
METHODS OF MEASUREMENT
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62634 has been prepared by technical area 1: Terminals for audio,
video and data services and content, of IEC technical committee 100: Audio, video and
multimedia systems and equipment.
International Standard IEC 62634 cancels and replaces IEC 60315-9, published in 1996, and
constitutes a technical revision.
This edition includes the following significant technical changes with respect to IEC 60315-9:
– use of state-of-the-art measuring methods based on today’s RDS products,
– provision of realistic performance targets,
– is complementary to RDS standard IEC 62106 (2009),
– it covers the challenging RDS receiving conditions “weak signal”, “adjacent channel” and
“strong signal” to verify the required RDS sensitivity and selectivity for three different RDS
product categories.
---------------------- Page: 10 ----------------------
SIST EN 62634:2011
62634 IEC:2011 – 5 –
The text of this standard is based on the following documents:
FDIS Report on voting
100/1813/FDIS 100/1850/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
---------------------- Page: 11 ----------------------
SIST EN 62634:2011
– 6 – 62634 IEC:2011
INTRODUCTION
This International Standard gives commonly agreed measuring methods to complement the
RDS standard IEC 62106 (2009) and the RBDS standard (NRSC-4-A) in the USA.
The RDS measuring methods presented here are directed at all manufacturers of RDS
receiver products, and in particular tuner modules with embedded RDS functionality, including
TMC (see ISO 14819 series of standards).
---------------------- Page: 12 ----------------------
SIST EN 62634:2011
62634 IEC:2011 – 7 –
RADIO DATA SYSTEM (RDS) –
RECEIVER PRODUCTS AND CHARACTERISTICS –
METHODS OF MEASUREMENT
1 Scope
This International Standard describes how to measure minimum RDS receiver performance
requirements which concern three RDS receiver product categories. However, it should be
noted that there are also RDS receiver products on the market that significantly out-perform
the minimum RDS receiver performance requirements quoted.
Methods and algorithms to achieve automatic programme service-following by means of AF
lists are, however, very customer- and manufacturer-specific, and are therefore not covered in
this standard.
2 Normative references
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
IEC 62106:2009, Specification of the radio data system (RDS) for VHF/FM sound
broadcasting in the frequency range from 87,5 MHz to 108,0 MHz
3 Terms, definitions and abbreviations
3.1 Terms and definitions
For the purpose of this document, the following terms and definitions apply.
3.1.1
RDS product category 1
RDS receiver product with high-ohmic input impedance (e.g.for portable devices)
3.1.2
RDS product category 2
RDS receiver product with 50 Ω input impedance (e.g.car radio optimized for active antenna)
3.1.3
RDS product category 3
RDS
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.