iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST HD 323.2.28 S1:2003

(Main)

Basic environmental testing procedures -- Part 2: Tests - Guidance for damp heat tests

Basic environmental testing procedures -- Part 2: Tests - Guidance for damp heat tests

Determines the ability of electrotechnical products to withstand the stresses occurring in a climate of high relative humidity, with or without condensation, with special regard to electrical and mechanical characteristics.

Grundlegende Umweltprüfverfahren -- Teil 2: Prüfungen - Leitfaden für Prüfungen mit feuchter Wärme

Essais fondamentaux climatiques et de robustesse mécanique -- Partie 2: Essais - Guide pour les essais de chaleur humide

Traite de l'aptitude des produits électrotechniques à supporter les contraintes d'un milieu atmosphérique à forte humidité relative, avec ou sans condensation, et plus particulièrement de déterminer les variations de leurs caractéristiques électriques et mécaniques.

Basic environmental testing procedures - Part 2: Tests - Guidance for damp heat tests

General Information

Status
Withdrawn
Publication Date
30-Jun-2003
Withdrawal Date
31-Mar-2005
ICS
19.040 - Environmental testing
Technical Committee
SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Apr-2005
Due Date
01-Apr-2005
Completion Date
01-Apr-2005
Ref Project
HD 323.2.28 S1:1988 - Basic environmental testing procedures - Part 2: Tests - Guidance for damp heat tests

Relations

Replaced By
SIST EN 60068-3-4:2002 - Environmental testing -- Part 3-4: Supporting documentation and guidance - Damp heat tests
Effective Date
06-May-2014
Replaced By
SIST EN 60068-3-4:2002 - Environmental testing -- Part 3-4: Supporting documentation and guidance - Damp heat tests
Effective Date
28-Jan-2023
Replaced By
SIST EN 60068-3-4:2002 - Environmental testing -- Part 3-4: Supporting documentation and guidance - Damp heat tests
Effective Date
07-Jun-2022

Buy Standard

HD 323.2.28 S1:2003HD 323.2.28 S1:2003
PreviousNext
Standardization document
HD 323.2.28 S1:2003
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST HD 323.2.28 S1:2003
01-julij-2003
Basic environmental testing procedures - Part 2: Tests - Guidance for damp heat
tests
Basic environmental testing procedures -- Part 2: Tests - Guidance for damp heat tests
Grundlegende Umweltprüfverfahren -- Teil 2: Prüfungen - Leitfaden für Prüfungen mit
feuchter Wärme
Essais fondamentaux climatiques et de robustesse mécanique -- Partie 2: Essais - Guide
pour les essais de chaleur humide
Ta slovenski standard je istoveten z: HD 323.2.28 S1:1988
ICS:
19.040 Preskušanje v zvezi z Environmental testing
okoljem
SIST HD 323.2.28 S1:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST HD 323.2.28 S1:2003

---------------------- Page: 2 ----------------------

SIST HD 323.2.28 S1:2003

---------------------- Page: 3 ----------------------

SIST HD 323.2.28 S1:2003

---------------------- Page: 4 ----------------------

SIST HD 323.2.28 S1:2003

---------------------- Page: 5 ----------------------

SIST HD 323.2.28 S1:2003

---------------------- Page: 6 ----------------------

SIST HD 323.2.28 S1:2003

---------------------- Page: 7 ----------------------

SIST HD 323.2.28 S1:2003

---------------------- Page: 8 ----------------------

SIS
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 300 019-1-7 V2.1.2:2006(Main)
Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 1-7: Classification of environmental conditions; Portable and non-stationary use
ETSI EN 300 019-1-7 V2.1.2 (2002-04)

The present document defines classes of environmental conditions and their severities to which telecommunication equipment may be exposed. The severities specified are those which will have a low probability of being exceeded; generally less than 1 %. The present document applies to equipment during portable and non-stationary use including periods of transfer, down time, maintenance and repair at locations defined in clauses 3 to 5.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 132-2 V2.1.2:2006(Main)
Environmental Engineering (EE); Power supply interface at the input to telecommunications equipment; Part 2: Operated by direct current (dc)
ETSI EN 300 132-2 V2.1.2 (2003-09)

The present document contains requirements for:
- the output performance of the direct current (dc) power equipment at the interface "A";
- the input of the telecommunications equipment connected to interface "A" powered by dc.
The dc voltage at interface "A" may be derived from the AC primary supply. The dc supply may incorporate a backup battery. If any other equipment e.g. datacom equipment, are connected to interface "A" in parallel to telecommunications equipment, all requirements addressed in clause 4 of the present document must be fulfilled. The present document aims at providing compatibility between the power supply equipment and the power consuming telecommunications equipment, and also between different system blocks connected to the same power supply.
NOTE 1: The present document is applicable only to -48 V dc power supply interfaces. However, during a transitional period, other dc voltages may be used in existing installations. Annex A gives guidance on working in conjunction with existing -60 V dc supply systems.
The power supply interface, interface "A", is a physical point to which all the requirements are related (see figure 1).
This point is situated between the power supply system(s) and the power consuming telecommunications equipment.
NOTE 2: Interface "A" is located at the power terminals of the telecommunications equipment. Subject to the installation preconditions this point may be located at any other point between the power supply system and the telecommunications equipment by mutual agreement of the relevant parties.
The requirements at interface "A" apply to:
- the output of the power supply equipment or power supply installation of telecommunications centres;
- the power supply input of telecommunications equipment installed at telecommunication centres;
- telecommunications equipment, installed in customers' premises, whose dc interface "A" is also used by equipment requiring a supply to this specification.
NOTE 3: Normally there is more than one load unit connected to interface "A". In these cases, interface "A" will undergo further restrictions with respect to noise limits or other disturbances specified in clause 4.8.
NOTE 4: Disturbances on the power supply interface "A" relating to the continuous wave phenomena below 20 kHz are covered within the present document.
NOTE 5: An example of a configuration in which interface "A" is identified is given in annex D.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 019-2-5 V2.1.2:2006(Main)
Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-5: Specification of environmental tests; Ground vehicle installations
ETSI EN 300 019-2-5 V2.1.2 (2001-09)

The present document specifies test methods and severities for the verification of the required resistibility of telecommunication equipment according to the relevant environmental class. The tests in the present document apply to the use of equipment installed permanently or temporarily in ground vehicles and cover the vehicles and the environmental conditions stated in ETS 300 019-1-5 [1]. The tests cover installations in vehicles powered by electric motors and combustion engines. Applications in combustion engine compartments are excluded.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 019-2-7 V3.0.1:2006(Main)
Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-7: Specification of environmental tests; Portable and non-stationary use
ETSI EN 300 019-2-7 V3.0.1 (2003-04)

The present document specifies test methods and severities for the verification of the required resistibility of telecommunication equipment according to the relevant environmental class. The tests defined in the present document apply to portable and non-stationary use of equipment, covering the environments stated in EN 300 019-1-7 [1].

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 253 V2.1.1:2006(Main)
Environmental Engineering (EE); Earthing and bonding of telecommunication equipment in telecommunication centres
ETSI EN 300 253 V2.1.1 (2002-04)

The present document applies in telecommunication centres and similar installations to the bonding network of the building, the bonding network of the equipment, and the interconnection between these two networks. It contributes to the standardization of telecommunication and datacom equipment installation.
It also co-ordinates with the pre-conditions of the installation to achieve the following targets:
- safety from electrical hazards;
- reliable signal reference;
- satisfactory Electromagnetic Compatibility (EMC) performance.
A defined bonding configuration down to the equipment level shall facilitate the installation, operation and maintenance of telecommunication centres in telecommunication buildings or similar installations independent of the equipment supplier. The specification of telecommunication and datacom equipment and of the pre-conditions of installation are subject to agreement of the parties (e.g. the supplier and the purchaser). Annex A can be used in the procedure to achieve agreement.
The present document does not cover safety and EMC aspects of the equipment. Those aspects are covered by other relevant standards. The present document does not apply to the installation of telecommunication and datacom equipment in locations other than telecommunication centres, e.g.:
- smaller telecommunication equipment inside a subscriber's building;
- subscriber line terminal equipment.
NOTE: Earthing and bonding of equipment installed in locations other than telecommunication building is covered by EN 50310 [8].

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 019-2-1 V2.1.2:2006(Main)
Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-1: Specification of environmental tests; Storage
ETSI EN 300 019-2-1 V2.1.2 (2000-09)

The present document specifies test severities and methods for verification of the required resistibility of equipment according to the relevant environmental class. The tests defined in Part 2-1 of this multi-part standard apply to storage of equipment covering the environmental conditions stated in ETS 300 019-1-1 [1].

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 019-2-3 V2.2.1:2006(Main)
Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-3: Specification of environmental tests; Stationary use at weatherprotected locations
ETSI EN 300 019-2-3 V2.2.1 (2003-03)

The present document specifies test severities and methods for the verification of the required resistibility of equipment according to the relevant environmental class. The tests in Part 2-3 of this multi-part EN apply to stationary use of equipment at weatherprotected locations covering the environmental conditions stated in EN 300 019-1-3 [1].

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 132-3 V1.2.1:2006(Main)
Environmental Engineering (EE); Power supply interface at the input to telecommunications equipment; Part 3: Operated by rectified current source, alternating current source or direct current source up to 400 V
ETSI EN 300 132-3 V1.2.1 (2003-08)

The present document contains requirements for:
• the output performance of the power equipment at the interface A3;
• the input of the telecommunications equipment connected to interface A3.
The voltage at interface A3 may be the ac mains, a rectified voltage derived from ac three phase mains, a rectified voltage derived from ac single phase mains or a low voltage derived from a battery. The power supply equipment may incorporate a backup battery.
The present document aims at providing compatibility between the power supply equipment and both the telecommunications equipment, and the different load units connected to the same interface A3 (e.g. datacom equipment).
The requirements at interface A3 apply to:
• the output of the power supply equipment or power supply installation of telecommunications centres;
• the power supply input of telecommunications equipment and the datacom equipment installed at telecommunications centres;
• telecommunications equipment and the datacom equipment, installed in customer's premises, whose power interface A3 is also used by equipment requiring a supply to the present document. The purpose of the present document is:
• to identify a power supply system with the same characteristics for all telecommunications and data communication equipment defined in the area of application;
• to facilitate interworking of different (types of) loads units;
• to facilitate the standardization of power supply systems for telecommunications and datacom equipment;
• to facilitate the installation, operation and maintenance in the same network of equipment and telecommunications and datacom systems from different origins.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 019-1-6 V2.1.2:2006(Main)
Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 1-6: Classification of environmental conditions; Ship environments
ETSI EN 300 019-1-6 V2.1.2 (2002-04)

The present document defines classes of environmental conditions and their severities to which telecommunication equipment may be exposed. The severities specified are those which will have a low probability of being exceeded; generally less than 1 %. The present document applies to equipment designed principally for maritime use. Conditions of use vary significantly in relation to the size of the vessel and the function for which it was designed. The reader should ensure that the relevant classes are chosen to suit this particular application. The present document covers the following types of vessel:
- vessel propelled by mechanical means, including offshore units;
- vessel not propelled by mechanical means, including sailing boats and life rafts.
The classes defined apply to all sizes of vessel from pleasure craft to trawlers, ferry boats, icebreakers and cargo ships including tankers.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 019-1-8 V2.1.2:2006(Main)
Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 1-8: Classification of environmental conditions; Stationary use at underground locations
ETSI EN 300 019-1-8 V2.1.2 (2002-04)

The present document defines the classes of environmental conditions and their severities to which telecommunications equipment may be exposed. The severities specified are those which will have a low probability of being exceeded; generally less than 1 %. The present document applies to equipment installed for stationary use at underground locations during:
- normal operation;
- on site installation and lining up;
- repair, maintenance and restoration of functions failed.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day