Telecommunications and Internet Protocol Harmonization Over Networks (TIPHON) Release 3; End-to-end Quality of Service in TIPHON systems; Part 3: Signalling and control of end-to-end Quality of Service (QoS)

Enhancement for: A signalling mechanism for achieving TIPHON Quality of Service (QoS) levels

Harmonizacija telekomunikacij in internetnega protokola prek omrežij (TIPHON), 3. izdaja - Kakovost storitve od konca do konca v sistemih TIPHON - 3. del: Signalizacija in krmiljenje kakovosti storitve (QoS) od konca do konca

General Information

Status
Published
Publication Date
31-Mar-2004
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Apr-2004
Due Date
01-Apr-2004
Completion Date
01-Apr-2004

Buy Standard

Technical specification
TS TS 101 329-3 V2.1.2:2004
English language
45 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS TS 101 329-3 V2.1.2:2004
01-april-2004
Harmonizacija telekomunikacij in internetnega protokola prek omrežij (TIPHON), 3.
izdaja - Kakovost storitve od konca do konca v sistemih TIPHON - 3. del:
Signalizacija in krmiljenje kakovosti storitve (QoS) od konca do konca
Telecommunications and Internet Protocol Harmonization Over Networks (TIPHON)
Release 3; End-to-end Quality of Service in TIPHON systems; Part 3: Signalling and
control of end-to-end Quality of Service (QoS)
Ta slovenski standard je istoveten z: ETSI TS 101 329-3 V2.1.2 (2002-01)
ICS:
33.040.30 Komutacijski in signalizacijski Switching and signalling
sistem systems
SIST-TS TS 101 329-3 V2.1.2:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS TS 101 329-3 V2.1.2:2004

---------------------- Page: 2 ----------------------

SIST-TS TS 101 329-3 V2.1.2:2004

ETSI TS 101 329-3 V2.1.2 (2002-01)
Technical Specification


Telecommunications and Internet Protocol
Harmonization Over Networks (TIPHON) Release 3;
End-to-end Quality of Service in TIPHON systems;
Part 3: Signalling and control of end-to-end
Quality of Service (QoS)

---------------------- Page: 3 ----------------------

SIST-TS TS 101 329-3 V2.1.2:2004
 2 ETSI TS 101 329-3 V2.1.2 (2002-01)



Reference
RTS/TIPHON-05003 [2]a
Keywords
internet, network, interoperability, protocol, QoS,
telephony, IP, quality, service, signalling
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, send your comment to:
editor@etsi.fr
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2002.
All rights reserved.

ETSI

---------------------- Page: 4 ----------------------

SIST-TS TS 101 329-3 V2.1.2:2004
 3 ETSI TS 101 329-3 V2.1.2 (2002-01)
Contents
Intellectual Property Rights.5
Foreword.5
Introduction .6
1 Scope.7
2 References.7
3 Definitions and abbreviations.7
3.1 Definitions.7
3.2 Abbreviations.8
4 Void.9
5 QoS architecture.9
5.1 TIPHON architectural planes .9
5.1.1 IP telephony application plane.9
5.1.2 IP transport plane.9
5.1.3 Management plane.9
5.2 Service and transport domains.10
5.2.1 Void.10
5.2.2 Void.10
5.2.3 End-to-end QoS control .10
5.2.3.1 IP application plane control.10
5.2.3.2 Transport plane control .11
5.3 QoS Functional Elements.12
5.3.1 QoS Service Manager (QoSM).12
5.3.2 QoS Policy Element (QoSPE) .12
5.3.3 Transport Resource Manager (TRM).12
5.3.4 Transport Policy Entity (TPE) .12
5.3.5 Interconnect Function (ICF).12
5.3.6 Transport Function (TF) .12
5.3.7 Relationship between functional entities .13
5.4 QoS reference points .13
5.4.1 Reference point QC1 .13
5.4.2 Reference point QC2 .13
5.4.3 Reference point QS4.13
5.4.4 Reference point QT2.13
5.4.5 Reference point QT1.14
5.4.6 Reference point QI1.14
5.4.7 Reference point QI2.14
5.4.8 Reference point QI3.14
5.4.9 Reference point QI4.14
5.4.10 Reference point QI5.14
6 Characterizing QoS.14
6.1 Service, application and transport level QoS parameters .14
6.2 Interfacing to the Transport Plane .15
6.2.1 Transport QoS parameters .16
6.2.2 Traffic descriptor.17
7 Allocating the QoS budget across service and transport domains.17
7.1 Dynamic signalling of Transport QoS Parameters .18
7.2 Specification of transport QoS parameters in Service Level Agreements (SLA).18
7.3 Aggregation.19
7.3.1 Aggregation under control of the TRM .19
7.3.2 Aggregation under control of the QoSM .19
8 QoS Primitives.20
ETSI

---------------------- Page: 5 ----------------------

SIST-TS TS 101 329-3 V2.1.2:2004
 4 ETSI TS 101 329-3 V2.1.2 (2002-01)
8.1 QoS Primitives.20
8.1.1 QC1and2.20
8.1.2 QS4.21
8.1.3 QT2.21
8.1.4 QT1.21
8.1.5 QI1.22
8.1.6 QI2.22
8.1.7 QI3.22
8.1.8 QI4.23
8.1.9 QI5.23
8.2 QoS Parameters Groups .24
8.2.1 QoS parameter groups.24
8.2.2 QC1.25
8.2.3 QC2.25
8.2.4 QS4.25
8.2.5 QT2.26
8.2.6 QT1.26
8.2.7 QI1.26
8.2.8 QI2.26
8.2.9 QI3.27
8.2.10 QI4.27
8.2.11 QI5.27
9 QoS Procedures (Informational) .27
9.1 Third Party Establishment of QoS Controlled Bearer .27
9.2 First Party Establishment of QoS Controlled Bearer.30
9.3 Hybrid Third Party/First Party Establishment of QoS controlled bearer via authorization tokens.33
9.4 Terminal Registration.36
Annex A (informative): Examples of end-to-end QoS control.37
A.1 One service domain/One transport domain .37
A.2 One service domains/multiple transport domains - Case I.38
A.3 One service domain/multiple transport domains - Case II .39
A.4 Multiple service domains/multiple transport domains .40
A.5 Multiple service domains/multiple transport domains .40
A.6 Roaming.41
A.7 Provisioned VPN.42
Annex B (informative): Examples of Mapping of QoS Architecture Functional Elements to
Physical Elements .43
Annex C (informative): Bibliography.44
History .45

ETSI

---------------------- Page: 6 ----------------------

SIST-TS TS 101 329-3 V2.1.2:2004
 5 ETSI TS 101 329-3 V2.1.2 (2002-01)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Technical Specification (TS) has been produced by ETSI Project Telecommunications and Internet Protocol
Harmonization Over Networks (TIPHON).
The present document is part 3 of a multi-part deliverable covering End-to-end Quality of Service in TIPHON systems,
as identified below:
TR 101 329-1: "General aspects of Quality of Service (QoS)";
TS 101 329-2: "Definition of speech Quality of Service (QoS) classes";
TS 101 329-3: "Signalling and control of end-to-end Quality of Service (QoS)";
TS 101 329-5: "Quality of Service (QoS) measurement methodologies";
TR 101 329-6: "Actual measurements of network and terminal characteristics and performance parameters in
TIPHON networks and their influence on voice quality";
TR 101 329-7: "Design guide for elements of a TIPHON connection from an end-to-end speech transmission
performance point of view".
Quality of Service aspects of TIPHON Release 4 and 5 Systems will be covered in TS 102 024 and TS 102 025
respectively, and more comprehensive versions of the Release 3 documents listed above will be published as part of
Release 4 and 5 as work progresses.
ETSI

---------------------- Page: 7 ----------------------

SIST-TS TS 101 329-3 V2.1.2:2004
 6 ETSI TS 101 329-3 V2.1.2 (2002-01)
Introduction
The present document forms one of a series of technical specifications and technical reports produced by TIPHON
Working Group 5 addressing Quality of Service (QoS) in TIPHON Systems. The structure of this work is illustrated in
figure 1.
Introduction Definition of 5
Speech Classes
TR 101 329-1 TS 101 329-2
General Speech
QoS
Aspects
of QoS Classes
SPEC
REPORT
Generic QoS
Specific Aspects of QoS
TS 101 329-5 TR 101 329-6 TR 101 329-7
TS 101 329-3
Design
QoS Measure- Actual
Control ment Test Guidelines
Methods Results
REPORT REPORT
SPEC SPEC
Useful info for
QoS signalling Measurement Repository of
requirements methodologies real test results designers

Figure 1: Structure of TIPHON QoS Documentation for Release 3
The present document, describes a framework for the signalling and control of end-to-end Quality of Service in
TIPHON Systems.
ETSI

---------------------- Page: 8 ----------------------

SIST-TS TS 101 329-3 V2.1.2:2004
 7 ETSI TS 101 329-3 V2.1.2 (2002-01)
1 Scope
The present document describes a framework for enabling the end-to-end QoS levels defined in TS 101 329-2 [1] to be
signalled and controlled in TIPHON systems. The mechanisms involved operate between TIPHON terminals, IP
telephony Service Providers (ITSPs), and network transport systems, and provide a flexible means for the dynamic
allocation of QoS parameters across these entities in order to meet the QoS Service Classes defined in TS 101 329-2 [1].
The functional entities involved in the QoS signalling and control are defined, as are the requirements of the reference
points between these functional entities. The QoS parameters and information flows used to establish the required
Service QoS levels are also specified.
The Application Plane mechanisms described in the present document are intended to be independent of the transport
QoS mechanisms used within the underlying IP networks.
The emphasis of the present document is on media QoS (primarily voice, but the mechanisms are also applicable to
other media types). Issues related to performance of the signalling channels are outside the scope of the present
document.
TS 101 314 [2] describes how this QoS framework fits into the overall TIPHON architecture and details of the
signalling involved are described in TS 101 471 [3].
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
[1] ETSI TS 101 329-2: "Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON) Release 3; End-to-end Quality of Service (QoS) in TIPHON systems; Part 2: Definition
of speech Quality of Service (QoS) classes".
[2] ETSI TS 101 314: "Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON); Network architecture and reference configurations; TIPHON Release 2".
[3] ETSI TS 101 471: "Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON); Signalling for calls between an H.323 terminals and terminals in a Switched-Circuit
Network (SCN); Phase III: Scenario 1, 2, 3, and 4".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the following terms and definitions apply:
IP Telephony Service Provider (ITSP): service provider providing IP telephony services
NOTE: The same business entity may act as both a Transport Network Operator and an IP Telephony Service
Provider.
InterConnect Function (ICF): functional entity that interconnects Transport Domains
ETSI

---------------------- Page: 9 ----------------------

SIST-TS TS 101 329-3 V2.1.2:2004
 8 ETSI TS 101 329-3 V2.1.2 (2002-01)
NOTE: It provides a policy and/or administrative boundary and may police authorized media flows between two
Transport Domains to ensure they are consistent with the QoS policy specified by the relevant Transport
Resource Manager
Quality of Service Manager (QoSM): functional entity that mediates requests for end-to-end QoS in accordance with
policy determined by the QoSPE
NOTE: It communicates with, other QoSMs and with TRMs to determine, establish and control the offered QoS.
Quality of Service Policy Element (QoSPE): functional entity that manages IP Telephony QoS policies and provides
authorization of permitted and default QoS levels
NOTE: It receives requests from and issues responses to QoSMs to establish the authorized end-to-end QoS
levels.
service domain: collection of physical or functional entities offering IP telephony services under the control of an IP
telephony service provider which share a consistent set of policies and common technologies
Transport Domain (TD): collection of transport resources sharing a common set of policies, QoS mechanisms and
transport technologies under the control of a transport network operator
transport network: collection of transport resources which provide transport functionality
transport network operator: business entity operating a Transport Network
Transport Policy Entity (TPE): functional entity that maintains the policies of a Transport Domain
Transport Resource Manager (TRM): functional entity that applies a set of policies and mechanisms to a set of
transport resources to ensure that those resources are allocated such that they are sufficient to enable QoS guarantees
across the domain of control of the TRM
Transport Function (TF): functional entity representing the collection of transport resources within a Transport
Domain which are capable of control by a Transport Resource Manager (TRM)
User Equipment (UE): equipment under the control of an End-User
3.2 Abbreviations
For the purposes of the present document, the following abbreviations apply:
ATM Asynchronous Transfer Mode
BC Bearer Control
CBR Constant Bit Rate
DiffServ Differentiated Services
ICF InterConnect Function
IntServ Integrated Services
IP Internet Protocol
ITSP IP Telephony Service Provider
MPLS Multi Protocol Label Switching
QoS Quality of Service
QoSM Quality of Service Manager
QoSPE Quality of Service Policy Element
RMS Root Mean Square
RSVP Resource Reservation Set-up Protocol
RTP Real-time Transport Protocol
SCN Switched Communications Network
SLA Service Level Agreement
TD Transport Domain
TF Transport Function
TPE Transport Policy Element
TRM Transport Resource Manager
UDP User Datagram Protocol
UE User Equipment
VBR Variable Bit Rate
ETSI

---------------------- Page: 10 ----------------------

SIST-TS TS 101 329-3 V2.1.2:2004
 9 ETSI TS 101 329-3 V2.1.2 (2002-01)
VPN Virtual Private Network
4 Void

5 QoS architecture
5.1 TIPHON architectural planes
The Generalized TIPHON Architecture is shown in figure 2 (see TS 101 314 [2]).
SCN Plane
Transport plane
Transport plane
IP Telephony Application Plane
IP Transport Plane

Figure 2: Generalized TIPHON Architecture
End-to-end QoS signalling and control will in general involve QoS information flows in each of the architectural
planes.
The Required end-to-end QoS levels are established within the IP Telephony Application Plane between End-Users and
Service Provider(s). Decisions determining QoS, specific to the application, will take place in the IP Telephony
Application Plane (e.g. codec type, packetization, etc).
The IP Transport Plane (IP Network Operators) provides a QoS service to the Application Plane (Service Providers).
QoS control within the IP Transport Plane is the responsibility of the IP Network Operators.
5.1.1 IP telephony application plane
Within this plane, QoS parameters specific to the application are requested, authorized, signalled, controlled and
accounted.
5.1.2 IP transport plane
Within this plane, general non-application specific parameters effecting QoS must be controlled and accounted to
achieve the QoS requirements requested by the application.
5.1.3 Management plane
Within this plane QoS management entities applicable to both application and transport planes will reside and
information flows applicable to QoS management will terminate.
ETSI
Management Plane

---------------------- Page: 11 ----------------------

SIST-TS TS 101 329-3 V2.1.2:2004
 10 ETSI TS 101 329-3 V2.1.2 (2002-01)
5.2 Service and transport domains
A TIPHON-compliant deployment will in the general case be made up of a number of separate Service and End-User
Domains, each representing the domain of control of an ITSP or End-User. These domains will generally be restricted
to IP Telephony Application plane functionality, e.g. gatekeepers, softswitches, call agents, etc.
Similarly, a TIPHON-compliant system will, in general, also be made up of a number of separate Transport Domains.
Transport Domains consist solely of transport related functionality; this includes IP routers and switches, firewalls, etc.
Each Transport Domain may have its own QoS policies and/or differ from other domains in terms of administrative
control (e.g. Network Operator), QoS mechanisms (RSVP/IntServ, DiffServ, MPLS), access, metering, addressing
schemes (global, local) and transport protocol (IPv4, IPv6), etc.
Since these policies are local, functional entities are needed to interface to other domains. These entities are called
InterConnect Functions.
The general TIPHON deployment is illustrated in figure 3.
5.2.1 Void
5.2.2 Void
5.2.3 End-to-end QoS control
End-to-end QoS control across multiple domains may be achieved in one of two ways:
• by having an IP Telephony Application Service Domain control each Transport Domain. The Service Domain
would request the transport resources with QoS from each of the Transport Domains and establish the
interconnect in a controlled fashion;
• by means of end-to-end signalling within and between Transport Domains which share common policies.
These two mechanisms are explained hereafter.
5.2.3.1 IP application plane control
In this first case, the routing of the call between Transport Domains is under the control of the ITSPs. In this general
case, where the Transport Plane is made up of a number of heterogeneous Transport Domains, each domain may have
its own QoS mechanisms and policies.
Figure 3 illust
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.