SIST EN 4013:2005

Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1 550 MPa (at ambient temperature) / 600 °C

This standard specifies the characteristics of self-locking, shank nuts, in NI-PH2601, silver plated, for aerospace applications.
Classification: 1 550 MPa  ) / 600 °C  )

Luft- und Raumfahrt - Einnietmuttern, selbstsichernd, aus hochwarmfester Nickelbasislegierung NI-PH2601 (Inconel 718), versilbert - Klasse: 1 550 MPa (bei Raumtemperatur) / 600 °C

Diese Norm legt die Eigenschaften von selbstsichernden Einnietmuttern aus NI PH2601, versilbert, für Anwen¬dungen in der Luft  und Raumfahrt fest.
Klasse: 1 550 MPa ) / 600 °C )

Série aérospatiale - Écrous a sertir, a freinage interne, en alliage résistant a chaud a base de nickel NI-PH2601 (Inconel 718), argentés - Classification : 1 550 MPa (a température ambiante ) / 600 °C

Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1 550 MPa (at ambient temperature) / 600 °C

General Information

• Status: Withdrawn
• Publication Date: 31-May-2005
• Withdrawal Date: 07-Aug-2024
• ICS: 49.030.30 - Nuts
• Technical Committee: SS SPL - Technical Board for the general field
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 08-Aug-2024
• Due Date: 31-Aug-2024
• Completion Date: 08-Aug-2024
• Ref Project: EN 4013:2004 - Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1 550 MPa (at ambient temperature) / 600 °C

Relations

• Replaces: SIST EN 4013:2004 - Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1 550 MPa (at ambient temperature)/600°C
• Effective Date: 01-Jun-2005
• Replaced By: SIST EN 4013:2024 - Aerospace series - Shank nut, self-locking, in heat resisting nickel base alloy NI PH2601 (Inconel 718), silver plated - Classification: 1 550 MPa (at ambient temperature)/600 °C
• Effective Date: 31-Jan-2018

Standards Content (Sample)

SLOVENSKI STANDARD
01-junij-2005
1DGRPHãþD
SIST EN 4013:2004
Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-
PH2601 (Inconel 718), silver plated - Classification: 1 550 MPa (at ambient
temperature) / 600 °C
Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-
PH2601 (Inconel 718), silver plated - Classification: 1 550 MPa (at ambient
temperature) / 600 °C
Luft- und Raumfahrt - Einnietmuttern, selbstsichernd, aus hochwarmfester
Nickelbasislegierung NI-PH2601 (Inconel 718), versilbert - Klasse: 1 550 MPa (bei
Raumtemperatur) / 600 °C
Série aérospatiale - Écrous a sertir, a freinage interne, en alliage résistant a chaud a
base de nickel NI-PH2601 (Inconel 718), argentés - Classification : 1 550 MPa (a
température ambiante ) / 600 °C
Ta slovenski standard je istoveten z: EN 4013:2004
ICS:
49.030.30 Matice Nuts
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 4013
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2004
ICS 49.030.30 Supersedes EN 4013:2003
English version
Aerospace series - Shank nuts, self-locking, in heat resisting
nickel base alloy NI-PH2601 (Inconel 718), silver plated -
Classification: 1 550 MPa (at ambient temperature) / 600° C
Série aérospatiale - Écrous à sertir, à freinage interne, en Luft- und Raumfahrt - Einnietmuttern, selbstsichernd, aus
alliage résistant à chaud à base de nickel NI-PH2601 hochwarmfester Nickelbasislegierung NI-PH2601 (Inconel
(Inconel 718), argentés - Classification : 1 550 MPa (à 718), versilbert - Klasse: 1 550 MPa (bei Raumtemperatur)
température ambiante ) / 600° C / 600° C
This European Standard was approved by CEN on 11 September 2003.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4013:2004: E
worldwide for CEN national Members.

Contents                                                                       Page

Foreword.3
1 Scope .4
2 Normative references .4
3 Required characteristics.4
4 Designation .6
5 Marking .6
6 Technical specification .6
--------------------
...