SIST EN 301 489-17 V1.3.2:2008
Electromagnetic compatibility and Radio spectrum Matters (ERM) - ElectroMagnetic Compatibility (EMC) standard for radio equipment - Part 17: Specific conditions for 2,4 GHz wideband transmission systems, 5 GHz high performance RLAN equipment and 5,8 GHz Broadband Data Transmitting Systems
Electromagnetic compatibility and Radio spectrum Matters (ERM) - ElectroMagnetic Compatibility (EMC) standard for radio equipment - Part 17: Specific conditions for 2,4 GHz wideband transmission systems, 5 GHz high performance RLAN equipment and 5,8 GHz Broadband Data Transmitting Systems
To consider changes to EN 301 489-17 which may be required to accomodate 5.8GHz Broadband DataTransmitting systems that are covered by the draft harmonised standard EN 302 502. Change title to reflect the addition of the new equipment. Align with latest changes to EN 301 489-1.
Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) - Standard elektromagnetne združljivosti (EMC) za radijsko opremo - 17. del: Posebni pogoji za širokopasovne prenosne sisteme na frekvenci 2,4 GHz, visokozmogljivo opremo RLAN na frekvenci 5 GHz in širokopasovne sisteme za prenos podatkov na frekvenci 5,8 GHz
General Information
Relations
Buy Standard
Standards Content (Sample)
ETSI EN 301 489-17 V1.3.2 (2008-04)
Harmonized European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC)
standard for radio equipment;
Part 17: Specific conditions for 2,4 GHz
wideband transmission systems,
5 GHz high performance RLAN equipment and
5,8 GHz Broadband Data Transmitting Systems
---------------------- Page: 1 ----------------------
2 ETSI EN 301 489-17 V1.3.2 (2008-04)
Reference
REN/ERM-EMC-248-17
Keywords
EMC, HIPERLAN, LAN, radio, regulation
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2008.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
---------------------- Page: 2 ----------------------
3 ETSI EN 301 489-17 V1.3.2 (2008-04)
Contents
Intellectual Property Rights.5
Foreword.5
1 Scope.6
2 References.6
2.1 Normative references.6
2.2 Informative references.7
3 Definitions and abbreviations.7
3.1 Definitions.7
3.2 Abbreviations.8
4 Test conditions .8
4.1 General.8
4.2 Arrangements for test signals .8
4.2.1 Arrangements for test signals at the input of transmitters.8
4.2.2 Arrangements for test signals at the output of transmitters.8
4.2.3 Arrangements for test signals at the input of receivers .8
4.2.4 Arrangements for test signals at the output of receivers .9
4.2.5 Arrangements for testing transmitter and receiver together (as a system) .9
4.3 Exclusion bands.9
4.3.1 2,45 GHz RLAN equipment .9
4.3.2 5 GHz RLAN equipment .9
4.3.3 5,8 GHz Broadband data transmitting systems .9
4.4 Narrow band responses on receivers or receivers which are part of transceivers.10
4.5 Normal test modulation.10
5 Performance assessment.10
5.1 General.10
5.2 Arrangements for the assessment of host dependant equipment and plug-in cards.10
5.2.1 Alternative A: composite equipment .10
5.2.2 Alternative B: use of a test jig or host.11
5.3 Assessment procedures.11
5.4 Ancillary equipment.11
5.5 Equipment classification.11
6 Performance criteria .11
6.1 General performance criteria.11
6.2 Performance table.12
6.3 Performance criteria for Continuous phenomena applied to Transmitters (CT) .12
6.4 Performance criteria for Transient phenomena applied to Transmitters (TT).12
6.5 Performance criteria for Continuous phenomena applied to Receivers (CR).13
6.6 Performance criteria for Transient phenomena applied to Receivers (TR) .13
7 Applicability overview.13
7.1 Emission.13
7.1.1 General.13
7.1.2 Special conditions.13
7.2 Immunity.13
7.2.1 General.13
7.2.2 Special conditions.13
Annex A (informative): Examples of radio equipment in the scope of the present document .14
A.1 Wideband transmission systems operating in the 2,4 GHz ISM band using spread spectrum
techniques.14
A.2 Radio Local Area Networks equipment operating in the 5 GHz frequency band.14
ETSI
---------------------- Page: 3 ----------------------
4 ETSI EN 301 489-17 V1.3.2 (2008-04)
A.3 Broadband Data Transmitting Systems operating in the band 5 725 MHz to 5 875 MHz.14
Annex B (informative): The EN title in the official languages .15
Annex C (informative): Bibliography.17
History .18
ETSI
---------------------- Page: 4 ----------------------
5 ETSI EN 301 489-17 V1.3.2 (2008-04)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [3] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Council Directive 1999/5/EC [2] of the European
Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the
mutual recognition of their conformity ("the R&TTE Directive").
The present document is part 17 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].
National transposition dates
Date of adoption of this EN: 11 April 2008
Date of latest announcement of this EN (doa): 31 July 2008
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 January 2009
Date of withdrawal of any conflicting National Standard (dow): 31 July 2010
ETSI
---------------------- Page: 5 ----------------------
6 ETSI EN 301 489-17 V1.3.2 (2008-04)
1 Scope
The present document, together with EN 301 489-1 [1], covers the assessment of the 2,4 GHz wideband transmission
systems and 5 GHz high performance RLAN (including HIPERLAN 1 and 2 and other) including Broadband Data
Transmitting System equipment, in respect of ElectroMagnetic Compatibility (EMC).
Technical specifications related to the antenna port and emissions from the enclosure port of the radio equipment are
not included in the present document. Such technical specifications are found in the relevant product standards for the
effective use of the radio spectrum.
The present document specifies the applicable test conditions, performance assessment and performance criteria for
wideband data communication systems.
Examples of types of wide band data communications systems covered by the present document are given in annex A.
In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present
document and EN 301 489-1 [1], the provisions of the present document take precedence.
The environmental classification and the emission and immunity requirements used in the present document are as
stated in EN 301 489-1 [1], except for any special conditions included in the present document.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• Non-specific reference may be made only to a complete document or a part thereof and only in the following
cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the
purposes of the referring document;
- for informative references.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
For online referenced documents, information sufficient to identify and locate the source shall be provided. Preferably,
the primary source of the referenced document should be cited, in order to ensure traceability. Furthermore, the
reference should, as far as possible, remain valid for the expected life of the document. The reference shall include the
method of access to the referenced document and the full network address, with the same punctuation and use of upper
case and lower case letters.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are indispensable for the application of the present document. For dated
references, only the edition cited applies. For non-specific references, the latest edition of the referenced document
(including any amendments) applies.
[1] ETSI EN 301 489-1 (V1.7.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
Part 1: Common technical requirements".
ETSI
---------------------- Page: 6 ----------------------
7 ETSI EN 301 489-17 V1.3.2 (2008-04)
2.2 Informative references
The following referenced documents are not essential to the use of the present document but they assist the user with
regard to a particular subject area. For non-specific references, the latest version of the referenced document (including
any amendments) applies.
[2] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio
equipment and telecommunications terminal equipment and the mutual recognition of their
conformity (R&TTE Directive).
[3] Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a
procedure for the provision of information in the field of technical standards and regulations.
[4] ETSI EN 300 328-1: "Electromagnetic compatibility and Radio Spectrum Matters (ERM);
Wideband Transmission systems; Data transmission equipment operating in the 2,4 GHz ISM
band and using spread spectrum modulation techniques; Part 1: Technical characteristics and test
conditions".
[5] ETSI EN 301 893: "Broadband Radio Access Networks (BRAN); 5 GHz high performance
RLAN; Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive".
[6] ETSI EN 302 502: "Broadband Radio Access Networks (BRAN); 5,8 GHz fixed broadband data
transmitting systems; Harmonized EN covering the essential requirements of article 3.2 of the
R&TTE Directive".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in EN 301 489-1 [1], clause 3 and the
following apply:
Equipment Under Test (EUT): equipment under test and subject to the performance requirements of the present
document
fixed station: equipment intended for use in a fixed location and fitted with one or more antennas
NOTE: The equipment may be fitted with either antenna socket(s) or integral antenna(s) or both.
hand-portable station: equipment normally used on a stand-alone basis and to be carried by a person
NOTE: The equipment may be fitted with one or more antennas. The equipment may be fitted with either antenna
socket(s) or integral antenna(s) or both.
host: any equipment which has complete user functionality when not connected to the radio equipment part and to
which the radio equipment part provides additional functionality and to which connection is necessary for the radio
equipment part to offer functionality
plug-in radio device: equipment, including slide-in radio cards, intended to be used with or within a variety of host
systems, using their control functions and power supply
stand-alone radio equipment: equipment that is intended primarily as communications equipment and that is normally
used on a stand-alone basis
ETSI
---------------------- Page: 7 ----------------------
8 ETSI EN 301 489-17 V1.3.2 (2008-04)
3.2 Abbreviations
For the purposes of the present document, the following abbreviations apply:
ACK ACKnowledgement
ARQ Automatic Retransmission reQuest
CR Continuous phenomena applied to Receivers
CT Continuous phenomena applied to Transmitters
EMC ElectroMagnetic Compatibility
EUT Equipment Under Test
HIPERLAN HIgh PErformance Radio Local Area Network
MUS Maximum Usable Sensitivity
NACK Not ACKnowledgement
RF Radio Frequency
TR Transient phenomena applied to Receivers
TT Transient phenomena applied to Transmitters
4 Test conditions
4.1 General
For the purposes of the present document, the test conditions of EN 301 489-1 [1], clause 4, shall apply as appropriate.
Further product related test conditions for wideband data communications systems are specified in clauses 4.2 to 4.5.
The radio equipment may take forms which may require special software and/or test fixtures. Equipment which requires
connection to a host equipment to function shall use the test configuration as defined by the manufacturer. In all cases
the EUT shall be exercised in a manner representative of normal intended use.
4.2 Arrangements for test signals
The provisions of EN 301 489-1 [1], clause 4.2 shall apply.
4.2.1 Arrangements for test signals at the input of transmitters
The provisions of EN 301 489-1 [1], clause 4.2.1 shall apply with the following modifications.
The wanted signals and/or controls required to establish a communications link shall be defined by the manufacturer.
The transmitter shall be operated at maximum rated power.
4.2.2 Arrangements for test signals at the output of transmitters
The provisions of EN 301 489-1 [1], clause 4.2.2 shall apply with the following modifications.
The manufacturer may provide a suitable companion receiver that can be used to receive messages or to set up a
communication link.
4.2.3 Arrangements for test signals at the input of receivers
The provisions of EN 301 489-1 [1], clause 4.2.3 shall apply with the following modifications.
The wanted signals required to establish a communications link shall be defined by the manufacturer.
The level of the wanted signal at the input of the receiver shall be at least 30 dB above the declared Maximum Usable
Sensitivity (MUS).
ETSI
---------------------- Page: 8 ----------------------
9 ETSI EN 301 489-17 V1.3.2 (2008-04)
4.2.4 Arrangements for test signals at the output of receivers
The measuring equipment for the output signal from the receiver under test shall be locate
...
Final draft ETSI EN 301 489-17 V1.3.2 (2008-02)
Harmonized European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC)
standard for radio equipment;
Part 17: Specific conditions for 2,4 GHz
wideband transmission systems,
5 GHz high performance RLAN equipment and
5,8 GHz Broadband Data Transmitting Systems
---------------------- Page: 1 ----------------------
2 Final draft ETSI EN 301 489-17 V1.3.2 (2008-02)
Reference
REN/ERM-EMC-248-17
Keywords
EMC, HIPERLAN, LAN, radio, regulation
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2008.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
---------------------- Page: 2 ----------------------
3 Final draft ETSI EN 301 489-17 V1.3.2 (2008-02)
Contents
Intellectual Property Rights.5
Foreword.5
1 Scope.6
2 References.6
2.1 Normative references.6
2.2 Informative references.7
3 Definitions and abbreviations.7
3.1 Definitions.7
3.2 Abbreviations.7
4 Test conditions .8
4.1 General.8
4.2 Arrangements for test signals .8
4.2.1 Arrangements for test signals at the input of transmitters.8
4.2.2 Arrangements for test signals at the output of transmitters.8
4.2.3 Arrangements for test signals at the input of receivers .8
4.2.4 Arrangements for test signals at the output of receivers .8
4.2.5 Arrangements for testing transmitter and receiver together (as a system) .9
4.3 Exclusion bands.9
4.3.1 2,45 GHz RLAN equipment .9
4.3.2 5 GHz RLAN equipment .9
4.3.3 5,8 GHz Broadband data transmitting systems .9
4.4 Narrow band responses on receivers or receivers which are part of transceivers.9
4.5 Normal test modulation.9
5 Performance assessment.10
5.1 General.10
5.2 Arrangements for the assessment of host dependant equipment and plug-in cards.10
5.2.1 Alternative A: composite equipment .10
5.2.2 Alternative B: use of a test jig or host.10
5.3 Assessment procedures.11
5.4 Ancillary equipment.11
5.5 Equipment classification.11
6 Performance criteria .11
6.1 General performance criteria.11
6.2 Performance table.12
6.3 Performance criteria for Continuous phenomena applied to Transmitters (CT) .12
6.4 Performance criteria for Transient phenomena applied to Transmitters (TT).12
6.5 Performance criteria for Continuous phenomena applied to Receivers (CR).13
6.6 Performance criteria for Transient phenomena applied to Receivers (TR) .13
7 Applicability overview.13
7.1 Emission.13
7.1.1 General.13
7.1.2 Special conditions.13
7.2 Immunity.13
7.2.1 General.13
7.2.2 Special conditions.13
Annex A (informative): Examples of radio equipment in the scope of the present document .14
A.1 Wideband transmission systems operating in the 2,4 GHz ISM band using spread spectrum
techniques.14
A.2 Radio Local Area Networks equipment operating in the 5 GHz frequency band.14
ETSI
---------------------- Page: 3 ----------------------
4 Final draft ETSI EN 301 489-17 V1.3.2 (2008-02)
A.3 Broadband Data Transmitting Systems operating in the band 5 725 MHz to 5 875 MHz.14
Annex B (informative): The EN title in the official languages .15
Annex C (informative): Bibliography.16
History .17
ETSI
---------------------- Page: 4 ----------------------
5 Final draft ETSI EN 301 489-17 V1.3.2 (2008-02)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM), and is now submitted for the Vote phase of the
ETSI standards Two-step Approval Procedure.
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [3] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Council Directive 1999/5/EC [2] of the European
Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the
mutual recognition of their conformity ("the R&TTE Directive").
The present document is part 17 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 24 months after doa
ETSI
---------------------- Page: 5 ----------------------
6 Final draft ETSI EN 301 489-17 V1.3.2 (2008-02)
1 Scope
The present document, together with EN 301 489-1 [1], covers the assessment of the 2,4 GHz wideband transmission
systems and 5 GHz high performance RLAN (including HIPERLAN 1 and 2 and other) including Broadband Data
Transmitting System equipment, in respect of ElectroMagnetic Compatibility (EMC).
Technical specifications related to the antenna port and emissions from the enclosure port of the radio equipment are
not included in the present document. Such technical specifications are found in the relevant product standards for the
effective use of the radio spectrum.
The present document specifies the applicable test conditions, performance assessment and performance criteria for
wideband data communication systems.
Examples of types of wide band data communications systems covered by the present document are given in annex A.
In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present
document and EN 301 489-1 [1], the provisions of the present document take precedence.
The environmental classification and the emission and immunity requirements used in the present document are as
stated in EN 301 489-1 [1], except for any special conditions included in the present document.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• Non-specific reference may be made only to a complete document or a part thereof and only in the following
cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the
purposes of the referring document;
- for informative references.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
For online referenced documents, information sufficient to identify and locate the source shall be provided. Preferably,
the primary source of the referenced document should be cited, in order to ensure traceability. Furthermore, the
reference should, as far as possible, remain valid for the expected life of the document. The reference shall include the
method of access to the referenced document and the full network address, with the same punctuation and use of upper
case and lower case letters.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are indispensable for the application of the present document. For dated
references, only the edition cited applies. For non-specific references, the latest edition of the referenced document
(including any amendments) applies.
[1] ETSI EN 301 489-1 (V1.7.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
Part 1: Common technical requirements".
ETSI
---------------------- Page: 6 ----------------------
7 Final draft ETSI EN 301 489-17 V1.3.2 (2008-02)
2.2 Informative references
[2] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio
equipment and telecommunications terminal equipment and the mutual recognition of their
conformity (R&TTE Directive).
[3] Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a
procedure for the provision of information in the field of technical standards and regulations.
[4] ETSI EN 300 328-1: "Electromagnetic compatibility and Radio Spectrum Matters (ERM);
Wideband Transmission systems; Data transmission equipment operating in the 2,4 GHz ISM
band and using spread spectrum modulation techniques; Part 1: Technical characteristics and test
conditions".
[5] ETSI EN 301 893: "Broadband Radio Access Networks (BRAN); 5 GHz high performance
RLAN; Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive".
[6] ETSI EN 302 502: "Broadband Radio Access Networks (BRAN); 5,8 GHz fixed broadband data
transmitting systems; Harmonized EN covering the essential requirements of article 3.2 of the
R&TTE Directive".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in EN 301 489-1 [1], clause 3 and the
following apply:
Equipment Under Test (EUT): equipment under test and subject to the performance requirements of the present
document
fixed station: equipment intended for use in a fixed location and fitted with one or more antennas
NOTE: The equipment may be fitted with either antenna socket(s) or integral antenna(s) or both.
hand-portable station: equipment normally used on a stand-alone basis and to be carried by a person
NOTE: The equipment may be fitted with one or more antennas. The equipment may be fitted with either antenna
socket(s) or integral antenna(s) or both.
host: any equipment which has complete user functionality when not connected to the radio equipment part and to
which the radio equipment part provides additional functionality and to which connection is necessary for the radio
equipment part to offer functionality
plug-in radio device: equi
...
SLOVENSKI STANDARD
SIST EN 301 489-17 V1.3.2:2008
01-september-2008
Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) -
Standard elektromagnetne združljivosti (EMC) za radijsko opremo - 17. del:
Posebni pogoji za širokopasovne prenosne sisteme na frekvenci 2,4 GHz,
visokozmogljivo opremo RLAN na frekvenci 5 GHz in širokopasovne sisteme za
prenos podatkov na frekvenci 5,8 GHz
Electromagnetic compatibility and Radio spectrum Matters (ERM) - ElectroMagnetic
Compatibility (EMC) standard for radio equipment - Part 17: Specific conditions for 2,4
GHz wideband transmission systems, 5 GHz high performance RLAN equipment and 5,8
GHz Broadband Data Transmitting Systems
Ta slovenski standard je istoveten z: EN 301 489-17 Version 1.3.2
ICS:
33.060.01 Radijske komunikacije na Radiocommunications in
splošno general
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
SIST EN 301 489-17 V1.3.2:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 301 489-17 V1.3.2:2008
---------------------- Page: 2 ----------------------
SIST EN 301 489-17 V1.3.2:2008
ETSI EN 301 489-17 V1.3.2 (2008-04)
Harmonized European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC)
standard for radio equipment;
Part 17: Specific conditions for 2,4 GHz
wideband transmission systems,
5 GHz high performance RLAN equipment and
5,8 GHz Broadband Data Transmitting Systems
---------------------- Page: 3 ----------------------
SIST EN 301 489-17 V1.3.2:2008
2 ETSI EN 301 489-17 V1.3.2 (2008-04)
Reference
REN/ERM-EMC-248-17
Keywords
EMC, HIPERLAN, LAN, radio, regulation
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2008.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
---------------------- Page: 4 ----------------------
SIST EN 301 489-17 V1.3.2:2008
3 ETSI EN 301 489-17 V1.3.2 (2008-04)
Contents
Intellectual Property Rights.5
Foreword.5
1 Scope.6
2 References.6
2.1 Normative references.6
2.2 Informative references.7
3 Definitions and abbreviations.7
3.1 Definitions.7
3.2 Abbreviations.8
4 Test conditions .8
4.1 General.8
4.2 Arrangements for test signals .8
4.2.1 Arrangements for test signals at the input of transmitters.8
4.2.2 Arrangements for test signals at the output of transmitters.8
4.2.3 Arrangements for test signals at the input of receivers .8
4.2.4 Arrangements for test signals at the output of receivers .9
4.2.5 Arrangements for testing transmitter and receiver together (as a system) .9
4.3 Exclusion bands.9
4.3.1 2,45 GHz RLAN equipment .9
4.3.2 5 GHz RLAN equipment .9
4.3.3 5,8 GHz Broadband data transmitting systems .9
4.4 Narrow band responses on receivers or receivers which are part of transceivers.10
4.5 Normal test modulation.10
5 Performance assessment.10
5.1 General.10
5.2 Arrangements for the assessment of host dependant equipment and plug-in cards.10
5.2.1 Alternative A: composite equipment .10
5.2.2 Alternative B: use of a test jig or host.11
5.3 Assessment procedures.11
5.4 Ancillary equipment.11
5.5 Equipment classification.11
6 Performance criteria .11
6.1 General performance criteria.11
6.2 Performance table.12
6.3 Performance criteria for Continuous phenomena applied to Transmitters (CT) .12
6.4 Performance criteria for Transient phenomena applied to Transmitters (TT).12
6.5 Performance criteria for Continuous phenomena applied to Receivers (CR).13
6.6 Performance criteria for Transient phenomena applied to Receivers (TR) .13
7 Applicability overview.13
7.1 Emission.13
7.1.1 General.13
7.1.2 Special conditions.13
7.2 Immunity.13
7.2.1 General.13
7.2.2 Special conditions.13
Annex A (informative): Examples of radio equipment in the scope of the present document .14
A.1 Wideband transmission systems operating in the 2,4 GHz ISM band using spread spectrum
techniques.14
A.2 Radio Local Area Networks equipment operating in the 5 GHz frequency band.14
ETSI
---------------------- Page: 5 ----------------------
SIST EN 301 489-17 V1.3.2:2008
4 ETSI EN 301 489-17 V1.3.2 (2008-04)
A.3 Broadband Data Transmitting Systems operating in the band 5 725 MHz to 5 875 MHz.14
Annex B (informative): The EN title in the official languages .15
Annex C (informative): Bibliography.17
History .18
ETSI
---------------------- Page: 6 ----------------------
SIST EN 301 489-17 V1.3.2:2008
5 ETSI EN 301 489-17 V1.3.2 (2008-04)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [3] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Council Directive 1999/5/EC [2] of the European
Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the
mutual recognition of their conformity ("the R&TTE Directive").
The present document is part 17 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].
National transposition dates
Date of adoption of this EN: 11 April 2008
Date of latest announcement of this EN (doa): 31 July 2008
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 January 2009
Date of withdrawal of any conflicting National Standard (dow): 31 July 2010
ETSI
---------------------- Page: 7 ----------------------
SIST EN 301 489-17 V1.3.2:2008
6 ETSI EN 301 489-17 V1.3.2 (2008-04)
1 Scope
The present document, together with EN 301 489-1 [1], covers the assessment of the 2,4 GHz wideband transmission
systems and 5 GHz high performance RLAN (including HIPERLAN 1 and 2 and other) including Broadband Data
Transmitting System equipment, in respect of ElectroMagnetic Compatibility (EMC).
Technical specifications related to the antenna port and emissions from the enclosure port of the radio equipment are
not included in the present document. Such technical specifications are found in the relevant product standards for the
effective use of the radio spectrum.
The present document specifies the applicable test conditions, performance assessment and performance criteria for
wideband data communication systems.
Examples of types of wide band data communications systems covered by the present document are given in annex A.
In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present
document and EN 301 489-1 [1], the provisions of the present document take precedence.
The environmental classification and the emission and immunity requirements used in the present document are as
stated in EN 301 489-1 [1], except for any special conditions included in the present document.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• Non-specific reference may be made only to a complete document or a part thereof and only in the following
cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the
purposes of the referring document;
- for informative references.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
For online referenced documents, information sufficient to identify and locate the source shall be provided. Preferably,
the primary source of the referenced document should be cited, in order to ensure traceability. Furthermore, the
reference should, as far as possible, remain valid for the expected life of the document. The reference shall include the
method of access to the referenced document and the full network address, with the same punctuation and use of upper
case and lower case letters.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are indispensable for the application of the present document. For dated
references, only the edition cited applies. For non-specific references, the latest edition of the referenced document
(including any amendments) applies.
[1] ETSI EN 301 489-1 (V1.7.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
Part 1: Common technical requirements".
ETSI
---------------------- Page: 8 ----------------------
SIST EN 301 489-17 V1.3.2:2008
7 ETSI EN 301 489-17 V1.3.2 (2008-04)
2.2 Informative references
The following referenced documents are not essential to the use of the present document but they assist the user with
regard to a particular subject area. For non-specific references, the latest version of the referenced document (including
any amendments) applies.
[2] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio
equipment and telecommunications terminal equipment and the mutual recognition of their
conformity (R&TTE Directive).
[3] Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a
procedure for the provision of information in the field of technical standards and regulations.
[4] ETSI EN 300 328-1: "Electromagnetic compatibility and Radio Spectrum Matters (ERM);
Wideband Transmission systems; Data transmission equipment operating in the 2,4 GHz ISM
band and using spread spectrum modulation techniques; Part 1: Technical characteristics and test
conditions".
[5] ETSI EN 301 893: "Broadband Radio Access Networks (BRAN); 5 GHz high performance
RLAN; Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive".
[6] ETSI EN 302 502: "Broadband Radio Access Networks (BRAN); 5,8 GHz fixed broadband data
transmitting systems; Harmonized EN covering the essential requirements of article 3.2 of the
R&TTE Directive".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in EN 301 489-1 [1], clause 3 and the
following apply:
Equipment Under Test (EUT): equipment under test and subject to the performance requirements of the present
document
fixed station: equipment intended for use in a fixed location and fitted with one or more antennas
NOTE: The equipment may be fitted with either antenna socket(s) or integral antenna(s) or both.
hand-portable station: equipment normally used on a stand-alone basis and to be carried by a person
NOTE: The equipment may be fitted with one or more antennas. The equipment may be fitted with either antenna
socket(s) or integral antenna(s) or both.
host: any equipment which has complete user functionality when not connected to the radio equipment part and to
which the radio equipment part provides additional functionality and to which connection is necessary for the radio
equipment part to offer functionality
plug-in radio device: equipment, including slide-in radio cards, intended to be used with or within a variety of host
systems, using their control functions and power supply
stand-alone radio equipment: equipment that is intended primarily as communications equipment and that is normally
used on a stand-alone basis
ETSI
---------------------- Page: 9 ----------------------
SIST EN 301 489-17 V1.3.2:2008
8 ETSI EN 301 489-17 V1.3.2 (2008-04)
3.2 Abbreviations
For the purposes of the present document, the following abbreviations apply:
ACK ACKnowledgement
ARQ Automatic Retransmission reQuest
CR Continuous phenomena applied to Receivers
CT Continuous phenomena applied to Transmitters
EMC ElectroMagnetic Compatibility
EUT Equipment Under Test
HIPERLAN HIgh PErformance Radio Local Area Network
MUS Maximum Usable Sensitivity
NACK Not ACKnowledgement
RF Radio Frequency
TR Transient phenomena applied to Receivers
TT Transient phenomena applied to Transmitters
4 Test conditions
4.1 General
For the purposes of the present document, the test conditions of EN 301 489-1 [1], clause 4, shall apply as appropriate.
Further product related test conditions for wideband data communications systems are specified in clauses 4.2 to 4.5.
The radio equipment may take forms which may require special software and/or test fixtures. Equipment which requires
connection to a host equipment to function shall use the test configuration as defined by the manufacturer. In all cases
the EUT shall be exercised in a manner representative of normal intended use.
4.2 Arrangements for test signals
The provisions of EN 301 489-1 [1], clause 4.2 shall apply.
4.2.1 Arrangements for test signals at the input of transmitters
The provisions of EN 301 489-1 [1], clause 4.2.1 shall apply with the following modifications.
The wanted signals and/or controls required to establish a communications link shall be defined by the manufacturer.
The transmitter shall be operated at maximum rated power.
4.2.2 Arrangements for test signals at the output of transmitters
The provisions of EN 301 489-1 [1], clause 4.2.2 shall apply with the following modifications.
The manufacturer may provide a suitable companion receiver that can be used to receive messages or to set up a
communication link.
4.2.3 Arrangements for test signals at the input of receivers
The provisions of
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.