iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60794-2-10:2004

(Main)

Optical fibre cables -- Part 2-10: Indoor cables - Family specification for simplex and duplex cables

Optical fibre cables -- Part 2-10: Indoor cables - Family specification for simplex and duplex cables

Deals with simplex and duplex optical fibre cables for indoor use. The requirements of the sectional specification EN 60794-2 are applicable to cables covered by this standard.

Lichtwellenleiterkabel -- Teil 2-10: LWL-Innenkabel - Familienspezifikation für Simplex- und Duplexkabel

Câbles à fibres optiques -- Partie 2-10: Câbles intérieurs - Spécification de famille pour les câbles simplex et duplex

Traite des câbles à fibres optiques simplex et duplex pour usage intérieur. Les prescriptions de la spécification intermédiaire EN 60794-2 sont applicables aux câbles couverts par la présente norme

Optični kabli – 2-10. del: Notranji kabli – Rodovna specifikacija za kable simpleks in dupleks (IEC 60794-2-10:2003)

General Information

Status
Withdrawn
Publication Date
30-Sep-2004
Withdrawal Date
13-Aug-2014
ICS
33.180.10 - Fibres and cables
Technical Committee
iTEL - Communication cables
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
13-Aug-2014
Due Date
05-Sep-2014
Completion Date
14-Aug-2014
Ref Project
EN 60794-2-10:2003 - Optical fibre cables - Part 2-10: Indoor cables - Family specification for simplex and duplex cables

Relations

Revised
SIST EN 60794-2-10:2011 - Optical fibre cables - Part 2-10: Indoor optical fibre cables - Family specification for simplex and duplex cables (IEC 60794-2-10:2011)
Effective Date
06-May-2014
Replaced By
SIST EN 60794-2-10:2011 - Optical fibre cables - Part 2-10: Indoor optical fibre cables - Family specification for simplex and duplex cables (IEC 60794-2-10:2011)
Effective Date
29-Jan-2023
Replaced By
SIST EN 60794-2-10:2011 - Optical fibre cables - Part 2-10: Indoor optical fibre cables - Family specification for simplex and duplex cables (IEC 60794-2-10:2011)
Effective Date
01-Dec-2011

Buy Standard

EN 60794-2-10:2004EN 60794-2-10:2004
PreviousNext
Standard
EN 60794-2-10:2004
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 61314-1-1:2012(Main)
Fibre optic interconnecting devices and passive components - Fibre optic fan-outs - Part 1-1: Blank detail specification (IEC 61314-1-1:2011)
EN 61314-1-1:2012

This blank detail specification is not, by itself, a specification. It is part of the generic specification IEC 61314-1, Fibre optic interconnecting devices and passive components - Fibre optic fanouts - Part 1: Generic specification. It includes: - a blank worksheet with instructions for preparing detail specifications.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60794-2-10:2011(Main)
Optical fibre cables - Part 2-10: Indoor optical fibre cables - Family specification for simplex and duplex cables (IEC 60794-2-10:2011)
EN 60794-2-10:2011

IEC 60794-2-10:2011 covers simplex and duplex optical fibre cables for indoor use except for cables used in terminated assemblies specified by IEC 60794-2-50. The requirements of the Sectional specification IEC 60794-2 are applicable to cables covered by this standard. The main changes with respect to the previous edition are as follows:  - A new clause has been introduced: Clause 4 - Dimensions;  - Test conditions and requirements have been made more accurate;  - The new Subclause 5.5 has been added to give useful figures.   This publication is to be read in conjunction with IEC 60794-1-1:2001, IEC 60794-1-2:2003 and IEC 60794-2:2002.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60794-3-30:2009(Main)
Optical fibre cables - Part 3-30: Outdoor cables - Family specification for optical telecommunication cables for lakes, river crossings and coastal application (IEC 60794-3-30:2008)
EN 60794-3-30:2008

This part of IEC 60794 is a family specification which covers optical fibre ribbon cables for indoor use. The requirements of the sectional specification IEC 60794-2 are applicable to cables covered by this standard. Clause B.2 contains requirements that supersede the normal requirements in case the cables are intended to be used in installations governed by the MICE table of ISO/IEC 24702.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60794-2-41:2008(Main)
Optical fibre cables - Part 2-41: Indoor cables - Product specification for simplex and duplex buffered A4 fibres (IEC 60794-2-41:2008)
EN 60794-2-41:2008

This part of IEC 60794 covers simplex and duplex buffered A4a through A4g fibres for indoor use. These may be cut into short lengths, which can be used in patchcord cable assemblies. The requirements of sectional specification IEC 60794-2 are applicable to cables covered by this standard.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60794-2-42:2008(Main)
Optical fibre cables -- Part 2-42: Indoor optical fibre cables - Product specification for simplex and duplex cables with A4 fibres
EN 60794-2-42:2008

This part of IEC 60794 covers simplex and duplex optical fibre cables containing A4 fibres for indoor use. The requirements of the sectional specification IEC 60794-2 are applicable to cables covered by this standard.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60794-2-40:2008(Main)
Optical fibre cables -- Part 2-40: Indoor optical fibre cables - Family specification for A4 fibre cables
EN 60794-2-40:2008

This part of IEC 60794 is a family specification covering buffered A4 fibres and cabled A4 fibres for indoor use. See IEC 60794-2-41 and IEC 60794-2-42 for blank detail specifications.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CLC/TS 50429:2006(Main)
Optical fibre cables - Sewer cables - Family specification for cables to be installed in storm and sanitary sewers
CLC/TS 50429:2005

This document is a family specification that covers sewer  cables and conduits for installation by blowing and/ or pulling in  non-man accessible storm and sanitary sewers, also applicable  for man-accessible and lateral ones. Systems built with  components covered by this standard are subject to the  requirements of sectional specifications EN 60794-3 and EN  60794-4 where applicable. Sewer cable and conduit  constructions have to meet the different requirements of the  sewer operating companies and / or associations regarding  chemical, environmental, operational, cleaning and in general  maintenance conditions. A table of preferential applications,  describing sewer cable characteristics versus methods of  installation is reported in Annex A for non-man accessible  sewers. Clause 4 describes a blank detail specification for  sewer cables and conduits for installation by blowing and/ or  pulling in storm and sanitary sewers. It incorporates some  minimum requirements. Detail specifications may be prepared  on the basis of this family specification. The parameters  specified in this standard may be affected by measurement  uncertainty arising either from measurement errors or  calibration errors due to lack of suitable standards. Acceptance  criteria should be interpreted with respect to this consideration.  The number of fibres tested is representative of the sewer cable  and should be agreed between the customer and supplier.

  • Technical specification
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CLC/TS 50431:2006(Main)
Optical fibre cables - Drinking water pipe cables - Family specification for cables to be installed in drinking water pipes
CLC/TS 50431:2005

This document is a family specification that covers drinking  water pipe cables and sub-ducts for installation by blowing  and/or pulling / dragging in drinking water pipes. Systems built  with components covered by this standard are subject to the  requirements of sectional specifications EN 60794-3 and EN  60794-4 where applicable. Drinking water pipe cable and sub- duct constructions have to meet the different requirements of  the drinking water companies and/or associations regarding  chemical, environmental, operational interactions and in general  maintenance conditions. A table of preferential applications,  describing drinking water pipe cable characteristics versus  methods of installation is reported in Annex A for drinking water  pipe cables. Clause 4 describes a blank detail specification for  drinking water pipe cables and sub-ducts for installation by  blowing and/or pulling / dragging in / flowing drinking water  pipes. It incorporates some minimum requirements. Detail  specifications may be prepared on the basis of this family  specification. The parameters specified in this standard may be  affected by measurement uncertainty arising either from  measurement errors or calibration errors due to lack of suitable  standards. Acceptance criteria should be interpreted with  respect to this consideration. The number of fibres tested is  representative of the sewer cable and should be agreed  between the customer and supplier.

  • Technical specification
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CLC/TS 50430:2006(Main)
Optical fibre cables - Gas pipe cables - Family specification for cables to be installed in high pressure gas pipes
CLC/TS 50430:2005

This document is a family specification that covers gas pipe  cables and sub-ducts for installation by blowing and/or pulling /  dragging in high pressure gas pipes. Systems built with  components covered by this standard are subject to the  requirements of sectional specifications EN 60794-3 and EN  60794-4 where applicable. Gas pipe cable and sub-duct  constructions have to meet the different requirements of the  gas- companies and/or associations regarding chemical,  environmental, operational interactions and in general  maintenance conditions. A table of preferential applications,  describing gas pipe cable characteristics versus methods of  installation is reported in Annex A for high pressure gas pipe  cables. Clause 4 describes a blank detail specification for gas  pipe cables and sub-ducts for installation by blowing and/or  pulling / dragging in/into high pressure gas pipes. It  incorporates some minimum requirements. Detail specifications  may be prepared on the basis of this family specification. The  parameters specified in this standard may be affected by  measurement uncertainty arising either from measurement  errors or calibration errors due to lack of suitable standards.  Acceptance criteria should be interpreted with respect to this  consideration. The number of fibres tested is representative of  the sewer cable and should be agreed between the customer  and supplier.

  • Technical specification
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60794-1-1:2023(Main)
Optical fibre cables - Part 1-1: Generic specification - General (IEC 60794-1-1:2023)
EN IEC 60794-1-1:2023

IEC 60794-1-1:2023 applies to optical fibre cables for use with communication equipment and devices employing similar techniques. Electrical properties are specified for optical ground wire (OPGW) and optical phase conductor (OPPC) cables. Hybrid communication cables are specified in the IEC 62807 series. The object of this document is to establish uniform generic requirements for the geometrical, transmission, material, mechanical, ageing (environmental exposure), climatic and electrical properties of optical fibre cables and cable elements, where appropriate. This fifth edition cancels and replaces the fourth edition published in 2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) reorganization of the document to a more logical flow making it easier for the reader:
b) expansion of the tables to include names and definitions of all documents in the IEC 60794‑x series;
c) expansion of the definitions, graphical symbols, terminology and abbreviations content, with the aim of making this document the default and reference for all others in the IEC 60794‑x series;
d) inclusion of updated, reorganized and expanded optical fibre, attenuation and bandwidth subclauses, with the aim of making this document the default and reference for all others in the IEC 60794-x series.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day