SIST EN 16069:2013+A1:2015/oprA2:2018

Thermal insulation products for buildings - Factory made products of polyethylene foam (PEF) - Specification

DOW = DAV + 21 months

Wärmedämmstoffe für Gebäude - Werkmäßig hergestellte Produkte aus Polyethylenschaum (PEF) - Spezifikation

Produits isolants thermiques pour le bâtiment - Produits manufacturés en mousse de polyethylene (PEF) - Spécification

Toplotnoizolacijski proizvodi za stavbe - Proizvodi iz polietilenske pene (PEF) - Specifikacija

General Information

• Status: Not Published
• Public Enquiry End Date: 25-Nov-2018
• ICS: 91.100.60 - Thermal and sound insulating materials
• Technical Committee: TOP - Thermal insulation
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 01-Oct-2021
• Due Date: 06-Oct-2021
• Completion Date: 01-Oct-2021
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Mandate: M/103 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on thermal insulating products
• Ref Project: EN 16069:2012+A1:2015/prA2 - Thermal insulation products for buildings - Factory made products of polyethylene foam (PEF) - Specification

Relations

• Amends: SIST EN 16069:2013+A1:2015 - Thermal insulation products for buildings - Factory made products of polyethylene foam (PEF) - Specification
• Effective Date: 06-Sep-2017

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 16069:2013+A1:2015/oprA2:2018
01-november-2018
Toplotnoizolacijski proizvodi za stavbe - Proizvodi iz polietilenske pene (PEF) -
Specifikacija
Thermal insulation products for buildings - Factory made products of polyethylene foam
(PEF) - Specification
Wärmedämmstoffe für Gebäude - Werkmäßig hergestellte Produkte aus
Polyethylenschaum (PEF) - Spezifikation
Produits isolants thermiques pour le bâtiment - Produits manufacturés en mousse de
polyethylene (PEF) - Spécification
Ta slovenski standard je istoveten z: EN 16069:2012+A1:2015/prA2
ICS:
91.100.60 0DWHULDOL]DWRSORWQRLQ Thermal and sound insulating
]YRþQRL]RODFLMR materials
SIST EN en,fr,de
16069:2013+A1:2015/oprA2:2018
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 16069:2013+A1:2015/oprA2:2018

---------------------- Page: 2 ----------------------

SIST EN 16069:2013+A1:2015/oprA2:2018


DRAFT
EUROPEAN STANDARD
EN 16069:2012+A1:2015
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA2
September 2018
ICS 91.100.60
English Version

Thermal insulation products for buildings - Factory made
products of polyethylene foam (PEF) - Specification
Produits isolants thermiques pour le bâtiment - Wärmedämmstoffe für Gebäude - Werkmäßig
Produits manufacturés en mousse de polyethylene hergestellte Produkte aus Polyethylenschaum (PEF) -
(PEF) - Spécification Spezifikation
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 88.

This draft amendment A2, if approved, will modify the European Standard EN 16069:2012+A1:2015. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 16069:2012+A1:2015/prA2:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 16069:2013+A1:2015/oprA2:2018
EN 16069:2012+A1:2015/prA2:2018 (E)
Contents Page
European foreword . 3
1 Modification to the European foreword . 4
2 Modifications to the Scope . 5
3 Modification to Clause 2, Normative references . 5
4 Modification to 3.1, Terms and definitions . 5
5 Modification to 3.2.2, Abbreviated terms used in this European Standard . 5
6 Modification to Clause 4, Requirements . 5
7 Modification to 4.1, General . 5
8 Modificationt o 4.3.13, Release of dangerous substances . 5
9 Modification to 4.3.15, Continuous glowing combustion . 5
10 Modification to 5.3.2, Thermal resistance and thermal conductivity . 6
11 Modification to Clause 6, Designation Code . 7
12 Modification to Clause 7, Assessment and Verification of the Constancy of
Performance (AVCP) . 7
13 Modification to Annex B, Product type determination (PTD) and factory production
control (FPC) . 8
14 Modification to C.2, Requirements . 12
15 Modification to E.10, Peel strength . 12
16 Modification to Annex ZA, Clauses of this European Standard addressing the
provisions of the EU Construction Products Regulation . 12

2

---------------------- Page: 4 ----------------------

SIST EN 16069:2013+A1:2015/oprA2:2018
EN 16069:2012+A1:2015/prA2:2018 (E)
European foreword
This document (EN 16069:2012+A1:2015/prA2:2018) has been prepared by Technical Committee
CEN/TC 88 Thermal insulating materials and products”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
For relationship with EU Regulations, see informative Annex ZA which is an integral part of this
document.
3

---------------------- Page: 5 ----------------------

SIST EN 16069:2013+A1:2015/oprA2:2018
EN 16069:2012+A1:2015/prA2:2018 (E)
1 Modification to the European foreword
In the seventh paragraph, delete ", and supports essential requirements of EU Directive(s).".
Replace the ninth and tenth paragraphs with the following:
"Amendment A2 modifies EN 16069:2012 and its A1 amendment. This amendment introduces or
corrects:
a) Modified the clause "Release of Dangerous substance";
b) Modified the definition for "class F" in the clause "reaction to fire";
c) Editorial modifications in different parts of the text and linked to the above modification;
d) Modifications to be in line with the CPR, e.g. PTD replaced by TT ;
e) Modified the Annex ZA.".
After the eleventh paragraph, add the following paragraphs:
"In pursuance of Resolution BT 20/1993 revised, CEN/TC 88 have proposed defining the standards
listed below as a package of documents.
The package of standards comprises the following group of interrelated standards for the specifications
of factory made thermal insulation products, all of which come within the scope of CEN/TC 88:
EN 13162, Thermal insulation products for buildings — Factory made mineral wool (MW) products —
Specification
EN 13163, Thermal insulation products for buildings — Factory made expanded polystyrene (EPS)
products — Specification
EN 13164, Thermal insulation products for buildings — Factory made extruded polystyrene foam (XPS)
products — Specification
EN 13165, Thermal insulation products for buildings — Factory made rigid polyurethane foam (PU)
products — Specification
EN 13166, Thermal insulation products for buildings — Factory made phenolic foam (PF) products —
Specification
EN 13167, Thermal insulation products for buildings — Factory made cellular glass (CG) products —
Specification
EN 13168, Thermal insulation products for buildings — Factory made wood wool (WW) products —
Specification
EN 13169, Thermal insulation products for buildings — Factory made expanded perlite board (EPB)
products — Specification
EN 13170, Thermal insulation products for buildings — Factory made products of expanded cork (ICB) —
Specification
EN 13171, Thermal insulation products for buildings — Factory made wood fibre (WF) products —
Specification
EN 16069, Thermal insulation products for buildings — Factory made products of polyethylene foam
(PEF) — Specification".
4

---------------------- Page: 6 ----------------------

SIST EN 16069:2013+A1:2015/oprA2:2018
EN 16069:2012+A1:2015/prA2:2018 (E)
2 Modifications to the Scope
In the first paragraph, replace the word "requirements" with "characteristics".
In the second paragraph, replace the term "evaluation of conformity" with "assesment and verification of
constancy of performance (AVCP)".
3 Modification to Clause 2, Normative references
Add the following reference:
"EN 16516, Construction products — Assessment of release of dangerous substances — Determination of
emissions into indoor air"
4 Modification to 3.1, Terms and definitions
Delete the terms "3.1.2 level" and "3.1.3 class" and renumber the remaining terms accordingly.
5 Modification to 3.2.2, Abbreviated terms used in this European Standard
Add the following abbreviated terms:
"
TT is Type testing (previously named ITT for Initial Type Test)
CWFT is Classification without further testing
".
Delete the abbreviated terms "PTD" and "VCP".
6 Modification to Clause 4, Requirements
In the title of the clause, replace the term "Requirements" with "Characteristics".
7 Modification to 4.1, General
Throughout the subclause, replace the term "requirements" with "characteristics".
8 Modificationt o 4.3.13, Release of dangerous substances
Replace the text in the clause with the following:
1)
"If the release of dangerous substances into indoor air is tested, this shall be done according to
EN 16516.
NOTE An informative database covering European and national provisions on dangerous substances is
available at the Construction web site on EUROPA accessed through: http://ec.europa.eu/growth/tools-
databases/cp-ds.".
9 Modification to 4.3.15, Continuous glowing combustion
Delete the clause.

1) See for reference the LCI list of the European Commission "Agreed EU-LCI values"
(http://ec.europa.eu/growth/sectors/construction/eu-lci/values_en).
5

---------------------- Page: 7 ----------------------

SIST EN 16069:2013+A1:2015/oprA2:2018
EN 16069:2012+A1:2015/prA2:2018 (E)
10 Modification to 5.3.2, Thermal resistance and thermal conductivity
Replace Table 6 with the following:
"Table 6 — Test methods, test specimens and conditions
Dimensions in millimetres
Clause Minimum
Test specimen
number of
Length and
Specific
Test method measurements to
a
width conditions
No. Title
get one test

result
Thermal resistance and EN 12667 or See EN 12667 or
b
4.2.1 1
See
thermal conductivity EN 12939 EN 12939
4.2.2 Length, width EN 822 Full size 1 —
4.2.3 Thickness EN 823 Full size 1 100 Pa
4.2.4 Squareness EN 824 Full size 1 —
4.2.5 Flatness EN 825 Full size 1 —
Reaction to fire of the
See Clause 5 of
4.2.6 product as placed on the See EN 13501-1 and EN 15715
EN 15715:2009
market
EN 1603 Full-size 3 –
4.3.2 Dimensional stability
200 × 200 or Full-
EN 1604 3 –
size
Compressive stress
4.3.3. EN 826 100 × 100 3 —
Compressive strength
Tensile strength and
As defined in type
4.3.4 elongation in length and EN ISO 1798 5 —
1 of EN ISO 1798
width direction
4.3.5 Point load EN 12430 300 × 300 3 –
4.3.6 Compressive creep EN 1606 100 × 100 3 —
Long term water absorption Total: method 2 B
4.3.7. EN 12087 200 × 200 3
by immersion Partial: method 1A
See 6.1 in
4.3.8. Water vapour transmission EN 12086 3 Set A
EN 12086:1997
4.3.9 Dynamic stiffness EN 29052-1 200 × 200 3 —
4.3.10.2 Thickness, d EN 12431
L
120 s
4.3.10.3 Thickness, d EN 12431
B
200 × 200 3
4.3.10.5 Long term thickness EN 1606
Level CP2
reduction
2
4.3.11 Sound absorption EN ISO 354 Minimum 10 m 1 To be reported
Width, length of preformed
EN 822 Full size 1 —
products
4.3.12

Thickness of preformed
EN 823 Full size 1 Load of 100 Pa
products
6

---------------------- Page: 8 ----------------------

SIST EN 16069:2013+A1:2015/oprA2:2018
EN 16069:2012+A1:2015/prA2:2018 (E)
Clause Minimum
Test specimen
number of
Length and
Specific
Test method measurements to
a
width conditions
No. Title
get one test

result
Release of dangerous
4.3.13 EN 16516 See EN 16516 See EN 16516 See EN 16516
substances
Reaction to fire of the
product in standardized
4.3.14 See EN 13501-1 and EN 15715
assemblies simulating end- See Clause 6 of
use applications EN 15715:2009
a
Full-size product thickness except for 4.3.14 and except when the limits of the test methods are exceeded.
b
The level of remaining hydrocarbon gas should be determined with a gas chromatograph following approved
laboratory methods. Literature reference – S. Lohmeyer, G. Müller: “Determination of the cell gas amount and
composition in polyurethane foams”; Journal for cooling technic and air conditioning (Kältetechnik Klimatisierung),
22nd year, volume 3, (1970), pp 291–295.
".
11 Modification to Clause 6, Designation Code
Replace the first sentence by the following:
"If a designation code is provided, the following shall be included except when there is no requirement
for a property described in 4.3:".
12 Modification to Clause 7, Assessment and Verification of the Constancy of
Performance (AVCP)
Replace the subclauses with the following:
"7.1 General
The manufacturer or his authorized representative shall be responsible for the conformity of his
product with the requirements of this European Standard. The Assessment and Verification of
Constancy of Performance (AVCP) shall be carried out in accordance with EN 13172 and shall be based
on Type testing (TT), Factory Production Control (FPC) by the manufacturer, including product
assessment and tests on samples taken at the factory.
The compliance of the product with the requirements of this standard and with the stated values
(including classes) shall be demonstrated by:
— Type testing (TT),
— Factory Production Control (FPC) by the manufacturer, including product assessment.
If a manufacturer decides to group his products, it shall be done in accordance with EN 13172.
7.2 Type testing (TT)
All characteristics defined in 4.2 and those in 4.3 if declared, shall be subject to Type testing (TT) in
accordance with Annex B.
For the relevant characteristics, TT on products corresponding also to EN 14313 may be used for the
purpose of TT and Declaration of Performance (DoP) according to this standard.
7

---------------------- Page: 9 ----------------------

SIST EN 16069:2013+A1:2015/oprA2:2018
EN 16069:2012+A1:2015/prA2:2018 (E)
7.3 Factory Production Control (FPC)
The manufacturer shall establish, document and maintain an FPC system to ensure that the products
placed on the market comply with the declared performance of the essential characteristics.
The minimum frequencies of tests in the factory production control (FPC) shall be in accordance with
Annex B. When indirect testing is used, the correlation to direct testing shall be established in
accordance with EN 13172.
For the relevant characteristics, FPC on products corresponding also to EN 14313 may be used for the
purpose of FPC and DoP according to this standard.
7.4 Initial inspection
The initial inspection of the factory and of FPC shall be done in accordance with EN 13172
7.5 Continuous surveillance
The continuous surveillance of FPC shall be done in accordance with EN 13172.".
13 Modification to Annex B, Product type determination (PTD) and factory
production control (FPC)
Replace the title of the Annex B with: "Type testing and factory product
...