SIST EN 1281-2:2000

Anaesthetic and respiratory equipment - Conical connectors - Part 2: Screw-threaded weight-bearing connectors (ISO 5356-2:1987 modified)

This part of EN 1282 specifies requirements for tracheostomy tubes made of plastics materials/and or rubber having inside diameter of 6,5 mm or greater. Such tubes are primarily designed for patients who require anaesthesia, artificial ventilation or other respiratory support, but need not be restricted to these uses. This standard does not apply to specialized tubes.

Anästhesie- und Beatmungsgeräte - Konische Konnektoren - Teil 2: Gewichtstragende konische Konnektoren mit Schraubgewinde (ISO 5356-2:1987 geändert)

Matériel respiratoire et d'anesthésie - Raccords coniques - Partie 2: Raccords a vis pouvant supporter un certain poids (ISO 5356-2:1987 modifiée)

Anestezijska in dihalna oprema - Stožčasti priključki - 2. del: Nosilni priključki z navojem (ISO 5356-2:1987, spremenjen)

General Information

• Status: Withdrawn
• Publication Date: 31-Dec-1999
• Withdrawal Date: 26-Aug-2007
• ICS: 11.040.10 - Anaesthetic, respiratory and reanimation equipment
• Technical Committee: VAZ - Healthcare
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 27-Aug-2007
• Due Date: 19-Sep-2007
• Completion Date: 27-Aug-2007
• Directive: 93/42/EEC - Council Directive 93/42/EEC of 14 June 1993 concerning medical devices
• Mandate: M/023 - Standardization mandate to CEN/CENELEC concerning the development of European standards relating to medical devices
• Ref Project: EN 1281-2:1995 - Anaesthetic and respiratory equipment - Conical connectors - Part 2: Screw-threaded weight-bearing connectors (ISO 5356-2:1987 modified)

Relations

• Replaced By: SIST EN ISO 5356-2:2007 - Anaesthetic and respiratory equipment - Conical connectors - Part 2: Screw-threaded weight-bearing connectors (ISO 5356-2:2006)
• Effective Date: 01-Oct-2007

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Anästhesie- und Beatmungsgeräte - Konische Konnektoren - Teil 2: Gewichtstragende konische Konnektoren mit Schraubgewinde (ISO 5356-2:1987 geändert)Matériel respiratoire et d'anesthésie - Raccords coniques - Partie 2: Raccords a vis pouvant supporter un certain poids (ISO 5356-2:1987 modifiée)Anaesthetic and respiratory equipment - Conical connectors - Part 2: Screw-threaded weight-bearing connectors (ISO 5356-2:1987 modified)11.040.10Anestezijska, respiratorna in reanimacijska opremaAnaesthetic, respiratory and reanimation equipmentICS:Ta slovenski standard je istoveten z:EN 1281-2:1995SIST EN 1281-2:2000en01-januar-2000SIST EN 1281-2:2000SLOVENSKI
STANDARD



SIST EN 1281-2:2000



SIST EN 1281-2:2000



SIST EN 1281-2:2000



SIST EN 1281-2:2000



SIST EN 1281-2:2000



INTERNATIONAL STANDARD INTERNATIONAL ORGANIZATION FOR STANDARDIZATION ORGANISATION INTERNATIONALE DE NORMALISATION MEXAYHAPOflHAR OPrAHI43AlJVlfl fl0 CTAHfiAPTM3A~MM Anaesthetic and respiratory equipment - Conical connectors - Part 2 : Screw-threaded weight-bearing connectors Ma t&iel respira toke et d’anesth&ie - Ratcords coniques - Partie 2 : Ratcords a vis pouvant supporter un certain poids ISO 5356-2 First edition 1987-07-15 Reference number ISO 5356-2 : 1987 (E) SIST EN 1281-2:2000



Foreword . ISO (the International Organization for Standardization) is a worldwide federation of national Standards bodies (ISO member bedies). The work of preparing International Standards is normally carried out through ISO technical committees. Esch member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, govern- mental and non-governmental, in liaison with ISO, also take part in the work. Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. They are approved in accordance with ISO procedures requiring at least 75 % approval by the member bodies voting. International Standard ISO 5356-2 was prepared by Technical Committee ISO/TC 121, Anaesthetic and respira tory equipmen t. Users should note that all International Standards undergo revision from time to time and that any reference made herein to any other International Standard implies its latest edition, unless otherwise stated. 0 International Organkation for Standardkation, 1987 Printed in Switzerland SIST EN 1281-2:2000



INTERNATIONAL STANDARD ISO 5356-2 : 1987 (E) Anaesthetic and respiratory equipment - Conical connectors - Part 2 : Screw-threaded weight-bearing connectors 0 Introduction 0.1 ISO 5356 comprises the following two Parts : Part 1 : Cones and sockets. Part 2 : Screw-threaded weight-bearing connectors. 0.2 While the conical connectors specified in ISO 5356-1 are satisfactory for lightweight breathing attachments, there is also a need for more substantial connectors to support heavy or fragile components. Factors governing the design of these con- nectors include robustness, simplicity, ease of sterilization, and ease of engagement and disengagement by hand. They should also be compatible with connectors meeting the requirements laid down in ISO 5356-1 and should, if possible, eliminate the likelihood of inadvertent misconnection, although it has to re- main the responsibility of the user to check that any System in which they are used is correctly assembled before use. Screw-threaded weight-bearing connectors specified in this part of ISO 5356 may be used for a
...