Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 013: Dummy receptacle - Product standard

This European Standard specifies the characteristics of dummy receptacles in the family of circular,
electrical connectors, with triple start threaded coupling.
It applies to models in Table 3.
For plugs and protective covers, see EN 3645-006, EN 3645-008, EN 3645-011 and EN 3645-012
respectively.
These receptacles are derived from those in specification MIL-DTL-38999/22.

Luft- und Raumfahrt - Raumfahrt - Elektrische Rundsteckverbinder, kontaktgeschützt, drei-gängige Gewinde Schnellkupplung, Dauerbetriebstemperaturen 175 °C oder 200 °C - Teil 013: Blinddose - Produktnorm

Diese Europäische Norm legt die Eigenschaften von Blinddosen in der Familie der elektrischen Rundsteck-verbinder mit dreigängiger Gewinde-Schnellkupplung fest.
Sie gilt für die in Tabelle 3 angegebenen Bauformen.
Hinsichtlich der freien Steckverbinder und Schutzkappen siehe EN 3645-006, EN 3645-008, EN 3645-011 und EN 3645-012.
Diese Blinddosen wurden von den Blinddosen in der Spezifikation MIL-DTL-38999/22 abgeleitet.

Série aérospatiale - Connecteurs électriques circulaires à contacts protégés, à accouplement par filetage à pas rapide à trois filets, températures d'utilisation 175 °C ou 200 °C continu - Partie 013 : Embase de repos - Norme de produit

La présente Norme européenne spécifie les caractéristiques des embases de repos de la famille des connecteurs électriques circulaires à accouplement par filetage à pas rapides à trois filets.
Elle s’applique aux modèles du Tableau 3.
Pour les fiches et les bouchons de vol, voir respectivement les EN 3645-006, EN 3645-008, EN 3645-011 et EN 3645-012.
Ces embases sont dérivées de celles de la spécification MIL-DTL-38999/22.

Aeronavtika - Konektorji, električni, okrogli, zaščiten kontakt, hitra spojka z navojem, stalna delovna temperatura 175 °C ali 200 °C - 013. del: Slepa doza - Standard za proizvod

Ta evropski standard določa značilnosti slepe doze iz družine okroglih
električnih konektorjev s hitro spojko z navojem.
Uporablja se za modele iz preglednice 3.
Za čepe in zaščitna prekrivala glej ustrezne standarde EN 3645-006, EN 3645-008, EN 3645-011 in
EN 3645-012.
Te doze izhajajo iz tistih v specifikaciji MIL-DTL-38999/22.

General Information

Status
Published
Publication Date
01-Jul-2019
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
20-Jun-2019
Due Date
25-Aug-2019
Completion Date
02-Jul-2019

RELATIONS

Buy Standard

Standard
SIST EN 3645-013:2019
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 3645-013:2019
01-september-2019
Nadomešča:
SIST EN 3645-013:2009
Aeronavtika - Konektorji, električni, okrogli, zaščiten kontakt, hitra spojka z
navojem, stalna delovna temperatura 175 °C ali 200 °C - 013. del: Slepa doza -
Standard za proizvod

Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded

coupling, operating temperature 175 °C or 200 °C continuous - Part 013: Dummy
receptacle - Product standard

Luft- und Raumfahrt - Raumfahrt - Elektrische Rundsteckverbinder, kontaktgeschützt,

drei-gängige Gewinde Schnellkupplung, Dauerbetriebstemperaturen 175 °C oder 200 °C

- Teil 013: Blinddose - Produktnorm
Série aérospatiale - Connecteurs électriques circulaires à contacts protégés, à

accouplement par filetage à pas rapide à trois filets, températures d'utilisation 175 °C ou

200 °C continu - Partie 013 : Embase de repos - Norme de produit
Ta slovenski standard je istoveten z: EN 3645-013:2019
ICS:
31.220.10 Vtiči in vtičnice, konektorji Plug-and-socket devices.
Connectors
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
SIST EN 3645-013:2019 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 3645-013:2019
---------------------- Page: 2 ----------------------
SIST EN 3645-013:2019
EN 3645-013
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2019
EUROPÄISCHE NORM
ICS 49.060 Supersedes EN 3645-013:2007
English Version
Aerospace series - Connectors, electrical, circular, scoop-
proof, triple start threaded coupling, operating
temperature 175 °C or 200 °C continuous - Part 013:
Dummy receptacle - Product standard

Série aérospatiale - Connecteurs électriques circulaires Luft- und Raumfahrt - Raumfahrt - Elektrische

à contacts protégés, à accouplement par filetage à pas Rundsteckverbinder, kontaktgeschützt, drei-gängige

rapide à trois filets, températures d'utilisation 175 °C Gewinde Schnellkupplung, Dauerbetriebstemperaturen

ou 200 °C continu - Partie 013 : Embase de repos - 175 °C oder 200 °C - Teil 013: Blinddose -

Norme de produit Produktnorm
This European Standard was approved by CEN on 2 December 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3645-013:2019 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 3645-013:2019
EN 3645-013:2019 (E)
Contents Page

European foreword ...................................................................................................................................................... 3

1 Scope .................................................................................................................................................................... 4

2 Normative references .................................................................................................................................... 4

3 Terms and definitions ................................................................................................................................... 5

4 Required characteristics .............................................................................................................................. 5

5 Designation ....................................................................................................................................................... 8

6 Marking ............................................................................................................................................................... 9

7 Technical specification ................................................................................................................................. 9

---------------------- Page: 4 ----------------------
SIST EN 3645-013:2019
EN 3645-013:2019 (E)
European foreword

This document (EN 3645-013:2019) has been prepared by the Aerospace and Defence Industries

Association of Europe - Standardization (ASD-STAN).

After enquiries and votes carried out in accordance with the rules of this Association, this Standard has

received the approval of the National Associations and the Official Services of the member countries of

ASD, prior to its presentation to CEN.

This European Standard shall be given the status of a national standard, either by publication of an

identical text or by endorsement, at the latest by December 2019, and conflicting national standards shall

be withdrawn at the latest by December 2019.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

This document supersedes EN 3645-013:2007.
According to the CEN/CENELEC Internal Regulations, the nat
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.