Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 004: Cable outlet, style A, straight, unsealed with clamp strain relief - Product standard

This document defines a range of cable outlets, style A, straight, unsealed with clamp strain relief for use under the following conditions:
Associated electrical connector(s)   :   EN 3660-002
Temperature range,   Class N   :   - 65 °C to 200 °C
Class W   :   - 65 °C to 175 °C
Class K   :   - 65 °C to 260 °C
Class A   :   - 65 °C to 200 °C
Class T   :   - 65 °C to 175 °C (Nickel PTFE plating)
Class Z   :   - 65 °C to 175 °C (Black zinc nickel plating)

Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 004: Endgehäuse, Bauform A, gerade Ausführung, nicht abgedichtet, mit Zugentlastungsklemme - Produktnorm

Diese Europäische Norm legt eine Reihe von Endgehäusen, Bauform A, gerade Ausführung, nicht abgedichtet,
mit Zugentlastungsklemme für die Verwendung unter den folgenden Bedingungen fest:
Zugehörige(r) elektrische(r) Steckverbinder : EN 3660-002
Temperaturbereich, Klasse N : −65 °C bis 200 °C
Klasse W : −65 °C bis 175 °C
Klasse K : −65 °C bis 260 °C
Klasse A : −65 °C bis 200 °C
Klasse T : −65 °C bis 175 °C
Klasse Z : −65 °C bis 175 °C

Série aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques - Partie 004 : Raccord droit non étanche type A avec brides serre-câbles - Norme de produit

La présente Norme européenne de produit définit une gamme de raccords droits non étanches, type A, avec brides serre-câbles, destinés à être utilisés dans les conditions ci-après :
Connecteur(s) électrique(s) associé(s) : EN 3660-002
Plage de températures, Classe N : - 65 °C à 200 °C
Classe W : - 65 °C à 175 °C
Classe K : - 65 °C à 260 °C
Classe A : - 65 °C à 200 °C
Classe T : - 65 °C à 175 °C
Classe Z : - 65 °C à 175 °C

Aeronavtika - Dodatki za okrogle in pravokotne električne in optične konektorje - 004. del: Kabelska spojka, tip A, ravna, netesnjena, z razbremenilno sponko - Standard za proizvod (vključno s popravkom AC)

Ta dokument opredeljuje različne kabelske spojke, tipa A, ravne, netesnjene, z razbremenilno sponko za uporabo pod naslednjimi pogoji:
Povezani električni konektorji:   :   EN 3660-002
Temperaturno območje,   Razred N   :   od −65 °C do 200 °C
Razred W   :   od −65 °C do 175 °C
Razred K   :   od −65 °C do 260 °C
Razred A   :   od −65 °C do 200 °C
Razred T   :   od −65 °C do 175 °C (nikljeva prevleka PTFE)
Razred Z   :   od −65 °C do 175 °C (črna cink-nikljeva prevleka)

General Information

Status
Published
Publication Date
13-May-2019
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
07-May-2019
Due Date
12-Jul-2019
Completion Date
14-May-2019

RELATIONS

Buy Standard

Standard
SIST EN 3660-004:2019+AC:2019
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 3660-004:2019+AC:2019
01-julij-2019
Nadomešča:
SIST EN 3660-004:2019

Aeronavtika - Dodatki za okrogle in pravokotne električne in optične konektorje -

004. del: Kabelska spojka, tip A, ravna, netesnjena, z razbremenilno sponko -
Standard za proizvod (vključno s popravkom AC)

Aerospace series - Cable outlet accessories for circular and rectangular electrical and

optical connectors - Part 004: Cable outlet, style A, straight, unsealed with clamp strain

relief - Product standard
Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und

Rechtecksteckverbinder - Teil 004: Endgehäuse, Bauform A, gerade Ausführung, nicht

abgedichtet, mit Zugentlastungsklemme - Produktnorm

Série aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires

électriques et optiques - Partie 004 : Raccord droit non étanche type A avec brides

serre-câbles - Norme de produit
Ta slovenski standard je istoveten z: EN 3660-004:2018+AC:2019
ICS:
31.220.10 Vtiči in vtičnice, konektorji Plug-and-socket devices.
Connectors
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
SIST EN 3660-004:2019+AC:2019 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 3660-004:2019+AC:2019
---------------------- Page: 2 ----------------------
SIST EN 3660-004:2019+AC:2019
EN 3660-004:2018+AC
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2019
EUROPÄISCHE NORM
ICS 49.060 Supersedes EN 3660-004:2018
English Version
Aerospace series - Cable outlet accessories for circular and
rectangular electrical and optical connectors - Part 004:
Cable outlet, style A, straight, unsealed with clamp strain
relief - Product standard

Série aérospatiale - Accessoires arrière pour Luft- und Raumfahrt - Endgehäuse für elektrische und

connecteurs circulaires et rectangulaires électriques et optische Rund- und Rechtecksteckverbinder - Teil 004:

optiques - Partie 004 : Raccord droit non étanche type Endgehäuse, Bauform A, gerade Ausführung, nicht

A avec brides serre-câbles - Norme de produit abgedichtet, mit Zugentlastungsklemme -

Produktnorm

This European Standard was approved by CEN on 11 June 2018 and includes Corrigendum 1 issued by CEN on 24 April 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N
EUROPÄISCHES KOMITEE FÜR NORMUN G
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3660-004:2018+AC:2019 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 3660-004:2019+AC:2019
EN 3660-004:2018+AC:2019 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

1 Scope .................................................................................................................................................................... 4

2 Normative references .................................................................................................................................... 4

3 Terms and definitions ................................................................................................................................... 4

4 Characteristics ................................................................................................................................................. 5

5 Designation..................................................................................................................................................... 12

6 Marking ............................................................................................................................................................ 12

7 Technical specification ............................................................................................................................... 12

---------------------- Page: 4 ----------------------
SIST EN 3660-004:2019+AC:2019
EN 3660-004:2018+AC:2019 (E)
European foreword

This document (EN 3660-004:2018+AC:2019) has been prepared by the Aerospace and Defence

Industries Association of Europe - Standardization (ASD-STAN).

After enquiries and votes carried out in accordance with the rules of this Association, this Standard has

received the approval of the National Associations and the Official Services of the member countries of

ASD, prior to its presentation to CEN.

This European Standard shall be given the status of a national standard, either by publication of an

identical text or by endorsement, at the latest by October 2019, and conflicting national standards shall

be withdrawn at the latest by October 2019.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

This document includes Corrigendum 1 issued by CEN on 24 April 2019.
This document supersedes ˜EN 3660-004:2018™.

The start and finish of text introduced or altered by corrigendum is indicated in the text by tags ˜™.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,

Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,

Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,

Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.
---------------------- Page: 5 ----------------------
SIST EN 3660-004:2019+AC:2019
EN 3660-004:2018+AC:2019 (E)
1 Scope

This European Standard defines a range of cable outlets, style A, straight, unsealed with clamp strain

relief for use under the following conditions:
Associated electrical connector(s) : EN 3660-002
Temperature range, Class N : − 65 °C to 200 °C
Class W : − 65 °C to 175 °C
Class K : − 65 °C to 260 °C
Class A : − 65 °C to 200 °C
˜Class T : − 65 °C to 175 °C
Class Z : − 65 °C to 175 °C™
2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments) applies.

EN 2591- , Aerospace series — Elements of electrical and optical connection — Test methods

EN 2997 (all parts), Aerospace series ― Connectors, electrical, circular, coupled by threaded ring,

fire-resistant or non fire-resistant, operating temperatures − 65 °C to 175 °C continuous, 200 °C continuous,

260 °C peak

EN 3660-001, Aerospace series — Cable outlet accessories for circular and rectangular electrical and

optical connectors — Part 001: Technical specification

EN 3660-002, Aerospace series — Cable outlet accessories for circular and rectangular electrical and

optical connectors — Part 002: Index of product standards
3 Terms and definitions

For the purposes of this document, the terms and definitions given in EN 3660-001 apply.

ISO and IEC maintain terminological databases for use in standardization at the following addresses:

• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing plat
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.