SIST EN ISO 10477:2000/A1:2000

Dentistry - Polymer based crown and bridge materials (ISO 10477:1992/AM1:1998)

Zahnheilkunde - Kronen- und Brückenkunststoffe (ISO 10477:1992/AM1:1998)

Diese Internationale Norm gilt für Kronen- und Brückenkunststoffe, für die der Hersteller eine Haftung an der metallischen Substruktur ohne makro- mekanische Befestigung, wie Perlen oder Drähte, beansprucht. Sie gilt nicht für Prothesenkunststoffe und ihre Haftfähigkeit an Metall-Legierungen oder an Keramiken und ihre Verbindung mit Legierungen.

Art dentaire - Produits a base de polymere pour couronnes et ponts (ISO 10477:1992/AM1:1998)

NEW!IEC 62271-110:2017 est disponible sous forme de IEC 62271-110:2017 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.

L’IEC 62271-110:2017 est applicable aux appareils de connexion à courant alternatif conçus pour une installation à l'intérieur ou à l'extérieur, et pour fonctionner à des fréquences de 50 Hz à 60 Hz, sur des réseaux de tensions supérieures à 1 000 V, et prévus pour l’établissement et la coupure de courants inductifs. Le présent document est applicable aux appareils de connexion (y compris les disjoncteurs selon l’IEC 62271-100) qui sont utilisés pour l’établissement et la coupure de courants de moteurs à haute tension et de courants de bobines d'inductance shunt, et aussi aux contacteurs à haute tension utilisés pour l’établissement et la coupure de courants de moteurs à haute tension, tels que couverts par l’IEC 62271-106. Cette quatrième édition annule et remplace la troisième édition parue en 2012. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
- tous les appareils de connexion sont dorénavant couverts, et non uniquement les disjoncteurs;
- un nombre limité d’essais T10 ne couvrent plus les essais d’établissement et de coupure de courant de bobine d’inductance shunt en dessous de 52 kV;
- l’évaluation et la consignation d’une plage de coupure sans réallumage ont été ajoutées.

Dentistry - Polymer based crown and bridge materials (ISO 10477:1992/AM1:1998)

General Information

• Status: Withdrawn
• Publication Date: 31-Oct-2000
• Withdrawal Date: 30-Jun-2005
• ICS: 11.060.10 - Dental materials
• Technical Committee: VAZ - Healthcare
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 01-Jul-2005
• Due Date: 01-Jul-2005
• Completion Date: 01-Jul-2005
• Ref Project: EN ISO 10477:1996/A1:2000 - Dentistry - Polymer based crown and bridge materials (ISO 10477:1992/AM1:1998)

Relations

• Replaced By: SIST EN ISO 10477:2005 - Dentistry - Polymer-based crown and bridge materials (ISO 10477:2004)
• Effective Date: 01-Jul-2005
• Amends: SIST EN ISO 10477:2000 - Dentistry - Polymer based crown and bridge materials (ISO 10477:1992)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10477:2000/A1:2000
01-november-2000
Dentistry - Polymer based crown and bridge materials (ISO 10477:1992/AM1:1998)
Dentistry - Polymer based crown and bridge materials (ISO 10477:1992/AM1:1998)
Zahnheilkunde - Kronen- und Brückenkunststoffe (ISO 10477:1992/AM1:1998)
Art dentaire - Produits a base de polymere pour couronnes et ponts (ISO
10477:1992/AM1:1998)
Ta slovenski standard je istoveten z: EN ISO 10477:1996/A1:2000
ICS:
11.060.10 =RERWHKQLþQLPDWHULDOL Dental materials
SIST EN ISO 10477:2000/A1:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10477:2000/A1:2000

---------------------- Page: 2 ----------------------

SIST EN ISO 10477:2000/A1:2000

---------------------- Page: 3 ----------------------

SIST EN ISO 10477:2000/A1:2000

---------------------- Page: 4 ----------------------

SIST EN ISO 10477:2000/A1:2000
INTERNATIONAL ISO
STANDARD 10477
First edition
1992-12-15
AMENDMENT 1
1998-04-15
Dentistry — Polymer-based crown and
bridge materials
AMENDMENT 1
Art dentaire — Produits à base de polymère pour couronnes et ponts
AMENDEMENT 1
A
Reference number
ISO 10477:1992/Amd.1:1998(E)

---------------------- Page: 5 ----------------------

SIST EN ISO 10477:2000/A1:2000
ISO 10477:1992/Amd.1:1998(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national standards bodies (ISO member bodies). The work of
preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which
a technical committee has been established has the right to be represented
on that committee. International organizations, governmental and non-
governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
Amendment 1 to International Standard ISO 10477:1992 was prepared by
Technical Committee ISO/TC 106, Dentistry, Subcommittee SC 2,
Prosthodontic materials.
©  ISO 1998
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet [e-mail]
X.400 c=ch; a=400net; p=iso; o=isocs; s=central
Printed in Switzerland
ii

---------------------- Page: 6 ----------------------

SIST EN ISO 10477:2000/A1:2000
©
ISO ISO 10477:1992/Amd.1:1998(E)
Dentistry — Polymer-based crown and bridge materials
AMENDMENT 1
Page 1
Clause 1 Scope
After the first paragraph, add the following paragraph.
"This International Standard applies to polymer-based crown and bridge materials for
which the manufacturer claims adhesion to the metal sub-frame without
macromechanical retention, such as beads or wires. It does not apply to denture base
polymer and its adhesion to metal alloys, or to ceramic and its bonding to alloys."
Clause 2 Normative references
Add the two following references:
Dental casting gold alloys
ISO 1562:1993, .
Dental casting alloys with noble metal content of 25 % up to but
ISO 8891:1993,
not including 75 %.
1

---------------------- Page: 7 ----------------------

SIST EN ISO 10477:2000/A1:2000
©
ISO
ISO 10477:1992/Amd.1:1998(E)
Page 2
Clause 5 Requirements
After subclause 5.2.8 add the following subclause.
5.2.9 Bond strength
5.2.9.1 If the manufacturer recommends a special bonding system without
macromechanical retention, the bond strength shall be not less than 5 MPa.
5.2.9.2 If the manufacturer claims a specific value for the bond strength, then the
bond strength shall be not less than 80 % of this value.
Testing shall be carried out in accordance with 7.9.
Page 7
Clause 7 Test methods
After subclause 7.8.3 add the following subclause.
7.9 Bond strength
7.9.1 Apparatus
7.9.1.1 Mould, of stainless steel with a slightly conical bore having a large diameter
of (5 ± 0,1) mm and a small diameter of (4,9 ± 0,1) mm, and (2,5 ± 0,05) mm high,
with sharp edges. The mould may be coated with a separating medium, e.g. a 3 %
solution of polyvinylstearyl ether wax in hexane.
7.9.1.2 Five metal plates, made of an alloy suitable for crown and bridge
technique wit
...