SIST EN 12085:2013
(Main)Thermal insulating products for building applications - Determination of linear dimensions of test specimens
Thermal insulating products for building applications - Determination of linear dimensions of test specimens
This European Standard specifies the characteristics and choice of measuring equipment and the procedure for determining the linear dimensions of test specimens which are taken from thermal insulating products. The procedures for measuring the dimensions of full size products are specified in EN 822 and EN 823.
Wärmedämmstoffe für das Bauwesen - Bestimmung der linearen Maße von Probekörpern
Diese Norm legt die Leistungsmerkmale und die Auswahl von Messeinrichtungen und das Verfahren zur Bestimmung der linearen Maße von Probekörpern, die aus einem Wärmedämmstoff entnommen wurden, fest. Die Verfahren zur Bestimmung der Maße von Produkten in Liefermaßen sind in EN 822 und EN 823 beschrieben.
Produits isolants thermiques destinés aux applications du bâtiment - Détermination des dimensions linéaires des éprouvettes d'essai
La présente Norme européenne spécifie les caractéristiques et le choix de l'équipement de mesure, ainsi que le mode opératoire permettant de déterminer les dimensions linéaires des éprouvettes prélevées sur les produits isolants thermiques. Les modes opératoires pour mesurer les dimensions des produits en vraies dimensions sont définis dans l'EN 822 et l'EN 823.
Toplotnoizolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje linearnih dimenzij preskušancev
Ta evropski standard določa karakteristike in izbiro merilne opreme ter postopek za ugotavljanje linearnih dimenzij preskušancev iz toplotnoizolacijskih proizvodov. Postopki za merjenje dimenzij proizvodov naravne velikosti so navedeni v standardih EN 822 in EN 823.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Toplotnoizolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje linearnih dimenzij preskušancevWärmedämmstoffe für das Bauwesen - Bestimmung der linearen Maße von ProbekörpernProduits isolants thermiques destinés aux applications du bâtiment - Détermination des dimensions linéaires des éprouvettes d'essaiThermal insulating products for building applications - Determination of linear dimensions of test specimens91.100.60Thermal and sound insulating materialsICS:Ta slovenski standard je istoveten z:EN 12085:2013SIST EN 12085:2013en,fr,de01-julij-2013SIST EN 12085:2013SLOVENSKI
STANDARDSIST EN 12085:19991DGRPHãþD
SIST EN 12085:2013
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12085
March 2013 ICS 91.100.60 Supersedes EN 12085:1997English Version
Thermal insulating products for building applications - Determination of linear dimensions of test specimens
Produits isolants thermiques destinés aux applications du bâtiment - Détermination des dimensions linéaires des éprouvettes
Wärmedämmstoffe für das Bauwesen - Bestimmung der linearen Maße von Probekörpern This European Standard was approved by CEN on 15 December 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12085:2013: ESIST EN 12085:2013
EN 12085:2013 (E) 2 Contents Page Foreword . 3 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 5 4 Principle. 5 5 Apparatus . 5 6 Test specimens . 6 7 Procedure . 6 8 Calculation and expression of results . 8 9 Accuracy of measurement . 8 10 Test report . 8 Bibliography. 9
SIST EN 12085:2013
EN 12085:2013 (E) 3 Foreword This document (EN 12085:2013) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2013, and conflicting national standards shall be withdrawn at the latest by September 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12085:1997.
The revision of this standard contains no major changes, only minor corrections and clarifications of an editorial nature. This European Standard is one of a series of standards which specify test methods for determining dimensions and properties of thermal insulating materials and products. It supports a series of product standards for thermal insulating materials and products which derive from the Council Directive of 21 December 1988 on the approximation of laws, regulations and administrative provisions of the Member States relating to construction products (Directive 89/106/EEC) through the consideration of the essential requirements. This European Standard has been drafted for applications in buildings but it may also be used in other areas where it is relevant. This European test standard is one of the following group of inter-related standards on test methods for determining dimensions and properties of thermal insulation materials and products, all of which fall within the scope of CEN/TC 88: EN 822, Thermal insulating products for building applications — Determination of length and width EN 823, Thermal insulating products for building applications — Determination of thickness EN 824, Thermal insulating products for building applications — Determination of squareness EN 825, Thermal insulating products for building applications — Determination of flatness EN 826, Thermal insulating products for building applications — Determination of compression behaviour EN 1602, Thermal insulating products for building applications — Determination of the apparent density EN 1603, Thermal insulating products for building applications — Determination of dimensional stability under constant normal laboratory conditions (23 °C/50 % relative humidity) EN 1604, Thermal insulating products for building applications — Determination of dimensional stability under specified temperature and humidity conditions EN 1605, Thermal insulating products for building applications — Determination of deformation under specified compressive load and temperature conditions EN 1606, Thermal insulating products for building applications — Determination of compressive creep SIST EN 12085:2013
EN 12085:2013 (E) 4 EN 1607, Thermal insulating products for building applications — Determination of tensile strength perpendicular to faces EN 1608, Thermal insulating products for building applications — Determination of tensile strength parallel to faces EN 1609, Thermal insulating products for building applications — Determination of short-term water absorption by partial immersion EN 12085, Thermal insulating products for building applications — Determination of linear dimensions of test specimens EN 12086, Thermal insulating products for building applications — Determination of water vapour transmission properties EN 12087, Thermal insulating products for building applications — Determination of long-term water absorption by immersion EN 12088, Thermal insulating products for building applications — Determination of long-term water absorption by diffusion EN 12089, Thermal insulating products for building applications — Determination of bending behaviour EN 12090, Thermal insulating products for building applications — Determination of shear behaviour EN 12091, Thermal insulating products for building applications — Determination of freeze-thaw resistance EN 12429, Thermal insulating products for building applications — Conditioning to moisture equilibrium under specified temperature and humidity conditions EN 12430, Thermal insulating products for build
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Toplotnoizolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje linearnih dimenzij preskušancevWärmedämmstoffe für das Bauwesen - Bestimmung der linearen Maße von ProbekörpernProduits isolants thermiques destinés aux applications du bâtiment - Détermination des dimensions linéaires des éprouvettes d'essaiThermal insulating products for building applications - Determination of linear dimensions of test specimens91.100.60Thermal and sound insulating materialsICS:Ta slovenski standard je istoveten z:FprEN 12085kSIST FprEN 12085:2012en,fr,de01-september-2012kSIST FprEN 12085:2012SLOVENSKI
STANDARD
kSIST FprEN 12085:2012
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 12085
June 2012 ICS 91.100.60 Will supersede EN 12085:1997English Version
Thermal insulating products for building applications - Determination of linear dimensions of test specimens
Produits isolants thermiques destinés aux applications du bâtiment - Détermination des dimensions linéaires des éprouvettes d'essai
Wärmedämmstoffe für das Bauwesen - Bestimmung der linearen Maße von Probekörpern This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee CEN/TC 88.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 12085:2012: EkSIST FprEN 12085:2012
FprEN 12085:2012 (E) 2 Contents Page Foreword .31Scope .52Normative references .53Terms and definitions .54Principle .55Apparatus .56Test specimens .67Procedure .68Calculation and expression of results .89Accuracy of measurement .810Test report .8Bibliography .9 kSIST FprEN 12085:2012
FprEN 12085:2012 (E) 3 Foreword This document (FprEN 12085:2012) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This document is currently submitted to the Unique Acceptance Procedure. This document will supersede EN 12085:1997.
The revision of this standard contains no major changes only minor corrections and clarifications of editorial nature. This European Standard is one of a series of standards which specify test methods for determining dimensions and properties of thermal insulating materials and products. It supports a series of product standards for thermal insulating materials and products which derive from the Council Directive of 21 December 1988 on the approximation of laws, regulations and administrative provisions of the Member States relating to construction products (Directive 89/106/EEC) through the consideration of the essential requirements. This European Standard has been drafted for applications in buildings but it may also be used in other areas where it is relevant. This EN test standard is one of the following group of inter-related standards on test methods for determining dimensions and properties of thermal insulation materials and products, all of which come within the scope of CEN/TC 88: EN 822, Thermal insulating products for building applications — Determination of length and width EN 823, Thermal insulating products for building applications — Determination of thickness EN 824, Thermal insulating products for building applications — Determination of squareness EN 825, Thermal insulating products for building applications — Determination of flatness EN 826, Thermal insulating products for building applications — Determination of compression behaviour EN 1602, Thermal insulating products for building applications — Determination of the apparent density EN 1603, Thermal insulating products for building applications — Determination of dimensional stability under constant normal laboratory conditions (23 °C/50 % relative humidity) EN 1604, Thermal insulating products for building applications — Determination of dimensional stability under specified temperature and humidity conditions EN 1605, Thermal insulating products for building applications — Determination of deformation under specified compressive load and temperature conditions EN 1606, Thermal insulating products for building applications — Determination of compressive creep EN 1607, Thermal insulating products for building applications — Determination of tensile strength perpendicular to faces EN 1608, Thermal insulating products for building applications — Determination of tensile strength parallel to faces kSIST FprEN 12085:2012
FprEN 12085:2012 (E) 4 EN 1609, Thermal insulating products for building applications — Determination of short term water absorption by partial immersion EN 12085, Thermal insulating products for building applications — Determination of linear dimensions of test specimens EN 12086, Thermal insulating products for building applications — Determination of water vapour transmission properties EN 12087, Thermal insulating products for building applications — Determination of long term water absorption by immersion EN 12088, Thermal insulating products for building applications — Determination of long term water absorption by diffusion EN 12089, Thermal insulating products for building applications — Determination of bending behaviour EN 12090, Thermal insulating products for building applications — Determination of shear behaviour EN 12091, Thermal insulating products for
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.