oSIST prEN 3774-004:2021

Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 1 A to 25 A - Part 004: UNC thread terminals - Product standard

This document specifies the characteristics of three-pole circuit breakers, temperature compensated with a rated current from 1 A to 25 A, used in aircraft on-board circuits at a temperature between −55 °C and 125 °C for ratings ≤ 15 A and −55 °C to 90 °C for ratings > 15 A and at an altitude of 22 000 m max.
These circuit breakers are operated by a push-pull type single pushbutton (actuator), with delayed action “trip-free” tripping.
They will continue to function up to the short-circuit current.

Luft- und Raumfahrt - Schutzschalter, dreipolig, temperaturkompensiert, Nennströme von 1 A bis 25 A - Teil 004: UNC-Klemmengewind - Produktnorm

Série aérospatiale - Disjoncteurs tripolaires compensés en température, intensités nominales 1 A à 25 A - Partie 004 : Bornes à filetage UNC - Norme de produit

Le présent document spécifie les caractéristiques des disjoncteurs tripolaires compensés en température à intensité nominale de 1 A à 25 A, utilisés dans les circuits embarqués des aéronefs à des températures comprises entre -55 °C et 125 °C pour des intensités ≤ 15 A et de -55 °C à 90 °C pour des intensités > 15 A, à une altitude de 22 000 m max.
Ces disjoncteurs sont commandés par un bouton-poussoir unique (bouton de commande) de type « push-pull », à déclenchement libre temporisé.
Leur fonctionnement est assuré jusqu’au courant de court-circuit.

Aeronavtika - Odklopniki, tripolni, temperaturno kompenzirani, nazivni tok od 1 A do 25 A - 004. del: UNC-navojni priključki - Standard za proizvod

General Information

• Status: Not Published
• Public Enquiry End Date: 30-Sep-2021
• ICS: 29.120.50 - Fuses and other overcurrent protection devices
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 29-Jul-2021
• Due Date: 16-Dec-2021
• Completion Date: 25-Aug-2021
• Ref Project: prEN 3774-004 - Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 1 A to 25 A - Part 004: UNC thread terminals - Product standard

Relations

• Revised: SIST EN 3774-004:2014 - Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 1 A to 25 A - Part 004: UNC thread terminals - Product standard
• Effective Date: 14-Jul-2021
• Revised: SIST EN 3774-004:2014 - Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 1 A to 25 A - Part 004: UNC thread terminals - Product standard
• Effective Date: 18-Jan-2023
• Revised: SIST EN 3774-004:2014 - Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 1 A to 25 A - Part 004: UNC thread terminals - Product standard
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 3774-004:2021
01-september-2021
Aeronavtika - Odklopniki, tripolni, temperaturno kompenzirani, nazivni tok od 1 A
do 25 A - 004. del: UNC-navojni priključki - Standard za proizvod
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated
currents 1 A to 25 A - Part 004: UNC thread terminals - Product standard
Luft- und Raumfahrt - Schutzschalter, dreipolig, temperaturkompensiert, Nennströme von
1 A bis 25 A - Teil 004: UNC-Klemmengewind - Produktnorm
Série aérospatiale - Disjoncteurs tripolaires compensés en température, intensités
nominales 1 A à 25 A - Partie 004 : Bornes à filetage UNC - Norme de produit
Ta slovenski standard je istoveten z: prEN 3774-004
ICS:
29.120.50 Varovalke in druga Fuses and other overcurrent
nadtokovna zaščita protection devices
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
oSIST prEN 3774-004:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 3774-004:2021

---------------------- Page: 2 ----------------------
oSIST prEN 3774-004:2021


DRAFT
EUROPEAN STANDARD
prEN 3774-004
NORME EUROPÉENNE

EUROPÄISCHE NORM

July 2021
ICS 49.060 Will supersede EN 3774-004:2014
English Version

Aerospace series - Circuit breakers, three-pole,
temperature compensated, rated currents 1 A to 25 A -
Part 004: UNC thread terminals - Product standard
Série aérospatiale - Disjoncteurs tripolaires compensés Luft- und Raumfahrt - Schutzschalter, dreipolig,
en température, intensités nominales 1 A à 25 A - temperaturkompensiert, Nennströme von 1 A bis 25 A
Partie 004 : Bornes à filetage UNC - Norme de produit - Teil 004: UNC-Klemmengewind - Produktnorm
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 3774-004:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 3774-004:2021
prEN 3774-004:2021 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Dimensions and mass . 4
4.1 Dimensional characteristics . 4
4.2 Electrical diagram . 5
4.3 Mass . 6
4.4 Panel mounting . 6
5 Characteristics . 6
5.1 Material, surface treatment . 6
5.2 Mechanical characteristics . 6
5.2.1 Fasteners . 6
5.2.2 Recommended tightening torque of attaching nut for installation . 6
5.2.3 Recommended tightening torque of connection hardware for installation . 7
5.2.4 Resistance to vibrations . 7
5.2.5 Resistance to shocks . 7
5.2.6 Mechanical endurance . 7
5.3 Environment characteristics . 7
5.3.1 Humidity . 7
5.3.2 Corrosion . 7
5.3.3 Contaminating liquids . 7
5.3.4 Overvoltage caused by lightning . 7
5.4 Electrical characteristics . 7
5.4.1 Nominal voltage of operational circuits . 7
5.4.2 Voltage drop at Ι and low current . 8
n
5.4.3 Minimum and maximum tripping thresholds . 8
5.4.4 Overload trip . 9
5.4.5 Short-circuit values . 9
5.4.6 No-load and load endurance . 10
5.4.7 Dielectric rigidity . 10
5.4.8 Insulation resistance . 10
6 Designation . 11
7 Rated current code . 11
8 Delivery codes . 11
9 Marking . 12
10 Technical specification . 12

2

---------------------- Page: 4 ----------------------
oSIST prEN 3774-004:2021
prEN 3774-004:2021 (E)
European foreword
This document (prEN 3774-004:2021) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN
...