SIST EN 4610:2006

Aerospace series - Pipe coupling 8° 30' in titanium alloy - Elbows 45°, with thrust wire nut

This standard specifies the characteristics of elbows 45°, with thrust wire nut, for pipe couplings 8°30', in titanium alloy, for aerospace applications.
Nominal pressure: up to 28 000 kPa.
Temperature range: - 55 °C to 135 °C.

Luft- und Raumfahrt - Rohrverschraubung 8° 30' aus Titanlegierung - Winkelverschraubungen 45°, mit Mutter mit Schubdraht

Diese Norm legt die Eigenschaften von Winkelverschraubungen 45° mit Mutter mit Schubdraht, für Rohrverschraubungen 8°30', aus Titanlegierung, zur Verwendung in der Luft  und Raumfahrt fest.
Nenndruck: bis 28 000 kPa
Temperaturbereich: ? 55 °C bis 135 °C

Série aérospatiale - Systeme de raccordement 8° 30' en alliage de titane - Raccords coudés a 45°, avec écrou a jonc

Aeronavtika – Cevni priključek 8° 30' iz titanove zlitine – Kotni cevni priključek 45° z matico s potisno žico

General Information

• Status: Published
• Publication Date: 31-Aug-2006
• ICS: 49.080 - Aerospace fluid systems and components
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Sep-2006
• Due Date: 01-Sep-2006
• Completion Date: 01-Sep-2006
• Ref Project: EN 4610:2005 - Aerospace series - Pipe coupling 8° 30' in titanium alloy - Elbows 45°, with thrust wire nut

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Pipe coupling 8° 30' in titanium alloy - Elbows 45°, with thrust wire nutSérie aérospatiale - Systeme de raccordement 8° 30' en alliage de titane - Raccords coudés a 45°, avec écrou a joncLuft- und Raumfahrt - Rohrverschraubung 8° 30' aus Titanlegierung - Winkelverschraubungen 45°, mit Mutter mit SchubdrahtTa slovenski standard je istoveten z:EN 4610:2005SIST EN 4610:2006en49.080ICS:SLOVENSKI
STANDARDSIST EN 4610:200601-september-2006







EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4610
November 2005 ICS 49.080 English Version
Aerospace series - Pipe coupling 8° 30' in titanium alloy - Elbows 45°, with thrust wire nut
Série aérospatiale - Système de raccordement 8° 30' en alliage de titane - Raccords coudés à 45°, avec écrou à jonc
Luft- und Raumfahrt - Rohrverschraubung 8° 30' aus Titanlegierung -Winkelverschraubungen 45°, mit Mutter mit Schubdraht This European Standard was approved by CEN on 28 October 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2005 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4610:2005:E



EN 4610:2005 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Required characteristics.5 4 Designation.7 5 Marking.8 6 Technical specification.8



EN 4610:2005 (E) 3 Foreword This European Standard (EN 4610:2005) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2006, and conflicting national standards shall be withdrawn at the latest by May 2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, No
...