oSIST prEN 2997-006:2022
(Main)Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 006: Hermetic jam-nut mounted receptacle - Product standard
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 006: Hermetic jam-nut mounted receptacle - Product standard
This document specifies the characteristics of hermetic jam-nut mounted receptacles in the family of circular electrical connectors coupled by threaded ring.
It applies to the class defined in Table 4.
For plugs and protective covers, see EN 2997-008 and EN 2997-009 respectively. For spare jam-nuts and O-rings, see EN 2997-012 and EN 2997-013 respectively.
Luft- und Raumfahrt - Elektrische Rundsteckverbinder mit Schraubkupplung, feuerbeständig oder nicht feuerbeständig, Betriebstemperaturen - 65 °C bis 175 °C konstant, 200 °C konstant, 260 °C Spitze - Teil 006: Hermetischer fester Steckverbinder mit Mutternbefestigung - Produktnorm
Série aérospatiale - Connecteurs électriques circulaires à accouplement par bague filetée, résistant au feu ou non, températures d'utilisation -65 °C à 175 °C continu, 200 °C continu, 260 °C en pointe - Partie 006 : Embase hermétique à fixation par écrou - Norme de produit
Le présent document spécifie les caractéristiques des embases hermétiques à fixation par écrou de la famille des connecteurs électriques circulaires à accouplement par bague filetée.
Il s'applique aux classes définies dans le Tableau 4.
Pour les fiches et les bouchons de vol, voir respectivement l’EN 2997-008 et l’EN 2997-009. Pour les écrous de fixation et joints toriques de rechange, voir respectivement l’EN 2997-012 et l’EN 2997-013.
Aeronavtika - Konektorji, električni, okrogli, priključeni z navojnim obročkom, odporni ali neodporni proti ognju, s stalno delovno temperaturo med –65 °C in 175 °C, stalno 200 °C, najvišjo 260 °C - 006. del: Neprepustna pritrditev z matico - Standard za proizvod
General Information
RELATIONS
Standards Content (sample)
SLOVENSKI STANDARD
oSIST prEN 2997-006:2022
01-junij-2022
Aeronavtika - Konektorji, električni, okrogli, priključeni z navojnim obročkom,
odporni ali neodporni proti ognju, s stalno delovno temperaturo med –65 °C in 175
°C, stalno 200 °C, najvišjo 260 °C - 006. del: Neprepustna pritrditev z matico -Standard za proizvod
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-
resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200
°C continuous, 260 °C peak - Part 006: Hermetic jam-nut mounted receptacle - Product
standardLuft- und Raumfahrt - Elektrische Rundsteckverbinder mit Schraubkupplung,
feuerbeständig oder nicht feuerbeständig, Betriebstemperaturen - 65 °C bis 175 °C
konstant, 200 °C konstant, 260 °C Spitze - Teil 006: Hermetischer fester Steckverbinder
mit Mutternbefestigung - ProduktnormSérie aérospatiale - Connecteurs électriques circulaires à accouplement par bague
filetée, résistant au feu ou non, températures d'utilisation -65 °C à 175 °C continu, 200
°C continu, 260 °C en pointe - Partie 006 : Embase hermétique à fixation par écrou -
Norme de produitTa slovenski standard je istoveten z: prEN 2997-006
ICS:
31.220.10 Vtiči in vtičnice, konektorji Plug-and-socket devices.
Connectors
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
oSIST prEN 2997-006:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------oSIST prEN 2997-006:2022
---------------------- Page: 2 ----------------------
oSIST prEN 2997-006:2022
DRAFT
EUROPEAN STANDARD
prEN 2997-006
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2022
ICS 49.060 Will supersede EN 2997-006:2017
English Version
Aerospace series - Connectors, electrical, circular, coupled
by threaded ring, fire-resistant or non fire-resistant,
operating temperatures - 65 °C to 175 °C continuous, 200
°C continuous, 260 °C peak - Part 006: Hermetic jam-nut
mounted receptacle - Product standard
Série aérospatiale - Connecteurs électriques circulaires Luft- und Raumfahrt - Elektrische Rundsteckverbinder
à accouplement par bague filetée, résistant au feu ou mit Schraubkupplung, feuerbeständig oder nicht
non, températures d'utilisation - 65 °C à 175 °C feuerbeständig, Betriebstemperaturen - 65 °C bis 175
continu, 200 °C continu, 260 °C en pointe - Partie 006 : °C konstant, 200 °C konstant, 260 °C Spitze - Teil 006:
Embase hermétique à fixation par écrou - Norme de Hermetischer fester Steckverbinder mit
produit Mutternbefestigung - ProduktnormThis draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 2997-006:2022 E
worldwide for CEN national Members.---------------------- Page: 3 ----------------------
oSIST prEN 2997-006:2022
prEN 2997-006:2022 (E)
Contents Page
European foreword ............................................................................................................................................ 3
1 Scope .......................................................................................................................................................... 4
2 Normative references .......................................................................................................................... 4
3 Terms and definitions ......................................................................................................................... 4
4 Required characteristics .................................................................................................................... 4
5 Designation ............................................................................................................................................. 9
6 Marking .................................................................................................................................................... 9
7 Technical specification ....................................................................................................................... 9
Annex A (informative) Evolution sheet ................................................................................................... 10
Bibliography ....................................................................................................................................................... 11
---------------------- Page: 4 ----------------------oSIST prEN 2997-006:2022
prEN 2997-006:2022 (E)
European foreword
This document (prEN 2997-006:2022) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.This document is currently submitted to the CEN Enquiry.
This document will supersede EN 2997-006:2017.
---------------------- Page: 5 ----------------------
oSIST prEN 2997-006:2022
prEN 2997-006:2022 (E)
1 Scope
This document specifies the characteristics of hermetic jam-nut mounted receptacles in the family of
circular electrical connectors coupled by threaded ring.It applies to the class defined in Table 4.
For plugs and protective covers, see EN 2997-008 and EN 2997-009 respectively. For spare jam-nuts and
O-rings, see EN 2997-012 and EN 2997-01...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.