SIST EN 13126-5:2012/kFprA1:2014
(Amendment)Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 5: Devices that restrict the opening of windows and door height windows
Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 5: Devices that restrict the opening of windows and door height windows
This Part of EN 13126 specifies requirements and test methods for durability, strength, security and functionality of devices that restrict the opening of windows and door height windows.
On devices that restrict the opening of
- Tilt&Turn, Tilt-First, Turn-Only, or Tilt-Only windows and door-height windows
- horizontal and vertical pivot windows and door height windows
- side-hung Casements and top-hung windows and door height windows (opening outwards)
this part of EN 13126 only applies, if a restriction of the opening occurs within the specification in Annex A, E or G of EN 1191:2012 in accordance with the intended use specified by the manufacturer.
Baubeschläge - Beschläge für Fenster und Fenstertüren - Anforderungen und Prüfverfahren - Teil 5: Vorrichtungen zur Begrenzung des Öffnungswinkels von Fenstern
Quincaillerie pour le bâtiment - Exigences et méthodes d'essai des ferrures de fenêtres et portes-fenêtres - Partie 5: Dispositifs limiteurs d’ouverture des fenêtres et portes-fenêtres
Stavbno okovje - Okovje za okna in zastekljena vrata - Zahteve in preskusne metode - 5. del: Naprave, ki preprečujejo odpiranje oken in zastekljenih vrat
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 13126-5:2012/kFprA1:2014
01-maj-2014
6WDYEQRRNRYMH2NRYMH]DRNQDLQ]DVWHNOMHQDYUDWD=DKWHYHLQSUHVNXVQH
PHWRGHGHO1DSUDYHNLSUHSUHþXMHMRRGSLUDQMHRNHQLQ]DVWHNOMHQLKYUDW
Building hardware - Hardware for windows and door height windows - Requirements and
test methods - Part 5: Devices that restrict the opening of windows and door height
windows
Baubeschläge - Beschläge für Fenster und Fenstertüren - Anforderungen und
Prüfverfahren - Teil 5: Vorrichtungen zur Begrenzung des Öffnungswinkels von Fenstern
Quincaillerie pour le bâtiment - Exigences et méthodes d'essai des ferrures de fenêtres
et portes-fenêtres - Partie 5: Dispositifs limiteurs d’ouverture des fenêtres et portes-
fenêtres
Ta slovenski standard je istoveten z: EN 13126-5:2011/FprA1:2014
ICS:
91.190 Stavbna oprema Building accessories
SIST EN 13126-5:2012/kFprA1:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 13126-5:2012/kFprA1:2014
---------------------- Page: 2 ----------------------
SIST EN 13126-5:2012/kFprA1:2014
EUROPEAN STANDARD
FINAL DRAFT
EN 13126-5:2011
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
March 2014
ICS 91.190
English Version
Building hardware - Hardware for windows and door height
windows - Requirements and test methods - Part 5: Devices that
restrict the opening of windows and door height windows
Quincaillerie pour le bâtiment - Exigences et méthodes Baubeschläge - Beschläge für Fenster und Fenstertüren -
d'essai des ferrures de fenêtres et portes-fenêtres - Partie Anforderungen und Prüfverfahren - Teil 5: Vorrichtungen
5: Dispositifs limiteurs d'ouverture des fenêtres et portes- zur Begrenzung des Öffnungswinkels von Fenstern
fenêtres
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 33.
This draft amendment A1, if approved, will modify the European Standard EN 13126-5:2011. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change w
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.