kSIST FprEN IEC 60384-1-1:2022
(Main)Fixed capacitors for use in electronic equipment - Part 1-1 : Generic blank detail specification
Fixed capacitors for use in electronic equipment - Part 1-1 : Generic blank detail specification
Festkondensatoren zur Verwendung in Geräten der Elektronik – Teil 1-1: Allgemeiner Vordruck für Bauartspezifikation
Condensateurs fixes utilisés dans les équipements électroniques - Partie 1-1: Spécification particulière-cadre générique
Fiksni kondenzatorji za elektronsko opremo - 1-1. del: Splošna okvirna podrobna specifikacija
General Information
Standards Content (sample)
SLOVENSKI STANDARD
oSIST prEN IEC 60384-1-1:2022
01-februar-2022
Fiksni kondenzatorji za elektronsko opremo - 1-1. del: Splošna okvirna podrobna
specifikacija
Fixed capacitors for use in electronic equipment - Part 1-1 : Generic blank detail
specificationTa slovenski standard je istoveten z: prEN IEC 60384-1-1:2021
ICS:
31.060.10 Fiksni kondenzatorji Fixed capacitors
oSIST prEN IEC 60384-1-1:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------oSIST prEN IEC 60384-1-1:2022
---------------------- Page: 2 ----------------------
oSIST prEN IEC 60384-1-1:2022
40/2888/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60384-1-1 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2021-11-19 2022-02-11
SUPERSEDES DOCUMENTS:
40/2840/CD, 40/2873/CC
IEC TC 40 : CAPACITORS AND RESISTORS FOR ELECTRONIC EQUIPMENT
SECRETARIAT: SECRETARY:
Netherlands Mr Ronald Drenthen
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if any,
in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel votingThe attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for
Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which
they are aware and to provide supporting documentation.TITLE:
Fixed capacitors for use in electronic equipment – Part 1-1 : Generic blank detail specification
PROPOSED STABILITY DATE: 2032NOTE FROM TC/SC OFFICERS:
Copyright © 2021 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.---------------------- Page: 3 ----------------------
oSIST prEN IEC 60384-1-1:2022
IEC CDV 60384-1-1 Ed.1 IEC:202X – 2 – 40/2888/CDV
1 CONTENTS
3 FOREWORD ........................................................................................................................... 4
4 INTRODUCTION ..................................................................................................................... 6
5 Scope ..................................................................................................................................... 9
6 Normative references .............................................................................................................. 9
7 Terms and definitions ............................................................................................................. 9
8 Ratings and characteristics ..................................................................................................... 9
9 4.1 General ................................................................................................................... 9
10 4.2 Dimensions ............................................................................................................. 9
11 4.3 Climatic category and ratings ................................................................................ 10
12 4.4 Capacitance range, tolerances and rated voltage .................................................. 11
13 Tests, test severities and performance requirements ............................................................ 11
14 5.1 General ................................................................................................................. 11
15 5.2 Visual inspection and check of dimensions ........................................................... 11
16 5.3 Electrical tests and measurements ........................................................................ 12
17 5.4 Robustness of terminations ................................................................................... 12
18 5.5 Tests related to component assembly ................................................................... 12
19 5.6 Rapid change of temperature ................................................................................ 12
20 5.7 Vibration ............................................................................................................... 12
21 5.8 Shock ................................................................................................................... 12
22 5.9 Climatic sequence ................................................................................................ 12
23 5.10 Damp heat, steady state ....................................................................................... 12
24 5.11 Endurance ............................................................................................................ 12
25 5.12 Further tests related to specific component technology (if applicable) ................... 12
26 5.13 Tests related to safety (if applicable) .................................................................... 12
27 Marking, packaging and ordering information ........................................................................ 12
28 6.1 Marking ................................................................................................................. 12
29 6.1.1 Marking of the component ............................................................................. 12
30 6.1.2 Marking of the packaging ............................................................................... 12
31 6.2 Packaging ............................................................................................................. 12
32 6.3 Ordering information ............................................................................................. 12
33 Additional information ........................................................................................................... 13
34 7.1 General ................................................................................................................. 13
35 7.2 Storage and transportation .................................................................................... 13
36 7.3 Substrate for assembly ......................................................................................... 13
37 7.4 Soldering process ................................................................................................. 13
38 7.5 Use of cleaning agents or solvents........................................................................ 13
39 7.6 Coating or potting after assembly .......................................................................... 13
40 Quality assessment procedures ............................................................................................ 13
41 8.1 General ................................................................................................................. 13
42 8.1.1 100% test ...................................................................................................... 13
43 8.1.2 Certificate of Conformity (CoC) ...................................................................... 14
44 8.1.3 Certified test records of released lots ............................................................ 14
45 8.2 Qualification approval ........................................................................................... 14
46 8.3 Maintenance of a qualification approval ................................................................ 14
47 8.3.1 Quality conformance inspection ..................................................................... 14
---------------------- Page: 4 ----------------------oSIST prEN IEC 60384-1-1:2022
IEC CDV 60384-1-1 Ed.1 IEC:202X – 3 – 40/2888/CDV
48 8.3.2 Non-conforming item ..................................................................................... 14
49 Annex A (normative) Symbols and abbreviated terms ......................................................... 17
50 A.1 Symbols ................................................................................................................ 17
51 A.2 Abbreviated terms ................................................................................................. 17
52 Annex B (normative) Reference for visual inspection ........................................................... 18
53 Bibliography .......................................................................................................................... 19
55 Figure 1 – Outline and dimensions ........................................................................................ 10
57 Table 1 – Case size and dimensions ..................................................................................... 10
58 Table 2 – Climatic categories ................................................................................................ 10
59 Table 3 – Ratings ................................................................................................................. 11
60 Table 4 – Temperature coefficients, tolerances and capacitance ranges for climatic
61 category … / … / … .............................................................................................................. 11
62 Table 5 – Test schedule for a qualification approval (Template) ............................................ 15
63 Table 6 – Test schedule for quality conformance inspection (Template) ................................ 16
---------------------- Page: 5 ----------------------oSIST prEN IEC 60384-1-1:2022
IEC CDV 60384-1-1 Ed.1 IEC:202X – 4 – 40/2888/CDV
67 INTERNATIONAL ELECTROTECHNICAL COMMISSION
68 ____________
70 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT–
72 Part 1-1: Generic blank detail specification
75 FOREWORD
76 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
77 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
78 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
79 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
80 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
81 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
82 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
83 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
84 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
85 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
86 consensus of opinion on the relevant subjects since each technical committee has representation from all
87 interested IEC National Committees.88 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
89 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
90 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
91 misinterpretation by any end user.92 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
93 transparently to the maximum extent possible in their national and regional publications. Any divergence between
94 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
95 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
96 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
97 services carried out by independent certification bodies.98 6) All users should ensure that they have the latest edition of this publication.
99 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
100 members of its technical committees and IEC National Committees for any personal injury, property damage or
101 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
102 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
103 Publications.104 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
105 indispensable for the correct application of this publication.106 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
107 rights. IEC shall not be held responsible for identifying any or all such patent rights.
108 IEC 60384-1-1 has been prepared IEC technical committee 40: Capacitors and resistors for
109 electronic equipment. It is an International Standard.110 The text of this International Standard is based on the following documents:
Draft Report on voting
XX/XX/FDIS XX/XX/RVD
111
112 Full information on the voting for its approval can be found in the report on voting indicated in
113 the above table.114 The language used for the development of this International Standard is English.
115 This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
116 accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
117 at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
118 described in greater detail at www.iec.ch/standardsdev/publications.---------------------- Page: 6 ----------------------
oSIST prEN IEC 60384-1-1:2022
IEC CDV 60384-1-1 Ed.1 IEC:202X – 5 – 40/2888/CDV
119 The committee has decided that the contents of this document will remain unchanged until the
120 stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
121 the specific document. At this date, the document will be122 • reconfirmed,
123 • withdrawn,
124 • replaced by a revised edition, or
125 • amended.
---------------------- Page: 7 ----------------------
oSIST prEN IEC 60384-1-1:2022
IEC CDV 60384-1-1 Ed.1 IEC:202X – 6 – 40/2888/CDV
126 INTRODUCTION
127 This introduction is not intended to be copied into the drafted detail specification. Therefore, it
128 is positioned in front of the conventional document structure and clause numbering range. It
129 nevertheless contains normative requirements to the drafted detail specification.
130 Scope of this generic blank detail specification131 This part of IEC 60384-1 is applicable to the drafting of detail specifications for fixed capacitors
132 for use in electronic equipment.133 Function of this generic blank detail specification
134 This generic blank detail specification is a supplementary document to the sectional
135 specifications and contains requirements for style, layout and minimum contents of detail
136 specifications. Detail specifications not complying with these requirements shall not be
137 considered as being in accordance with IEC specifications nor shall they be described as such.
138 The detail specification should contain a table of contents prior to the first page of the actual
139 specification.140 In the preparation of the detail specification, the relevant content of the related sectional
141 specification IEC 60384-X shall be taken into account.142 Units, graphical symbols and letter symbols should be chosen, wherever possible, from the
143 various parts of the IEC 60027 series, the ISO 80000 series and ISO/IEC Guide 99.:
144 This blank detail specification uses for its purpose two different kinds of notes:
145 – NOTE For notes which give additional information intended to assist the understanding or use
146 of the resulting document and therefore shall be copied as NOTE into the drafted detail
147 specification. As outlined in the ISO/IEC directives, these notes shall not contain any
148 requirement, instruction, recommendation or permission.149 – COMMENT For editorial notes which are intended to aid and direct the specification writer
150 and therefore shall not be copied into the drafted detail specification. In order to accomplish
151 their function, editorial notes require the use of instructions, recommendations and permissions
152 addressed to the writer of the detail specification.153 Identification of the detail specification and the capacitor
154 The first page of the detail specification should have a layout starting with a title block as
155 recommended on the following page.156 The numbers in square brackets are editorial references, which are not intended to be copied
157 into the drafted detail specification, and which correspond to the following information on the
158 contents which shall be inserted in the indicated positions.159 [1] "International Electrotechnical Commission" or the name of the standardization organization
160 under whose authority the detail specification is published and, if applicable, the organization
161 from whom the detail specification is available.162 [2] The number allocated to the detail specification by the IEC or by the responsible
163 standardisation organisation, together with the date of issue and issue number, as applicable.
164 Further reference details required by the responsible standardisation organisation or quality
165 assessment system may be given here, including an established mark of conformity, as
166 applicable.167 [3] The number and issue date and number, as applicable, of the relevant generic specification,
168 sectional specification and blank detail specification, where the referenced issues shall be the
169 most recent issues of the respective specifications.170 [4] The title of the detail specification, providing a short description of the type of capacitors.
171 This entry should support the discrimination between similar specifications and should be
---------------------- Page: 8 ----------------------oSIST prEN IEC 60384-1-1:2022
IEC CDV 60384-1-1 Ed.1 IEC:202X – 7 – 40/2888/CDV
172 suitable for an entry in a register of approvals or in a catalogue of standards. It may duplicate
173 information given in the textual scope in Clause 1.174 [5] An outline drawing or illustration of the products. This entry should aid the easy recognition
175 of the capacitors and, if possible, support the discrimination between similar specifications. It
176 may duplicate information given in Figure 1.177 [6] Information on the typical construction of the capacitors (where applicable). This entry may
178 duplicate information given in the textual scope in Clause 1.179 [7] The classification level of the capacitors covered by this detail specificati
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.