SIST EN 60320-3:2015/oprA2:2022
(Amendment)Amendment 2 - Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges
Amendment 2 - Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges
Gerätesteckvorrichtungen für den Hausgebrauch und ähnliche allgemeine Zwecke - Teil 3: Normblätter und Lehren
Connecteurs pour usages domestiques et usages généraux analogues - Partie 3: Feuilles de norme et calibres
Aparatne spojke za hišno rabo in podobne splošne namene - 3. del: Standardni merilni lističi - Dopolnilo A2
General Information
RELATIONS
Standards Content (sample)
SLOVENSKI STANDARD
SIST EN 60320-3:2015/oprA2:2022
01-marec-2022
Aparatne spojke za hišno rabo in podobne splošne namene - 3. del: Standardni
merilni lističi - Dopolnilo A2
Amendment 2 - Appliance couplers for household and similar general purposes - Part 3:
Standard sheets and gaugesGerätesteckvorrichtungen für den Hausgebrauch und ähnliche allgemeine Zwecke - Teil
3: Normblätter und LehrenConnecteurs pour usages domestiques et usages généraux analogues - Partie 3:
Feuilles de norme et calibres
Ta slovenski standard je istoveten z: EN 60320-3:2014/prA2:2022
ICS:
29.120.30 Vtiči, vtičnice, spojke Plugs, socket-outlets,
couplers
SIST EN 60320-3:2015/oprA2:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------SIST EN 60320-3:2015/oprA2:2022
---------------------- Page: 2 ----------------------
SIST EN 60320-3:2015/oprA2:2022
23G/470/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60320-3/AMD2 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-01-07 2022-04-01
SUPERSEDES DOCUMENTS:
23G/465/CD, 23G/468A/CC
IEC SC 23G : APPLIANCE COUPLERS
SECRETARIAT: SECRETARY:
Sweden Mr Ingvar Eriksson
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
SC 34D,TC 61,TC 108
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel votingThe attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.TITLE:
Amendment 2 - Appliance couplers for household and similar general purposes - Part 3:
Standard sheets and gaugesPROPOSED STABILITY DATE: 2024
NOTE FROM TC/SC OFFICERS:
Copyright © 2021 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing National
Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part of it,
for any other purpose without permission in writing from IEC.---------------------- Page: 3 ----------------------
SIST EN 60320-3:2015/oprA2:2022
IEC CDV 60320-3/AMD2 © IEC 2021 2 23G/470/CDV
1 Introduction (not part of the proposal)
3 This update reintroduces the table of compatibility
4 The drawings in Table 2 are added.
5 Standard sheets updated.
8 Proposal
9 4 General requirements
10 Add, in Table 2, the following rows:
60245
IEC 53
60245 IEC
10 I 120 Yes 0,75
M N
60245
IEC 53
60245 IEC
10 I 155 Yes 0,75
O P
60245
IEC 53
60245 IEC
16 I 155 Yes 1
13 Add the following new standard sheets after the existing standard sheet L:
---------------------- Page: 4 ----------------------
SIST EN 60320-3:2015/oprA2:2022
IEC CDV 60320-3/AMD2 © IEC 2021 3 23G/470/CDV
16 Standard sheet M
17 Plug connector for 10 A / 250 V for use in class I equipment in hot conditions
19 The outline 1) of the front part shall not be exceeded or decreased, at any point, within a
20 distance of 17 mm from the engagement face.21 The outline 2) of the rear part shall not be exceeded in any section perpendicular to the axis of
22 the plug connector, except that, for plug connectors with lateral cord entry and for those
23 combined with other accessories, this limitation does not apply in the direction of the axis of the
24 cord or of the actuating member.25 The sketches are not intended to govern design except as regards the dimensions shown.
26 Dimensions in millimetres29 NOTE The sketches are not intended to govern design, except as regards the dimensions shown. Dimensions
30 without tolerances are only recommendations.---------------------- Page: 5 ----------------------
SIST EN 60320-3:2015/oprA2:2022
IEC CDV 60320-3/AMD2 © IEC 2021 4 23G/470/CDV
33 Standard sheet N
34 Appliance outlet 10 A / 250 V for class I equipment in hot conditions
36 The sketches are not intended to govern design except as regards the dimensions shown.
38 Dimensions in millimetres43 NOTE The sketches are not intended to govern design, except as regards the dimensions shown. Dimensions
44 without tolerances are only recommendations.---------------------- Page: 6 ----------------------
SIST EN 60320-3:2015/oprA2:2022
IEC CDV 60320-3/AMD2 © IEC 2021 5 23G/470/CDV
47 Standard sheet O
48 Plug connector for 10 A / 250 V for use in class I equipment in very hot condition
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.