SIST-TS TS 101 804-3 V1.1.1:2004

• Abstract:

  Design of Abstract Test Suite and PIXIT for H.225.0 protocol implementation in Terminal, Gatekeeper and Gateway.

• Status: Published
• Publication Date: 31-Mar-2004
• ICS: 33.020 - Telecommunications in general
• Technical Committee: SPN - Services and Protocols for Networks
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Apr-2004
• Due Date: 01-Apr-2004
• Completion Date: 01-Apr-2004
• Ref Project: ETSI TS 101 804-3 V1.1.1 (2002-02) - Telecommunications and Internet Protocol Harmonization Over Networks (TIPHON) Release 3; Technology compliance specifications; Part 3: H.225.0 conformance test specifications; Abstract Test Suite (ATS) and PIXIT proforma specification for Terminal, Gatekeeper and Gateway

SIST-TS TS 101 804-3 V1.1.1:2004 is the Slovenian version of the ETSI technical specification for TIPHON Release 3, Part 3. It specifies an Abstract Test Suite (ATS) and a partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma for H.225.0 conformance testing of Terminal, Gatekeeper and Gateway implementations. In practice, it tells test laboratories and implementers how H.225.0 behavior is to be tested and what implementation details must be supplied before testing.

What does SIST-TS TS 101 804-3 V1.1.1:2004 specify?

SIST-TS TS 101 804-3 V1.1.1:2004 specifies the ATS and partial PIXIT proforma for the H.225.0 protocol used by Terminal, Gatekeeper and Gateway equipment. It is aimed at conformance testing, so the document is about checking protocol behavior rather than defining the protocol itself.

The scope says the objective is to provide conformance tests that improve the probability of interoperability. It covers procedures described in ITU-T Recommendation H.323 and ITU-T Recommendation H.225.0, and it bases the test methodology on ISO/IEC 9646-1, -2 and -3.

The document is organized as follows:

Part	What it covers
Clause 1	Scope
Clause 2	References
Clause 3	Definitions and abbreviations
Clause 4	Abstract Test Method
Clause 5	ATS conventions and the TTCN version used
Clause 6	ATS to TP map
Clause 7	PCTR conformance
Clause 8	PIXIT conformance
Clause 9	ATS conformance
Annex A	Protocol Conformance Test Report (PCTR) proforma
Annex B	Partial PIXIT proforma
Annex C	Abstract Test Suite (ATS)
Annex D	Bibliography

What are the key requirements of SIST-TS TS 101 804-3 V1.1.1:2004?

SIST-TS TS 101 804-3 V1.1.1:2004 sets out how the ATS is applied, how test reports are structured, and what information must be provided before execution of conformance tests. The practical focus is on making sure the tester, laboratory and equipment under test use the same assumptions and the same test control data.

Test method and ATS structure

Clause 4 applies the remote test method. The figure in that clause shows the tester interacting with the IUT through the service provider layers, with a Point of Control and Observation (PCO) above the transport layer. In practice, this means the tests observe protocol behavior across the network interface rather than inside the implementation.

Clause 5 states that the TTCN version used is the one defined in ETSI TR 101 666. For users of the ATS, this fixes the notation used for the test suite.

Clause 6 says the test purpose identifiers are reused as test case names, giving a one-to-one ATS to TP map. This makes it easier to trace each executable test back to its intended behavior.

PCTR and PIXIT conformance

Clause 7 requires a test laboratory that produces a Protocol Conformance Test Report (PCTR) to follow the ISO/IEC 9646-5 template, and to use the Annex A proforma when reporting tests for the ATS in Annex C. In practice, the report has to preserve the annex structure so results are comparable.

Clause 8 requires an augmented partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma for the ATS in Annex C, and says it must be technically equivalent to Annex B. The PIXIT collects the implementation details that the lab needs before running tests, such as ports, addresses, timers and configuration choices.

ATS conformance and realization

Clause 9 requires the test realizer to comply with ISO/IEC 9646-4 when producing the Means Of Testing (MOT) and Executable Test Suite (ETS). The ETS must be technically equivalent to the ATS in Annex C, and every abstract test event sequence must be realizable in executable form. That matters because a test suite is only useful if the lab can actually run it.

The same clause also says a laboratory offering conformance test services with this ATS must comply with ISO/IEC 9646-5, and it must use an MOT that conforms to the ATS. This ties the written test suite to the way it is deployed in a real lab.

What the annex proformas ask for

Annex A structures the PCTR around identification, IUT status, static and dynamic conformance summaries, the test campaign report and observations. Annex B structures the PIXIT around the test laboratory, the client, the system under test, and detailed protocol information.

Annex B is especially practical for H.225.0 testing because it asks for:

• IP ports and addresses for tester and IUT
• gatekeeper identifiers, transport addresses and endpoint identifiers
• bandwidth-related values
• RAS timers
• configuration details for RAS and basic call control testing
• H.323/H.225.0 message and information element values

That means the implementation provider must prepare the exact network and signaling parameters needed for repeatable testing.

What terms does SIST-TS TS 101 804-3 V1.1.1:2004 define?

• ATS (Abstract Test Suite) - The abstract set of test cases and test behavior used as the basis for conformance testing.
• PIXIT (Protocol Implementation eXtra Information for Testing) - The implementation-specific information that the test laboratory needs to set up and run the tests.
• PCTR (Protocol Conformance Test Report) - The report form used to record the results and status of conformance testing.
• IUT (Implementation Under Test) - The protocol implementation being assessed.
• SUT (System Under Test) - The system or equipment configuration being tested, including the relevant implementation and environment.
• RAS (Registration, Admission and Status) - The H.225.0 signaling area covering discovery, registration, admission, status and related procedures.
• BCC (Basic Call Control) - The signaling protocol associated with DSS1 / ISDN basic call control procedures.
• TTCN (Testing and Test Control Notation) - The formal notation used to write the abstract test suite.

Who uses SIST-TS TS 101 804-3 V1.1.1:2004?

SIST-TS TS 101 804-3 V1.1.1:2004 is used by test laboratories, test realizers, equipment vendors and their customers in H.323 / TIPHON-related telecommunications testing. The document is written for people who need to prepare, execute or evaluate H.225.0 conformance testing.

Typical users include:

• test laboratories producing PCTR documents and running conformance campaigns
• test realizers building the MOT and ETS from the ATS
• vendors of Terminal, Gatekeeper and Gateway equipment
• clients of test laboratories who provide PIXIT data and receive reports
• quality managers and buyers who need evidence that an implementation has been assessed against the specified test suite

Which standards are used with SIST-TS TS 101 804-3 V1.1.1:2004?

SIST-TS TS 101 804-3 V1.1.1:2004 is used together with the following referenced standards and documents:

• ETSI TS 101 804-1 - provides the PICS proforma for H.225.0 Terminal, Gatekeeper and Gateway implementations.
• ETSI TS 101 804-2 - provides the Test Suite Structure and Test Purposes that the ATS in this part realizes.
• ITU-T Recommendation H.323 - provides the framework and wire protocol context for multiplexed call signaling transport.
• ITU-T Recommendation H.225.0 - provides the protocol under test: call signaling and media stream packetization for packet-based multimedia communication systems.
• ITU-T Recommendation Q.931 - supports the basic call control procedures referenced by BCC.
• ISO/IEC 9646-1, -2, -3 - provide the conformance testing methodology, ATS specification framework and TTCN notation basis.
• ISO/IEC 9646-4 - provides requirements for test realization and executable test suites.
• ISO/IEC 9646-5 - provides requirements for test laboratories and clients in the conformance assessment process.
• ETSI TR 101 666 - defines the TTCN version used for this ATS.

What does the SIST-TS TS 101 804-3 V1.1.1:2004 document contain?

The document contains the abstract test method, the ATS conventions, the ATS-to-test-purpose mapping, and the conformance rules for PCTR, PIXIT and ATS use. Annex A gives the PCTR proforma, including static and dynamic conformance summaries and the test campaign report structure.

Annex B contains the partial PIXIT proforma with detailed tables for ports, addresses, identifiers, bandwidth values, timers and configuration options for both RAS and basic call control testing. These tables are used to configure the tester and the IUT before the test run.

Annex C contains the ATS in two equivalent forms: TTCN.GR and TTCN.MP. The annex notes that both forms are considered equivalent, which matters for test tooling and exchange of the suite between users.

SLOVENSKI STANDARD
01-april-2004
Harmonizacija telekomunikacij in internetnega protokola prek omrežij (TIPHON), 3.
izdaja - Specifikacija tehnološke ustreznosti - 3. del: Specifikacija za preskušanje
skladnosti H.225.0 - Abstraktni preskušalni niz (ATS) in PIXIT - Proforma
specifikacija za terminal, vratarja in prehod
Telecommunications and Internet Protocol Harmonization Over Networks (TIPHON)
Release 3; Technology compliance specifications; Part 3: H.225.0 conformance test
specifications; Abstract Test Suite (ATS) and PIXIT proforma specification for Terminal,
Gatekeeper and Gateway
Ta slovenski standard je istoveten z: TS 101 804-3 Version 1.1.1
ICS:
33.020 Telekomunikacije na splošno Telecommunications in
general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

Technical Specification
Telecommunications and Internet Protocol
Harmonization Over Networks (TIPHON) Release 3;
Technology compliance specifications;
Part 3: H.225.0 conformance test specifications;
Abstract Test Suite (ATS) and PIXIT proforma specification
for Terminal, Gatekeeper and Gateway

�
2 ETSI TS 101 804-3 V1.1.1 (2002-02)

Reference
DTS/TIPHON-06016-3
Keywords
ATS, gatekeeper, gateway, H.323, IP, PIXIT,
supplementary service, terminal, testing, TTCN,
VoIP
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, send your comment to:
[e-mail]
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2001.
All rights reserved.
ETSI
3 ETSI TS 101 804-3 V1.1.1 (2002-02)
Contents
Intellectual Property Rights.5
Foreword.5
1 Scope.6
2 References.6
3 Definitions and abbreviations.7
3.1 Definitions.7
3.2 Abbreviations.7
4 Abstract Test Method.8
5 ATS conventions.8
5.1 Version of TTCN used .8
6 ATS to TP map.8
7 PCTR conformance.8
8 PIXIT conformance.9
9 ATS conformance.9
Annex A (normative): Protocol Conformance Test Report (PCTR) proforma.10
A.1 Identification summary.10
A.1.1 Protocol conformance test report.10
A.1.2 IUT identification.10
A.1.3 Testing environment.11
A.1.4 Limits and reservations .11
A.1.5 Comments.11
A.2 IUT conformance status .11
A.3 Static conformance summary.11
A.4 Dynamic conformance summary.12
A.5 Static conformance review report.12
A.6 Test campaign report.13
A.7 Observations.21
Annex B (normative): Partial PIXIT proforma .22
B.1 Identification summary.22
B.2 Abstract test suite summary .22
B.3 Test laboratory.22
B.4 Client (of the test laboratory) .23
B.5 System Under Test (SUT) .23
B.6 Protocol information.24
B.6.1 Protocol identification.24
B.6.2 Configuration to be tested .24
B.6.3 Parameters for RAS testing .24
B.6.3.1 IP port and address information.24
B.6.3.2 Addresses and identifiers .25
B.6.3.3 Bandwidth information.26
B.6.3.4 RAS timers.26
ETSI
4 ETSI TS 101 804-3 V1.1.1 (2002-02)
B.6.3.5 RAS configuration details.27
B.6.4 Parameters for basic call control testing.27
B.6.4.1 IP port and address information.27
B.6.4.2 Basic call control configuration details.27
B.6.4.3 Information element values.28
B.6.4.4 UUIE parameter values.28
B.6.5 Test management timers .29
Annex C (normative): Abstract Test Suite (ATS) .30
C.1 The TTCN Graphical form (TTCN.GR) .30
C.2 The TTCN Machine Processable form (TTCN.MP).30
Annex D (informative): Bibliography.31
History .32

ETSI
5 ETSI TS 101 804-3 V1.1.1 (2002-02)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Technical Specification (TS) has been produced by ETSI Project Telecommunications and Internet Protocol
Harmonization Over Networks (TIPHON).
The present document is part 3 of a multi-part deliverable covering the H225.0 protocol for Terminal, Gatekeeper and
Gateway as identified below:
Part 1: "Revision/update of H.225.0 Protocol Implentation Conformance Statement (PICS) proforma
specification for Terminal, Gatekeeper and Gateway";
Part 2: "H.225.0 conformance test specifications; Test Suite Structure and Test Purposes (TSS&TP) specification
for Terminal, Gatekeeper and Gateway";
Part 3: "H.225.0 conformance test specifications; Abstract Test Suite (ATS) and PIXIT proforma
specification for Terminal, Gatekeeper and Gateway".
ETSI
6 ETSI TS 101 804-3 V1.1.1 (2002-02)
1 Scope
The present document specifies the Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information
for Testing (PIXIT) proforma for the H225.0 protocol for Terminal, Gatekeeper and Gateway.
The objective of the present document is to provide conformance tests that give a greater probability of
inter-operability. The ATS & PIXIT specification covers the procedures described in
ITU-T Recommendation H.323 [3] and ITU-T Recommendation H.225.0 [4].
The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [6], ISO/IEC 9646-2 [7] and
ISO/IEC 9646-3 [8]) is used as basis for the test methodology.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
[1] ETSI TS 101 804-1: "Telecommunications and Internet protocol Harmonization Over Networks
(TIPHON) Release 3; Release PICS; Revision/Update of H.225.0 PICS for Terminal, Gatekeeper
and Gateway".
[2] ETSI TS 101 804-2: "Telecommunications and Internet protocol Harmonization Over Networks
(TIPHON) Release 3; Technology Compliance Specifications; H.225.0 Conformance Test
Specifications; Test Suite Structure and Test Purposes (TSS&TP) for Terminal, Gatekeeper and
Gateway".
[3] ITU-T Recommendation H.323 (2000): "Framework and wire-protocol for multiplexed call
signalling transport".
[4] ITU-T Recommendation H.225.0 (2000): "Call signalling protocols and media stream
packetization for packet-based multimedia communication systems".
[5] ITU-T Recommendation Q.931: "ISDN user-network interface layer 3 specification for basic call
control".
[6] ISO/IEC 9646-1: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 1: General concepts".
[7] ISO/IEC 9646-2: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 2: Abstract Test Suite specification".
[8] ISO/IEC 9646-3: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 3: The Tree and Tabular Combined Notation (TTCN)".
[9] ISO/IEC 9646-4: "Information technology -- Open Systems Interconnection -- Conformance
testing methodology and framework -- Part 4: Test realization".
[10] ISO/IEC 9646-5: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 5: Requirements on test laboratories and clients for the
conformance assessment process".
[11] ETSI TR 101 666: "Information technology; Open Systems Interconnection Conformance testing
methodology and framework; The Tree and Tabular Combined Notation (TTCN) (Ed. 2++)".
ETSI
7 ETSI TS 101 804-3 V1.1.1 (2002-02)
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions defined in ITU-T Recommendation H.323 [3], in
ITU-T Recommendation H.225.0 [4], ISO/IEC 9646-1 [6], ISO/IEC 9646-2 [7] and ISO/IEC 9646-3 [8], and the
following apply:
Basic Call Control (BCC): signalling protocol associated with the DSS1 - ISDN Basic Call control procedures of ITU-
T Recommendation Q.931
inopportune: test purpose covering a signalling procedure where an inopportune message (type of message not
expected in the IUT current state) is sent to the IUT
syntactically invalid: test purpose covering a signalling procedure where a valid (expected in the current status of the
IUT) but not correctly encoded (unknown or incorrect parameter values) message is sent to the IUT, which shall react
correctly and eventually reject the message
valid: test purpose covering a signalling procedure where all the messages sent to or received from the IUT are valid
(expected in the current status of the IUT) and correctly encoded
3.2 Abbreviations
For the purposes of the present document, the following abbreviations apply:
ATS Abstract Test Suite
BCC Basic Call Control
DGK Destination GateKeeper
DSS1 Digital Signalling System 1
GDR Gatekeeper Discovery Request
GK GateKeeper
GRQ Gatekeeper ReQuest
I Inopportune
IP Internet Protocol
ISDN Integrated Services Digital Network
IUT Implementation Under Test
MOT Mean Of Testing
MTC Main Test Component
PCTR Protocol Conformance Testing Report
PICS Protocol Implementation Conformance Statement
PIXIT Protocol Implementation eXtra Information for Testing
PTC Parallel Test Component
RAS Registration, Admission and Status
REG REGistration
RRQ Register ReQuest
S Syntactically invalid
STA STAtus
SUT System Under Test
TCP Transmission Control Protocol
TE TErminal
TP Test Purpose
TSS Test Suite Structure
TTCN Testing and Test Control Notation
UDP User Datagram Protocol
URQ Unregistration ReQuest
UUIE User-User Information Element
V Valid
ETSI
8 ETSI TS 101 804-3 V1.1.1 (2002-02)
4 Abstract Test Method
The remote test method is applied for this ATS.
Tester
H.225.0
H.225.0
call
IUT
RAS
signalling
part
part
PCO T
L4 UDP TCP UDP/TCP
L3 Network layer: IP IP
L2 Link layer Link layer
L1 Physical layer Physical layer
Service provider
Figure 1: Remote test method with PCO T
A Point of Control and Observation (PCO) resides between the layer 4 and the tester, which executes the signalling
procedures corresponding to the test case dynamic behaviour. This PCO is named "T" because it is located above the
transport layer. The L PCO is used to control and observe the behaviour of the Implementation Under Test (IUT) using
the layers of the Service provider.
5 ATS conventions
5.1 Version of TTCN used
The version of TTCN used is that defined in TR 101 666 [11].
6 ATS to TP map
The identifiers used for the TPs are reused as test case names. Thus there is a straightforward one-to-one mapping.
7 PCTR conformance
A test laboratory, when requested by a client to produce a PCTR, is required, as specified in ISO/IEC 9646-5 [10], to
produce a PCTR conformant with the PCTR template given in annex B of ISO/IEC 9646-5 [10].
Furthermore, a test laboratory, offering testing for the ATS specification contained in annex C, when requested by a
client to produce a PCTR, is required to produce a PCTR conformant with the PCTR proforma contained in annex A.
A PCTR which conforms to this PCTR proforma specification shall preserve the content and ordering of the clauses
contained in annex A. Clause A.6 of the PCTR may contain additional columns. If included, these shall be placed to the
right of the existing columns. Text in italics may be retained by the test laboratory.
ETSI
9 ETSI TS 101 804-3 V1.1.1 (2002-02)
8 PIXIT conformance
A test realizer, producing an executable test suite for the ATS specification contained in annex C, is required, as
specified in ISO/IEC 9646-4 [9], to produce an augmented partial PIXIT proforma conformant with this partial PIXIT
proforma specification.
An augmented partial PIXIT proforma which conforms to this partial PIXIT proforma specification shall, as a
minimum, have contents which are technically equivalent to annex B. The augmented partial PIXIT proforma may
contain additional questions that need to be answered in order to prepare the Means Of Testing (MOT) for a particular
IUT.
A test laboratory, offering testing for the ATS specification contained in annex C, is required, as specified in
ISO/IEC 9646-5 [10], to further augment the augmented partial PIXIT proforma to produce a PIXIT proforma
conformant with this partial PIXIT proforma specification.
A PIXIT proforma which conforms to this partial PIXIT proforma specification shall, as a minimum, have contents
which are technically equivalent to annex B. The PIXIT proforma may contain additional questions that need to be
answered in order to prepare the test laboratory for a particular IUT.
9 ATS conformance
The test realizer, producing MOT and ETS for this ATS specification, shall comply with the requirements of
ISO/IEC 9646-4 [9]. In particular, these concern the realization of an ETS based on each ATS. The test realizer shall
provide a statement of conformance of the MOT to this ATS specification.
An ETS which conforms to this ATS specification shall contain test groups and test cases which are technically
equivalent to those contained in the ATS in annex C. All sequences of test events comprising an abstract test case shall
be capable of being realized in the executable test case. Any further checking which the test system might be capable of
performing is outside the scope of this ATS specification and shall not contribute to the verdict assignment for each test
case.
Test laboratories running conformance test services using this ATS shall comply with ISO/IEC 9646-5 [10].
A test laboratory which claims to conform to this ATS specification shall use an MOT which conforms to this ATS.
ETSI
10 ETSI TS 101 804-3 V1.1.1 (2002-02)
Annex A (normative):
Protocol Conformance Test Report (PCTR) proforma
Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that
users of the present document may freely reproduce the PCTR proforma in this annex so that it can be used for its
intended purposes and may further publish the completed PCTR.
A.1 Identification summary
A.1.1 Protocol conformance test report
PCTR number:
PCTR date:
Corresponding SCTR number:
Corresponding SCTR date:
Test laboratory identification:

Test laboratory manager:
Signature:
A.1.2 IUT identification
Name:
Version:
Protocol specification: ITU-T Recommendation H.225
PICS:
Previous PCTRs (if any):
ETSI
11 ETSI TS 101 804-3 V1.1.1 (2002-02)
A.1.3 Testing environment
PIXIT reference number:
ATS specification: TS 101 804-3
Abstract test method: Multi-party test method (see ISO/IEC 9646-2)
Means of testing identification:

Dates of testing:
Conformance log reference(s):
Retention date for log reference(s):

A.1.4 Limits and reservations
Additional information relevant to the technical contents or further use of the test report, or to the rights and
obligations of the test laboratory and the client, may be given here. Such information may include restriction on the
publication of the report.
.........................................................................................................................................................................................
.........................................................................................................................................................................................
.........................................................................................................................................................................................
.........................................................................................................................................................................................
A.1.5 Comments
Additional comments may be given by either the client or the test laboratory on any of the contents of the PCTR, for
example, to note disagreement between the two parties.
.........................................................................................................................................................................................
.........................................................................................................................................................................................
.........................................................................................................................................................................................
.........................................................................................................................................................................................
A.2 IUT conformance status
This IUT has/has not been shown by conformance assessment to be non-conforming to the specified protocol
specification.
Strike the appropriate words in this sentence. If the PICS for this IUT is consistent with the static conformance
requirements (as specified in clause A.3 of the present document) and there are no "FAIL" verdicts to be recorded (in
clause A.6) strike the words "has", otherwise strike the words "has not".
A.3 Static conformance summary
The PICS for this IUT is/is not consistent with the static conformance requirements in the specified protocol.
Strike the appropriate words in this sentence.
ETSI
12 ETSI TS 101 804-3 V1.1.1 (2002-02)
A.4 Dynamic conformance summary
The test campaign did/did not reveal errors in the IUT.
Strike the appropriate words in this sentence. If there are no "FAIL" verdicts to be recorded (in clause A.6 of the
present document) strike the word "did", otherwise strike the words "did not".
Summary of the results of groups of tests:
.........................................................................................................................................................................................
.........................................................................................................................................................................................
.........................................................................................................................................................................................
.........................................................................................................................................................................................
A.5 Static conformance review report
If clause A.3 indicates non-conformance, this clause itemizes the mismatches between the PICS and the static
conformance requirements of the specified protocol specification.
.........................................................................................................................................................................................
.........................................................................................................................................................................................
.........................................................................................................................................................................................
.........................................................................................................................................................................................
.........................................................................................................................................................................................
.........................................................................................................................................................................................
ETSI
13 ETSI TS 101 804-3 V1.1.1 (2002-02)
A.6 Test campaign report
ATS reference Selected? Run? Verdict Observations
(Y/N) (Y/N)
RAS testing - terminal
RAS_TE_GDR_001
RAS_TE_GDR_002
RAS_TE_GDR_003
RAS_TE_GDR_004
RAS_TE_GDR_005
RAS_TE_GDR_006
RAS_TE_GDR_007
RAS_TE_GDR_008
RAS_TE_GDR_009
RAS_TE_GDR_010
RAS_TE_REG_001
RAS_TE_REG_002
RAS_TE_REG_003
RAS_TE_REG_004
RAS_TE_REG_005
RAS_TE_REG_006
RAS_TE_REG_007
RAS_TE_REG_008
RAS_TE_REG_009
RAS_TE_REG_010
RAS_TE_REG_011
RAS_TE_REG_012
RAS_TE_REG_013
RAS_TE_REG_014
RAS_TE_REG_015
RAS_TE_REG_016
RAS_TE_ADM_001
RAS_TE_ADM_002
RAS_TE_ADM_003
RAS_TE_ADM_004
RAS_TE_ADM_005
RAS_TE_ADM_006
RAS_TE_ADM_007
RAS_TE_ADM_008
RAS_TE_ADM_009
RAS_TE_ADM_010
RAS_TE_ADM_011
RAS_TE_ADM_012
RAS_TE_ADM_013
RAS_TE_ADM_014
RAS_TE_ADM_015
RAS_TE_ADM_016
RAS_TE_LOC_001
RAS_TE_LOC_002
RAS_TE_LOC_003
RAS_TE_LOC_004
RAS_TE_LOC_005
RAS_TE_LOC_006
RAS_TE_LOC_007
RAS_TE_LOC_008
RAS_TE_LOC_009
RAS_TE_BND_001
RAS_TE_BND_002
RAS_TE_BND_003
RAS_TE_BND_004
RAS_TE_BND_005
RAS_TE_BND_006
RAS_TE_BND_007
ETSI
14 ETSI TS 101 804-3 V1.1.1 (2002-02)
ATS reference Selected? Run? Verdict Observations
(Y/N) (Y/N)
RAS_TE_BND_008
RAS_TE_BND_009
RAS_TE_URG_001
RAS_TE_URG_002
RAS_TE_URG_003
RAS_TE_URG_004
RAS_TE_URG_005
RAS_TE_URG_006
RAS_TE_URG_007
RAS_TE_URG_008
RAS_TE_URG_009
RAS_TE_URG_010
RAS_TE_DIS_001
RAS_TE_DIS_002
RAS_TE_DIS_003
RAS_TE_DIS_004
RAS_TE_DIS_005
RAS_TE_DIS_006
RAS_TE_DIS_007
RAS_TE_DIS_008
RAS_TE_DIS_009
RAS_TE_STA_001
RAS_TE_STA_002
RAS_TE_STA_003
RAS_TE_STA_004
RAS_TE_STA_005
RAS_TE_STA_006
RAS_TE_STA_007
RAS_TE_STA_008
RAS_TE_STA_009
RAS_TE_RIP_001
RAS_TE_RIP_002
RAS_TE_RIP_003
RAS_TE_RIP_004
RAS_TE_RIP_005
RAS_TE_RIP_006
RAS_TE_RIP_007
RAS_TE_RIP_008
RAS_TE_RIP_009
RAS_TE_RIP_010
RAS_TE_RIP_011
RAS_TE_RIP_012
RAS_TE_RIP_013
RAS_TE_RIP_014
RAS_TE_RIP_015
RAS_TE_RIP_016
RAS_TE_RIP_017
RAS_TE_RIP_018
RAS_TE_RIP_019
RAS_TE_RIP_020
RAS_TE_RIP_021
RAS_TE_RIP_022
RAS_TE_RIP_023
RAS_TE_RIP_024
RAS_TE_RIP_025
RAS_TE_RIP_026
RAS_TE_RIP_027
RAS_TE_RIP_028
RAS_TE_RIP_029
RAS_TE_RIP_030
RAS_TE_RIP_031
RAS_TE_RIP_032
ETSI
15 ETSI TS 101 804-3 V1.1.1 (2002-02)
ATS reference Selected? Run? Verdict Observations
(Y/N) (Y/N)
RAS testing - gatekeeper
RAS_GK_GDR_001
RAS_GK_GDR_002
RAS_GK_GDR_003
RAS_GK_GDR_004
RAS_GK_GDR_005
RAS_GK_GDR_006
RAS_GK_GDR_007
RAS_GK_GDR_008
RAS_GK_REG_001
RAS_GK_REG_002
RAS_GK_REG_003
RAS_GK_REG_004
RAS_GK_REG_005
RAS_GK_REG_006
RAS_GK_REG_007
RAS_GK_REG_008
RAS_GK_REG_009
RAS_GK_REG_010
RAS_GK_REG_011
RAS_GK_REG_012
RAS_GK_REG_013
RAS_GK_REG_016
RAS_GK_ADM_001
RAS_GK_ADM_002
RAS_GK_ADM_003
RAS_GK_ADM_004
...