iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 300 396-8-4 V1.1.1:2003

(Main)

Terrestrial Trunked Radio (TETRA); Technical requirements for Direct Mode Operation (DMO); Part 8: Protocol Implementation Conformance Statement (PICS) proforma specification; Sub-part 4: Type 2 repeater Air Interface (AI)

Terrestrial Trunked Radio (TETRA); Technical requirements for Direct Mode Operation (DMO); Part 8: Protocol Implementation Conformance Statement (PICS) proforma specification; Sub-part 4: Type 2 repeater Air Interface (AI)

To produce a PICS proforma for Direct Mode Operation of Repeater type 2

Prizemni snopovni radio (TETRA) - Tehnične zahteve za neposredno obratovanje (DMO) - 8. del: Izjava o skladnosti izvedbe protokola (PICS) - Proforma specifikacija - 4. poddel: Radijski vmesnik (AI) tipa 2 ponavljalnika (repetitorja)

General Information

Status
Published
Publication Date
30-Nov-2003
ICS
33.070.10 - Terrestrial Trunked Radio (TETRA)
Technical Committee
SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Dec-2003
Due Date
01-Dec-2003
Completion Date
01-Dec-2003
Mandate
BC-T-344
T-172
Ref Project
ETSI EN 300 396-8-4 V1.1.1 (2001-01) - Terrestrial Trunked Radio (TETRA); Technical requirements for Direct Mode Operation (DMO); Part 8: Protocol Implementation Conformance Statement (PICS) proforma specification; Sub-part 4: Type 2 repeater Air Interface (AI)

Buy Standard

EN 300 396-8-4 V1.1.1:2003EN 300 396-8-4 V1.1.1:2003
PreviousNext
Standard
EN 300 396-8-4 V1.1.1:2003
English language
46 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.REUDWRYDQMHRIRUPDTerrestrial Trunked Radio (TETRA); Technical requirements for Direct Mode Operation (DMO); Part 8: Protocol Implementation Conformance Statement (PICS) proforma specification; Sub-part 4: Type 2 repeater Air Interface (AI)33.070.10Prizemni snopovni radio (TETRA)Terrestrial Trunked Radio (TETRA)ICS:Ta slovenski standard je istoveten z:EN 300 396-8-4 Version 1.1.1SIST EN 300 396-8-4 V1.1.1:2003en01-december-2003SIST EN 300 396-8-4 V1.1.1:2003SLOVENSKI
STANDARD



SIST EN 300 396-8-4 V1.1.1:2003



ETSIEN300396-8-4V1.1.1(2001-01)EuropeanStandard(Telecommunicationsseries)TerrestrialTrunkedRadio(TETRA);TechnicalrequirementsforDirectModeOperation(DMO);Part8:ProtocolImplementationConformanceStatement(PICS)proformaspecification;Sub-part4:Type2repeaterAirInterface(AI)SIST EN 300 396-8-4 V1.1.1:2003



ETSIETSIEN300396-8-4V1.1.1(2001-01)2ReferenceDEN/TETRA-02007-8-4KeywordsDMO,ICS,PICS,radio,TETRAETSI650RoutedesLuciolesF-06921SophiaAntipolisCedex-FRANCETel.:+33492944200Fax:+33493654716SiretN°34862356200017-NAF742CAssociationàbutnonlucratifenregistréeàlaSous-PréfecturedeGrasse(06)N°7803/88ImportantnoticeIndividualcopiesofthepresentdocumentcanbedownloadedfrom:http://www.etsi.orgThepresentdocumentmaybemadeavailableinmorethanoneelectronicversionorinprint.Inanycaseofexistingorperceiveddifferenceincontentsbetweensuchversions,thereferenceversionisthePortableDocumentFormat(PDF).Incaseofdispute,thereferenceshallbetheprintingonETSIprintersofthePDFversionkeptonaspecificnetworkdrivewithinETSISecretariat.Usersofthepresentdocumentshouldbeawarethatthedocumentmaybesubjecttorevisionorchangeofstatus.InformationonthecurrentstatusofthisandotherETSIdocumentsisavailableathttp://www.etsi.org/tb/status/Ifyoufinderrorsinthepresentdocument,sendyourcommentto:editor@etsi.frCopyrightNotificationNopartmaybereproducedexceptasauthorizedbywrittenpermission.Thecopyrightandtheforegoingrestrictionextendtoreproductioninallmedia.©EuropeanTelecommunicationsStandardsInstitute2001.Allrightsreserved.SIST EN 300 396-8-4 V1.1.1:2003



ETSIETSIEN300396-8-4V1.1.1(2001-01)3ContentsIntellectualPropertyRights.5Foreword.5Introduction.61Scope.72References.73Definitionsandabbreviations.73.1Definitions.73.2Abbreviations.84ConformancetothisPICSproformaspecification.8AnnexA(normative):ProtocolICSproforma(PICS)forEN300396-4.9A.1GuidanceforcompletingthePICSproforma.9A.1.1Purposesandstructure.9A.1.2Abbreviationsandconventions.9A.1.3InstructionsforcompletingthePICSproforma.11A.2Identificationoftheimplementation.11A.2.1Dateofthestatement.11A.2.2ImplementationUnderTest(IUT)identification.11A.2.3SystemUnderTest(SUT)identification.12A.2.4Productsupplier.12A.2.5Client(ifdifferentfromproductsupplier).12A.2.6PICScontactperson.13A.3IdentificationoftheProtocol.13A.4Globalstatementofconformance.13A.5Roles.14A.6ProtocolsforDM-MSsupportingoperationwithatype2DM-REP(MS-REP2).14A.6.1MS-REP2DirectModeCallControl(DMCC)atLayer3.14A.6.1.1DMCCmajorcapabilities.14A.6.1.2Circuitmodecall.15A.6.1.3Circuitmodecallset-up.15A.6.1.4Circuitmodeservicesoffered.16A.6.1.5Shortdataservices.16A.6.1.6Typeofshortdataservice.17A.6.1.7Datatransmission.18A.6.1.8SDSuserdefineddata.18A.6.1.9DMCCPDUs.19A.6.1.10DMCCconstants.21A.6.1.11DMCCtimers.22A.6.2MS-REP2Datalinklayer(DLL)atLayer2.23A.6.2.1MS-REP2MACfeatures.23A.6.2.2MS-REP2-MACprocedures.23A.6.2.3MS-REP2MACPDUs.27A.6.2.4MS-REP2MACgeneratedmessages.28A.6.2.5MS-REP2MACconstants.28A.6.2.6MS-REP2MACtimers.30A.7DM-REPtype2Protocol(DM-REP2).31A.7.1DM-REP2Datalinklayer(DLL)atLayer2.31A.7.1.1Majorservices.31A.7.1.2DM-REP2MACfeatures.31SIST EN 300 396-8-4 V1.1.1:2003



ETSIETSIEN300396-8-4V1.1.1(2001-01)4A.7.1.3DM-REP2MACprocedures.32A.7.1.4DM-REP2MACPDUs.34A.7.1.5DM-REP2MACgeneratedmessages.34A.7.1.6DM-REP2MACconstants.34A.7.1.7DM-REP2MACtimers.35A.8PDUparametersforMS-REP2andDM-REP2usedinDMCCatlayer3andDLLatlayer2.36A.8.1MS-REP2PDUparametersforDMCCatlayer3.36A.8.1.1DM-SETUP.36A.8.1.2DM-SETUPPRES.36A.8.1.3DM-CONNECT.37A.8.1.4DM-DISCONNECT.37A.8.1.5DM-CONNECTACK.37A.8.1.6DM-OCCUPIED.38A.8.1.7DM-RELEASE.38A.8.1.8DM-TXCEASED.38A.8.1.9DM-TXREQUEST.39A.8.1.10DM-TXACCEPT.39A.8.1.11DM-PREEMPT.39A.8.1.12DM-PREACCEPT.39A.8.1.13DM-REJECT.39A.8.1.14DM-INFO.40A.8.1.15DM-SDSUDATA.40A.8.1.16DM-SDSDATA.41A.8.1.17DM-SDSACK.41A.8.2MS-REP2andDM-REP2PDUparametersforDLLatlayer2.42A.8.2.1DMAC-SYNCinSCH/S.42A.8.2.2DPRES-SYNCPDU.43A.8.2.3DMAC-DATA.44A.8.2.4DMAC-FRAG.44A.8.2.5DMAC-END.44A.8.2.6DMAC-USIGNAL.44A.8.3DM-MACgeneratedmessageparameters.45A.8.3.1DM-RESERVED.45A.8.3.2DM-SDSOCCUPIED.45A.8.3.3DM-TIMINGREQUEST.45A.8.3.4DM-TIMINGACK.45History.46SIST EN 300 396-8-4 V1.1.1:2003



ETSIETSIEN300396-8-4V1.1.1(2001-01)5IntellectualPropertyRightsIPRsessentialorpotentiallyessentialtothepresentdocumentmayhavebeendeclaredtoETSI.TheinformationpertainingtotheseessentialIPRs,ifany,ispubliclyavailableforETSImembersandnon-members,andcanbefoundinETSISR000314:"IntellectualPropertyRights(IPRs);Essential,orpotentiallyEssential,IPRsnotifiedtoETSIinrespectofETSIstandards",whichisavailablefromtheETSISecretariat.LatestupdatesareavailableontheETSIWebserver(http://www.etsi.org/ipr).PursuanttotheETSIIPRPolicy,noinvestigation,includingIPRsearches,hasbeencarriedoutbyETSI.NoguaranteecanbegivenastotheexistenceofotherIPRsnotreferencedinETSISR000314(ortheupdatesontheETSIWebserver)whichare,ormaybe,ormaybecome,essentialtothepresentdocument.ForewordThisEuropeanStandard(Telecommunicationsseries)hasbeenproducedbyETSIProjectTerrestrialTrunkedRadio(TETRA).ThepresentdocumenthadbeensubmittedtoPublicEnquiryasETS300396-8-4.DuringtheprocessingforVoteitwasconvertedintoanEN.Thepresentdocumentispart8ofamulti-partdeliverablecoveringtheTerrestrialTrunkedRadio(TETRA);TechnicalrequirementsforDirectModeOperation(DMO);asidentifiedbelow:Part1:"Generalnetworkdesign";Part2:"Radioaspects";Part3:"MobileStationtoMobileStation(MS-MS)AirInterface(AI)protocol";Part4:"Type1repeaterairinterface";Part5:"Gatewayairinterface";Part6:"Security";Part7:"Type2repeaterairinterface";Part8:"ProtocolImplementationConformanceStatement(PICS)proformaspecification";Part9:"ServiceandDescriptionLanguage(SDL)model";Part10:"ManagedDirectModeOperation(DMO)".NationaltranspositiondatesDateofadoptionofthisEN:22December2000DateoflatestannouncementofthisEN(doa):31March2001DateoflatestpublicationofnewNationalStandardorendorsementofthisEN(dop/e):30September2001DateofwithdrawalofanyconflictingNationalStandard(dow):30September2001SIST EN 300 396-8-4 V1.1.1:2003



ETSIETSIEN300396-8-4V1.1.1(2001-01)6IntroductionToevaluateconformanceofaparticularimplementation,itisnecessarytohaveastatementofwhichcapabilitiesandoptionshavebeenimplementedforatelecommunicationspecification.SuchastatementiscalledanImplementationConformanceStatement(ICS).SIST EN 300 396-8-4 V1.1.1:2003



ETSIETSIEN300396-8-4V1.1.1(2001-01)71ScopeThepresentdocumetprovidestheProtocolImplementationConformanceStatement(PICS)proformaforTETRADirectModeOperation(DMO)MobileStations(MS)connectedtoType2repeater(MS-REP2)andforTETRADirectModeOperationType2repeater(DM-REP2),definedinEN300396-7[1]incompliancewiththerelevantrequirements,andinaccordancewiththerelevantguidancegiveninISO/IEC9646-7[6]andETS300406[4].2ReferencesThefollowingdocumentscontainprovisionswhich,throughreferenceinthistext,constituteprovisionsofthepresentdocument.• Referencesareeitherspecific(identifiedbydateofpublication,editionnumber,versionnumber,etc.)ornon-specific.• Foraspecificreference,subsequentrevisionsdonotapply.• Foranon-specificreference,thelatestversionapplies.[1]ETSIEN300396-7:"TerrestrialTrunkedRadio(TETRA);TechnicalrequirementsforDirectModeOperation(DMO);Part7:Type2repeaterairinterface".[2]ETSIETS300396-3:"TerrestrialTrunkedRadio(TETRA);TechnicalrequirementsforDirectModeOperation(DMO);Part3:MobileStationtoMobileStation(MS-MS)AirInterface(AI)protocol".[3]ETSIEN300396-8-2:"TerrestrialTrunkedRadio(TETRA);TechnicalrequirementsforDirectModeOperation(DMO);Part8:ProtocolImplementationConformanceStatement(PICS)proformaspecification;Sub-part2:Type1repeaterAirInterface(AI)".[4]ETSIETS300406:"MethodsforTestingandSpecification(MTS);Protocolandprofileconformancetestingspecifications;Standardizationmethodology".[5]ISO/IEC9646-1(1994):"Informationtechnology-Opensystemsinterconnection-Conformancetestingmethodologyandframework-Part1:Generalconcepts".[6]ISO/IEC9646-7(1995):"Informationtechnology-Opensystemsinterconnection-Conformancetestingmethodologyandframework-Part7:ImplementationConformanceStatements".[7]ETSIEN300396-4:"TerrestrialTrunkedRadio(TETRA);TechnicalrequirementsforDirectModeOperation(DMO);Part4:Type1repeaterairinterface".3Definitionsandabbreviations3.1DefinitionsForthepurposesofthepresentdocument,thetermsanddefinitionsgiveninEN300396-4[7],ISO/IEC9646-1[5],ISO/IEC9646-7[6]andthefollowingapply.ImplementationConformanceStatement(ICS):statementmadebythesupplierofanimplementationorsystemclaimedtoconformtoagivenspecification,statingwhichcapabilitieshavebeenimplemented.TheICScantakeseveralforms:protocolICS,profileICS,profilespecificICS,informationobjectICS,etc.ICSproforma:document,intheformofaquestionnaire,whichwhencompletedforanimplementationorsystembecomesanICSProtocolICS(PICS):ICSforanimplementationorsystemclaimedtoconformtoagivenprotocolspecificationSIST EN 300 396-8-4 V1.1.1:2003



ETSIETSIEN300396-8-4V1.1.1(2001-01)83.2AbbreviationsForthepurposesofthepresentdocument,thefollowingabbreviationsapply:ICSImplementationConformanceStatementIUTImplementationUnderTestPICSProtocolImplementationConformanceStatementSCSSystemConformanceStatementSUTSystemUnderTest4ConformancetothisPICSproformaspecificationIfitclaimstoconformtothepresentdocument,theactualPICSproformatobefilledinbyasuppliershallbetechnicallyequivalenttothetextofthePICSproformagiveninannexA,andshallpreservethenumbering/namingandorderingoftheproformaitems.APICSwhichconformstothepresentdocumentshallbeaconformingPICSproformacompletedinaccordancewiththeguidanceforcompletiongiveninclauseA.1.SIST EN 300 396-8-4 V1.1.1:2003



ETSIETSIEN300396-8-4V1.1.1(2001-01)9AnnexA(normative):ProtocolICSproforma(PICS)forEN300396-4Notwithstandingtheprovisionsofthecopyrightclauserelatedtothetextofthepresentdocument,ETSIgrantsthatusersofthepresentdocumentmayfreelyreproducethePICSproformainthisannexsothatitcanbeusedforitsintendedpurposesandmayfurtherpublishthecompletedPICS.A.1GuidanceforcompletingthePICSproformaA.1.1PurposesandstructureThepurposeofthisPICSproformaistoprovideamechanismwherebyasupplierofanimplementationoftherequirementsdefinedinEN300396-7[1]mayprovideinformationabouttheimplementationinastandardizedmanner.ThePICSproformaissubdividedintoclausesforthefollowingcategoriesofinformation:• guidanceforcompletingthePICSproforma;• identificationoftheimplementation;• identificationoftheProtocol;• globalstatementofconformance;• identificationoftheroles,MS-REP2orDM-REP2;• MS-REP2layer3protocolpart;• MS-REP2protocollayer2part;• DM-REP2part.A.1.2AbbreviationsandconventionsThePICSproformacontainedinthisannexiscomprisedofinformationintabularforminaccordancewiththeguidelinespresentedinISO/IEC9646-7[6].ItemcolumnTheitemcolumncontainsanumberwhichidentifiestheiteminthetable.ItemdescriptioncolumnTheitemdescriptioncolumndescribesinfreetexteachrespectiveitem(e.g.parameters,timers,etc.).Itimplicitlymeans"issupportedbytheimplementation?".StatuscolumnThefollowingnotations,definedinISO/IEC9646-7[6],areusedforthestatuscolumn:mmandatory-thecapabilityisrequiredtobesupported;ooptional-thecapabilitymaybesupportedornot;n/anotapplicable-inthegivencontext,itisimpossibletousethecapability;xprohibited(excluded)-thereisarequirementnottousethiscapabilityinthegivencontext;SIST EN 300 396-8-4 V1.1.1:2003



ETSIETSIEN300396-8-4V1.1.1(2001-01)10o.iqualifiedoptional-formutuallyexclusiveorselectableoptionsfromaset."i"isanintegerwhichidentifiesauniquegroupofrelatedoptionalitemsandthelogicoftheirselectionwhichisdefinedimmediatelyfollowingthetable;ciconditional-therequirementonthecapability("m","o","x"or"n/a")dependsonthesupportofotheroptionalorconditionalitems."i"isanintegeridentifyingauniqueconditionalstatusexpressionwhichisdefinedimmediatelyfollowingthetable.ReferencecolumnThereferencecolumnmakesreferencetoEN300396-7[1],exceptwhereexplicitlystatedotherwise.SupportcolumnThesupportcolumnshallbefilledinbythesupplieroftheimplementation.Thefollowingcommonnotations,definedinISO/IEC9646-7[6],areusedforthesupportcolumn:Yorysupportedbytheimplementation;Nornnotsupportedbytheimplementation;N/A,n/aor-noanswerrequired(allowedonlyifthestatusisn/a,directlyorafterevaluationofaconditionalstatus).IfthisPICSproformaiscompletedinordertodescribeamultiple-profilesupportinasystem,itisnecessarytobeabletoanswerthatacapabilityissupportedforoneprofileandnotsupportedforanother.Inthatcase,thesuppliershallentertheuniquereferencetoaconditionalexpression,precededby"?"(e.g.?3).Thisexpressionshallbegiveninthespaceforcommentsprovidedatthebottomofthetable.ItusespredicatesdefinedintheSCS,eachofwhichreferstoasingleprofileandwhichtakesthevalueTRUEifandonlyifthatprofileistobeused.EXAMPLE:?3:IFprof1THENYELSENItisalsopossibletoprovideacommenttoananswerinthespaceprovidedatthebottomofthetable.NOTE:AsstatedinISO/IEC9646-7[6],supportforareceivedPDUrequirestheabilitytoparseallvalidparametersofthatPDU.SupportingaPDUwhilehavingnoabilitytoparseavalidparameterisnon-conformant.SupportforaparameteronaPDUmeansthatthesemanticsofthatparameteraresupported.ValuesallowedcolumnThevaluesallowedcolumncontainsthetype,thelist,therange,orthelengthofvaluesallowed.Thefollowingnotationsareused:• rangeofvalues:.example:5.20• listofvalues:,,.,example:2,4,6,8,9example:'1101'B,'1011'B,'1111'Bexample:'0A'H,'34'H,'2F'H• listofnamedvalues:(),(),.,(example:reject(1),accept(2)• length:size(.)example:size(1.8)SIST EN 300 396-8-4 V1.1.1:2003



ETSIETSIEN300396-8-4V1.1.1(2001-01)11ValuessupportedcolumnThevaluessupportedcolumnshallbefilledinbythesupplieroftheimplementation.Inthiscolumn,thevaluesortherangesofvaluessupportedbytheimplementationshallbeindicated.ReferencestoitemsForeachpossibleitemanswer(answerinthesupportcolumn)withinthePICSproformaauniquereferenceexists,used,forexample,intheconditionalexpressions.Itisdefinedasthetableidentifier,followedbyasoliduscharacter"/",followedbytheitemnumberinthetable.Ifthereismorethanonesupportcolumninatable,thecolumnsarediscriminatedbyletters(a,b,etc.),respectively.EXAMPLE1:A.5/4isthereferencetotheanswerofitem4intable5ofannexA.EXAMPLE2:A.6/3bisthereferencetothesecondanswer(i.e.inthesecondsupportcolumn)ofitem3intable6ofannexA.PrerequisitelineAprerequisitelinetakestheform:Prerequisite:.AprerequisitelineafteraclauseortabletitleindicatesthatthewholeclauseorthewholetableisnotrequiredtobecompletedifthepredicateisFALSE.A.1.3InstructionsforcompletingthePICSproformaThesupplieroftheimplementationshallcompletethePICSproformaineachofthespacesprovided.Inparticular,anexplicitanswershallbeentered,ineachofthesupportorsupportedcolumnboxesprovided,usingthenotationdescribedinclauseA.1.2.Ifnecessary,thesuppliermayprovideadditionalcommentsinspaceatthebottomofthetables,orseparatelyonsheetsofpaper.MoredetailedinstructionsaregivenatthebeginningofthedifferentclausesofthePICSproforma.A.2IdentificationoftheimplementationIdentificationoftheImplementationUnderTest(IUT)andthesysteminwhichitresides(theSystemUnderTest(SUT))shouldbefilledinsoastoprovideasmuchdetailaspossibleregardingversionnumbersandconfigurationoptions.Theproductsupplierinformationandclientinformationshouldbothbefillediniftheyaredifferent.ApersonwhocananswerqueriesregardinginformationsuppliedinthePICSshouldbenamedasthecontactperson.A.2.1DateofthestatementA.2.2ImplementationUnderTest(IUT)identificationIUTname:.IUTversion:.SIST EN 300 396-8-4 V1.1.1:2003



ETSIETSIEN300396-8-4V1.1.1(2001-01)12A.2.3SystemUnderTest(SUT)identificationSUTname:.Hardwareconfiguration:.Operatingsystem:.A.2.4ProductsupplierName:.Address:.Telephonenumber:.Facsimilenumber:.E-mailaddress:.Additionalinformation:.A.2.5Client(ifdifferentfromproductsupplier)Name:.Address:.Telephonenumber:.Facsimilenumber:.E-mailaddress:.Additionalinformation:.SIST EN 300 396-8-4 V1.1.1:2003



ETSIETSIEN300396-8-4V1.1.1(2001-01)13A.2.6PICScontactperson(ApersontocontactifthereareanyqueriesconcerningthecontentofthePICS)Name:.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 300 394-1 V2.4.1:2006(Main)
Terrestrial Trunked Radio (TETRA); Conformance testing specification; Part 1: Radio
ETSI EN 300 394-1 V2.4.1 (2006-02)

The present document specifies the minimum technical characteristics of TETRA Voice plus Data (V+D) Base Stations (BS) and Mobile Station (MS) equipment, and TETRA Direct Mode Operation (DMO) equipment, and the radio test methods used for type testing. Specific test methods for DMO equipment are defined in annex F of the present document. The purpose of these specifications is to provide a sufficient quality of radio transmission and reception for equipment operating in a TETRA system and to minimize harmful interference to other equipment. The present document is applicable to TETRA systems operating at radio frequencies in the range of 300 MHz to 1 GHz.

  • Standard
    114 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 392-12-6 V1.3.1:2006(Main)
Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 12: Supplementary services stage 3; Sub-part 6: Call Authorized by Dispatcher (CAD)
ETSI EN 300 392-12-6 V1.3.1 (2006-02)

The present document defines the stage 3 specifications of the Supplementary Service Call Authorized by Dispatcher (SS-CAD) for the Terrestrial Trunked RAdio (TETRA) as provided by European operators. Stage 3 defines the signalling system protocols needed to implement the service described in stage 1 and stage 2. The stage 1 and stage 2 aspects are detailed in EN 300 392 10-6 [2] and EN 300 392-11-6 [3] respectively. Aspects relating to all supplementary services are detailed in EN 300392-9 [6]. Charging principles and the Man-Machine Interface (MMI) are outside the scope of the present document. The SS-CAD ensures that predefined TETRA calls do not proceed without first being authorized by a dispatcher.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 301 040 V2.1.1:2006(Main)
Terrestrial Trunked Radio (TETRA); Security; Lawful Interception (LI) interface
ETSI EN 301 040 V2.1.1 (2006-03)

The present document describes the data content of a Lawful Interception interface in a TETRA system. It provides the requirements and specification of the interface within a TETRA system for the purpose of providing data to Law Enforcement Agencies (LEAs) in the area of Lawful Interception (LI) of communications. The present document describes the internal LI interface of a TETRA network, and does not specify the means by which data is delivered to the LEA or to its designated Law Enforcement Monitoring Facility (LEMF). However the internal LI interface is defined in such a way that data may be carried transparently on most networks.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 392-12-21 V1.2.1:2006(Main)
Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 12: Supplementary services stage 3; Sub-part 21: Ambience Listening (AL)
ETSI EN 300 392-12-21 V1.2.1 (2004-11)

The present document defines the stage 3 specification of the Supplementary Service Ambience Listening (SS-AL) for the Terrestrial Trunked Radio (TETRA). Stage 3 defines the signalling system protocols and switching functions needed to implement the service described in stage 1 and stage 2. Charging principles and Man-Machine Interface (MMI) are outside the scope of the present document. The SS-AL enables the served user to place a TETRA Mobile Station (MS) into a special type of voice call whereby the called MS transmits without any action from, or indication to, the affected user. The SS-AL call can include a second listening party. The affected user can ask other user to set an SS-AL call on him.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 392-3-5 V1.2.1:2006(Main)
Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 3: Interworking at the Inter-System Interface (ISI); Sub-part 5: Additional Network Feature for Mobility Management (ANF-ISIMM)
ETSI EN 300 392-3-5 V1.2.1 (2004-01)

The present document defines the mobility management of interworking at the Inter-System Interface (ISI) for Terrestrial Trunked Radio (TETRA) system supporting Voice plus Data (V+D).
The TETRA V+D Inter-working - basic operation part defines the Inter-System Interface (ISI) between the SwMIs as specified in the following sub-parts:
• Additional Network Feature - Inter-System Interface General Description (ANF-ISIGD);
• Additional Network Feature - Inter-System Interface Individual Call (ANF-ISIIC);
• Additional Network Feature - Inter-System Interface Group Call (ANF-ISIGC);
• Additional Network Feature - Inter-System Interface Short Data Service (ANF-ISISD);
• Additional Network Feature - Inter-System Interface Mobility Management (ANF-ISIMM).
NOTE: These ENs are produced in analogy with the ITU-T Recommendation I.130 [8].
The present document contains the ANF-ISIMM part. The ANF-ISIMM part defines additional Mobility Management (MM) services to the SwMIs. If supported, the ANF-ISIMM services complement the intra-SwMI-MM, authentication and key management services. In support of these, the ANF-ISIMM enables the invocation and operation of these services between the SwMIs over the ISI. Thus, ANF-ISIMM offers the following services:
• migration and restricted migration;
• individual subscriber and group profile update;
• profile update;
• de-registration;
• group attachment/detachment;
• individual subscriber and group database fault recovery;
• authentication, one-directionally or mutually between the individual subscriber and the home SwMI;
• Over-The-Air-Re-keying (OTAR) for Static Cipher Key (SCK) generation and SCK delivery.
For the following service only the stage 1 descriptions are included:
• linking/unlinking of groups.

  • Standard
    423 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 392-2 V2.5.2:2006(Main)
Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 2: Air Interface (AI)
ETSI EN 300 392-2 V2.5.2 (2005-11)

The present document defines the Air Interface (AI) for the Terrestrial Trunked Radio (TETRA) system supporting Voice plus Data (V+D) and contains the specifications of the physical layer, the data link layer and the network layer according to the ISO model.
First, it establishes the TETRA radio aspects (layer 1):
• it defines and specifies the modulation;
• it defines and specifies the radio transmission and reception;
• it defines and specifies the synchronization;
• it defines and specifies the channel coding;
• it defines and specifies the channel multiplexing;
• it defines and specifies the control over the radio link.
Secondly, it establishes the services, messages and protocols used for voice and circuit mode data transfer, starting with the upper layers:
• it defines and specifies the services provided by the CC sub-entity;
• it defines and specifies the services provided by the SS sub-entity;
• it defines and specifies the services provided by the SDS sub-entity;
• it defines and specifies the protocol used by the Circuit Mode Control Entity (CMCE) to communicate across the air interface in order to offer the services of the Call Control (CC), Supplementary Service (SS) and Short Data Service (SDS) sub-entities;
• it defines and specifies the services and protocol used for the management of the users' mobility inside and across TETRA networks, namely the ones of the Mobility Management (MM) entity and the MLE;
• it defines and specifies the services and protocol used in the data link layer subdivided in two sub-entities, the Logical Link Control (LLC) and the Medium Access Control (MAC) entities.
Thirdly, it establishes the services, messages and protocols used for packet data transfer:
• it defines and specifies the services provided by the Sub-Network Specific Data Control Protocol (SNDCP) sub-entity;
• it defines and specifies the protocol used by Sub-Network Specific Data Control Protocol (SNDCP).
The normative annexes mainly specify the parameter values used in the protocol.
The informative annexes refer mainly to the description of more general layer 3 to layer 1 mechanism.

  • Standard
    898 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 392-11-6 V1.2.1:2006(Main)
Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 11: Supplementary services stage 2; Sub-part 6: Call Authorized by Dispatcher (CAD)
ETSI EN 300 392-11-6 V1.2.1 (2004-01)

The present document defines the stage 2 specifications of the Supplementary Service Call Authorized by Dispatcher (SS-CAD) for the Terrestrial Trunked Radio (TETRA) as provided by European operators. Stage 2 identifies the functional entities involved in the supplementary service and the information flows between them. Stage 2 is part of three stage definition where stage 1 (EN 300 392-10-6 [1]) specifies the service description and the procedures of the supplementary service and stage 3 specifies the service primitives, PDUs and protocols for functional entities. NOTE: The stage 2 description is followed by the stage 3 description EN 300 392-12-6 [2], which specifies the encoding rules for the information flows and process behaviour for the different entities in the SwMI, in the MS and in the LS. Aspects relating to all supplementary services are detailed in EN 300 392-9 [7]. Man-Machine Interface (MMI) and charging principles are outside the scope of the present document. The SS-CAD ensures that predefined TETRA calls do not proceed without first being authorized by a dispatcher.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 392-12-22 V1.2.1:2006(Main)
Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 12: Supplementary services stage 3; Sub-part 22: Dynamic Group Number Assignment (DGNA)
ETSI EN 300 392-12-22 V1.2.1 (2004-02)

The present document defines the stage 3 specifications of the Supplementary Service Dynamic Group Number Assignment (SS-DGNA) for the Terrestrial Trunked Radio (TETRA). The SS-DGNA enables a user to dynamically define group identities and group related parameters to the TETRA system and to the subscribers in the system. These definitions are used to enable group call invocations to dynamically defined groups. The SS-DGNA specification defines the creation, modification, deletion and interrogation of group definitions in the Switching and Management Infrastructure (SwMI), in the Mobile Station (MS).
The present document does not include the specification for access priority used for random access in uplink and call priority used by SwMI for resource allocation in a group call. Access priority and call priority can be specified and applied for groups using Supplementary Services Access Priority (SS-AP), Priority Call (SS-PC) and Pre-emptive Priority Call (SS-PPC). Thus, the definition procedure of these priorities is outside the scope of the present document.
Man-Machine Interface (MMI) and charging principles are also outside the scope of the present document. Supplementary service stage 3 specification is preceded by the stage 1 and the stage 2 specifications of the service. Stage 1 describes the functional capabilities from the user's point of view. Stage 2 defines the functional behaviour in terms of functional entities and information flows. Stage 3 gives the precise description of the supplementary service from the implementation point of view. It defines the protocols for the service and the encoding rules for the  information flows. It defines the processes for the functional entities and their behaviour. The described protocols and their behaviour apply for the SwMI and for the MS and can be applied over the Inter-System Interface (ISI) between TETRA systems.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 395-4 V1.3.1:2006(Main)
Terrestrial Trunked Radio (TETRA); Speech codec for full-rate traffic channel; Part 4: Codec conformance testing
ETSI EN 300 395-4 V1.3.1 (2005-06)

The objective of the present document is to define the conformance bounds for the TETRA speech and channel codec as deployed in the TETRA Speech Traffic Channel (TCH/S) channel type used in the TETRA Voice plus Data (V+D) equipment. For the speech part of the TCH/S codec, the conformance testing (clause 7 of the present document) consists of a bit-exact test where the reference is pre-computed and fixed. For the TCH/S channel encoding a bit exact conformance test is also defined (see clause 6.4). For the TCH/S channel decoding, a non-bit exact test is employed with the specifications designed such that a sufficient quality of performance is met by the TETRA equipment (see clause 6.3).

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 392-12-16 V1.2.1:2006(Main)
Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 12: Supplementary services stage 3; Sub-part 16: Pre-emptive Priority Call (PPC)
ETSI EN 300 392-12-16 V1.2.1 (2004-09)

The present document defines the stage 3 specifications of the Supplementary Service Pre-emptive Priority Call (SS-PC) for the Terrestrial Trunked Radio (TETRA). SS-PPC enables a user to have preferential access to the network resources in a TETRA system in times of congestion including pre-emption of calls. SS-PPC is applicable for pre-emptive priorities including the emergency priority. SS-PPC includes the capability to pre-empt resources needed for higher priority calls and the capability to pre-empt users from ongoing calls in order to move them to a higher priority calls. SS-PPC specifies the definition, activation, deactivation and interrogation for the usage of pre-emptive call priorities in the TETRA system. The Switching and Management Infrastructure (SwMI) applies the SS-PPC priorities when it allocates the resources for calls. The SS-PPC operations are defined for the SwMI and for the Mobile Station (MS). SS-PPC is defined to subscribers of one TETRA system, but the subscribers may be located in several TETRA systems and the information flows may be delivered over the Inter System Interface (ISI). SS-PPC is invoked for calls within one TETRA system or for calls that extend over ISI to several TETRA systems.
Man-Machine Interface (MMI) and charging principles are outside the scope of the present document.
Supplementary Service stage 3 specification is preceded by the stage 1 and the stage 2 specifications of the service. Stage 1 describes the functional capabilities from the user's point of view. Stage 2 defines the functional behaviour in terms of Functional Entities (FEs) and information flows. Stage 3 gives a precise description of the supplementary service from the implementation point of view. It defines the protocol for the service and the encoding rules for the information flows. It defines the processes for the FEs and their behaviour. The described protocols and behaviour apply to the SwMI, for the MS and may be applied over the ISI between TETRA systems. Aspects relating to all supplementary services are detailed in EN 300 392-9 [3].

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day