iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST-TS CLC/TS 61482-1:2004

(Main)

Live working - Flame-resistant materials for clothing for thermal protection of workers - Thermal hazards of an electric arc -- Part 1: Test methods

Live working - Flame-resistant materials for clothing for thermal protection of workers - Thermal hazards of an electric arc -- Part 1: Test methods

Specifies test methods to measure the arc thermal performance value of materials intended for use in heat- and flame-resistant clothing for workers exposed to electric arcs.

Arbeiten unter Spannung - Flammwidriges Material für thermische Schutzkleidung - Wärmefluss des elektrischen Lichtbogens -- Teil 1: Prüfverfahren

Travaux sous tension - Matériaux résistant à la flamme pour vêtements de protection thermique des travailleurs - Risques d'arc électrique à effet thermique -- Partie 1: Méthodes d'essai

Spécifie les méthodes d'essai pour mesurer la valeur de performance thermique d'arc des matériaux destinés à être utilisés pour les vêtements résistant à la chaleur et à la flamme, pour les travailleurs exposés aux arcs électriques.

Delo pod napetostjo - Negorljivi materali za oblačila za toplotno zaščito delavcev - Temperaturne nevarnosti električnega obloka - 1. del: Preskusne metode (IEC 61482-1:2002)

General Information

Status
Withdrawn
Publication Date
31-Jan-2004
Withdrawal Date
23-Nov-2022
ICS
13.260 - Protection against electric shock. Live working
13.340.10 - Protective clothing
Technical Committee
DPN - Live Working
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
24-Nov-2022
Due Date
17-Dec-2022
Completion Date
24-Nov-2022
Ref Project
CLC/TS 61482-1:2003 - Live working - Flame-resistant materials for clothing for thermal protection of workers - Thermal hazards of an electric arc - Part 1: Test methods

Relations

Revised
SIST EN 61482-1-1:2009 - Live working - Protective clothing against the thermal hazards of an electric arc -- Part 1-1: Test methods - Method 1 - Determination of the arc rating (ATPV or EBT50) of flame resistant materials for clothing
Effective Date
05-Jun-2012
Replaced By
SIST EN 61482-1-1:2009 - Live working - Protective clothing against the thermal hazards of an electric arc -- Part 1-1: Test methods - Method 1 - Determination of the arc rating (ATPV or EBT50) of flame resistant materials for clothing
Effective Date
28-Jan-2023
Replaced By
SIST EN 61482-1-1:2009 - Live working - Protective clothing against the thermal hazards of an electric arc -- Part 1-1: Test methods - Method 1 - Determination of the arc rating (ATPV or EBT50) of flame resistant materials for clothing
Effective Date
01-Jun-2012

Buy Standard

TS CLC/TS 61482-1:2004TS CLC/TS 61482-1:2004
PreviousNext
Technical specification
TS CLC/TS 61482-1:2004
English language
40 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CLC/TS 61482-1:2004
01-februar-2004
'HORSRGQDSHWRVWMR1HJRUOMLYLPDWHUDOL]DREODþLOD]DWRSORWQR]DãþLWRGHODYFHY
7HPSHUDWXUQHQHYDUQRVWLHOHNWULþQHJDREORNDGHO3UHVNXVQHPHWRGH ,(&

Live working - Flame-resistant materials for clothing for thermal protection of workers -
Thermal hazards of an electric arc -- Part 1: Test methods
Arbeiten unter Spannung - Flammwidriges Material für thermische Schutzkleidung -
Wärmefluss des elektrischen Lichtbogens -- Teil 1: Prüfverfahren
Travaux sous tension - Matériaux résistant à la flamme pour vêtements de protection
thermique des travailleurs - Risques d'arc électrique à effet thermique -- Partie 1:
Méthodes d'essai
Ta slovenski standard je istoveten z: CLC/TS 61482-1:2003
ICS:
13.260 9DUVWYRSUHGHOHNWULþQLP Protection against electric
XGDURP'HORSRGQDSHWRVWMR shock. Live working
13.340.10 Varovalna obleka Protective clothing
SIST-TS CLC/TS 61482-1:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS CLC/TS 61482-1:2004

---------------------- Page: 2 ----------------------

SIST-TS CLC/TS 61482-1:2004

---------------------- Page: 3 ----------------------

SIST-TS CLC/TS 61482-1:2004

---------------------- Page: 4 ----------------------

SIST-TS CLC/TS 61482-1:2004

---------------------- Page: 5 ----------------------

SIST-TS CLC/TS 61482-1:2004

---------------------- Page: 6 ----------------------

SIST-TS CLC/TS 61482-1:2004

---------------------- Page: 7 ----------------------

SIST-TS CLC/TS 61482-1:2004

---------------------- Page: 8 ----------------------

SIST-TS CLC/TS 61482-1:2004

---------------------- Page: 9 ----------------------

SIST-TS CLC/TS 61482-1:2004

---------------------- Page: 10 ----------------------

SIST-TS CLC/TS 61482-1:2004

---------------------- Page: 11 ----------------------

SIST-TS CLC/TS 61482-1:2004

---------------------- Page: 12 ----------------------

SIST-TS CLC/TS 61482-1:2004

---------------------- Page: 13 ----------------------

SIST-TS CLC/TS 61482-1:2004

---------------------- Page: 14 ----------------------

SIST-TS CLC/TS 61482-1:2004

---------------------- Page: 15 ----------------------

SIST-TS CLC/TS 61482-1:2004

---------------------- P
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 60895:2020(Main)
Live working - Conductive clothing
EN IEC 60895:2020

This document is applicable to conductive clothing, worn during live working (especially barehand
working) on AC and DC electrical installations, to provide electrical continuity between all
parts of the clothing and a reduction of electric field inside the clothing.
This document is applicable to conductive clothing assembled from a conductive garment
(jackets and trousers or coveralls forming a one-piece garment) and from conductive component
parts (gloves, hoods or helmets, shoes or boots, overshoe socks and socks) in electrical
systems with nominal voltage up to 1 000 kV AC and up to ±800 kV DC.
This document does not indicate values of protection from the effects of the electric arc,
because any value indicated would not guarantee the necessary protection from the effects of
electric arcs, or the operator would need to wear very heavy and rigid conductive clothing, which
would not allow the execution of the work in safety.
The products designed and manufactured according to this document contribute to the safety
of the users provided they are used by persons trained for the work, in accordance with the live
working methods and the instructions for use.

  • Standard
    72 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61482-2:2020(Main)
Live working - Protective clothing against the thermal hazards of an electric arc - Part 2: Requirements
EN 61482-2:2020

IEC 61482-2 is applicable to protective clothing used in work where there is the risk of exposure to an electric arc hazard. This document specifies requirements and test methods applicable to materials and garments for protective clothing for electrical workers against the thermal hazards of an electric arc. Electric shock hazard is not covered by this document, which is applicable in combination with standards covering such hazards. Other effects than the thermal effects of an electric arc like noise, light emissions, pressure rise, hot oil, electric shock, the consequences of physical and mental shock or toxic influences are not covered by this document. Protection of eyes, face, head, hands and feet against electric arc hazard is not covered by this document.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61482-1-1:2019(Main)
Live working - Protective clothing against the thermal hazards of an electric arc - Part 1-1: Test methods - Method 1: Determination of the arc rating (ELIM, ATPV and/or EBT) of clothing materials and of protective clothing using an open arc
EN IEC 61482-1-1:2019

This document specifies test method procedures to determine the arc rating of flame resistant clothing materials and garments or assemblies of garments intended for use in clothing for workers if there is an electric arc hazard. An open arc under controlled laboratory conditions is used to determine the values of ELIM, ATPV or EBT of materials, garments or assemblies of garments. Other effects than the thermal effects of an electric arc like noise, light emissions, pressure rise, hot oil, electric shock, the consequences of physical and mental shock or toxic influences are not covered by this document. Protective clothing for work intentionally using an electric arc, e.g. arc welding, plasma torch, is not covered by this document.

  • Standard
    67 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61482-1-2:2015(Main)
Live working - Protective clothing against the thermal hazards of an electric arc - Part 1-2: Test methods - Method 2: Determination of arc protection class of material and clothing by using a constrained and directed arc (box test)
EN 61482-1-2:2014

This part of IEC 61482 specifies procedures to test material and garments intended for use in
heat and flame-resistant clothing for workers if there is an electric arc hazard. A directed and
constrained electric arc in a test circuit is used to classify material and clothing in two defined
arc protection classes.
This International Standard is not dedicated toward measuring the arc rating values (ATPV1,
ELIM2 or EBT3). Procedures determining these arc rating values are prescribed in
IEC 61482-1-1, using an open arc for testing.
Other effects than the thermal effects of an electric arc like noise, light emissions, pressure
rise, hot oil, electric shock, the consequences of physical and mental shock or toxic
influences are not covered by this standard.
Protective clothing for work intentionally using an electric arc, e.g. arc welding, plasma torch,
is not covered by this standard.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60984:2000/A1:2003(Amendment)
Sleeves of insulating material for live working
EN 60984:1992/A1:2002

EN following parallel vote

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50286:2000(Main)
Electrical insulating protective clothing for low-voltage installations
EN 50286:1999

This standard is applicable to electrical insulating protective clothing used by skilled persons when they are working on or near live parts of low voltage installations at nominal voltages up to 500 V a.c. or 750 V d.c. The purpose of this clothing when used in conjunction with other PPE, such as boots and gloves etc., is to prevent dangerous current from passing through persons when there is a risk of unintentional contact with several live parts located in and around the working area. Where the risk of unintentional contact with live parts is restricted e.g. with live parts in front of the worker, the wearing of this clothing is not essential. NOTE: Some restrictions on the use of this clothing may exist in areas with hot climatic conditions, for example.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60984:2000(Main)
Sleeves of insulating material for live working
EN 60984:1992

Applies to insulating sleeves for the protection of workers from accidental contact with live electrical conductors, apparatus or circuits.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60984:2000/A11:2000(Amendment)
Sleeves of insulating material for live working
EN 60984:1992/A11:1997
  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 50286:2020(Main)
Electrical insulating protective clothing for low-voltage installations
FprEN 50286:2022

This document is applicable to electrical insulating protective clothing used by skilled persons when they are working on or near live parts of Iow-voltage installations at nominal voltages up to 500 V AC or 750 V DC.
The purpose of this clothing when used in conjunction with other PPE, such as boots and gloves etc., is to prevent dangerous current from passing through persons when there is a risk of unintentional contact with several live parts located in and around the working area. Where the risk of unintentional contact with live parts is restricted e.g. with live parts in front of the worker, the wearing of this clothing is not essential.
The products designed and manufactured according to this document contribute to the safety of the users provided they are used by skilled persons, in accordance with safe methods of work and the instructions for use.
NOTE   Some restrictions on the use of this clothing can exist in areas with hot climatic conditions.

  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60895:2020(Main)
Live working - Conductive clothing
EN IEC 60895:2020

This document is applicable to conductive clothing, worn during live working (especially barehand
working) on AC and DC electrical installations, to provide electrical continuity between all
parts of the clothing and a reduction of electric field inside the clothing.
This document is applicable to conductive clothing assembled from a conductive garment
(jackets and trousers or coveralls forming a one-piece garment) and from conductive component
parts (gloves, hoods or helmets, shoes or boots, overshoe socks and socks) in electrical
systems with nominal voltage up to 1 000 kV AC and up to ±800 kV DC.
This document does not indicate values of protection from the effects of the electric arc,
because any value indicated would not guarantee the necessary protection from the effects of
electric arcs, or the operator would need to wear very heavy and rigid conductive clothing, which
would not allow the execution of the work in safety.
The products designed and manufactured according to this document contribute to the safety
of the users provided they are used by persons trained for the work, in accordance with the live
working methods and the instructions for use.

  • Standard
    72 pages
    English language
    sale 10% off
    e-Library read for
    1 day