SIST EN ISO 10066:1999

Flexible cellular polymeric materials - Determination of creep in compression (ISO 10066:1991)

Contains a procedure intended primarily for quality assurance in packaging applications. Describes the principle, the apparatus, the preparation of specimens, conditioning methods, the test procedure, and the contents of the test report.

Weichelastische polymere Schaumstoffe - Bestimmung des Kriechens bei Druckbeanspruchung (ISO 10066:1991)

Die vorliegende Internationale Norm beschreibt das Verfahren zur Bestimmung des Kriechens weich-elastischer polymerer Schaumstoffe beim Zusammendrücken mit konstanter Kraft und dient hauptsächlich der Qualitätssicherung beim Einsatz für Verpackungszwecke. Anmerkung 1: Die Prüfung darf auch zur Gewinnung von Konstruktionsdaten herangezogen werden.

Matériaux polymeres alvéolaires souples - Détermination du fluage en compression (ISO 1006:1991)

La présente Norme internationale décrit le mode opératoire pour déterminer le fluage d'un matériau polymère alvéolaire souple lorsqu'il est comprimé par une force statique, destiné principalement à l'assurance de la qualité des emballages.  
NOTE 1 L'essai peut aussi servir pour l'obtention de données de conception. Par exemple, un matériau montrant un fluage excessif ne devrait pas être choisi pour la fabrication de coussins destinés à supporter des objets emballés, à cause de la possibilité de glissement au cours du stockage. La quantité de fluage et la contrainte statique de sécurité admissibles dépendent de l'épaisseur du coussin, de la durée de vie de l'emballage et des conditions de stockage.

Penjeni polimerni materiali – Mehke pene – Določevanje deformacije pri stiskanju (ISO 10066:1991)

General Information

• Status: Published
• Publication Date: 30-Apr-1999
• ICS: 83.100 - Cellular materials
• Technical Committee: IPMA - Polimer materials and products
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-May-1999
• Due Date: 01-May-1999
• Completion Date: 01-May-1999
• Ref Project: EN ISO 10066:1997 - Flexible cellular polymeric materials - Determination of creep in compression (ISO 10066:1991)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10066:1999
01-maj-1999
3HQMHQLSROLPHUQLPDWHULDOL±0HKNHSHQH±'RORþHYDQMHGHIRUPDFLMHSULVWLVNDQMX
,62
Flexible cellular polymeric materials - Determination of creep in compression (ISO
10066:1991)
Weichelastische polymere Schaumstoffe - Bestimmung des Kriechens bei
Druckbeanspruchung (ISO 10066:1991)
Matériaux polymeres alvéolaires souples - Détermination du fluage en compression (ISO
1006:1991)
Ta slovenski standard je istoveten z: EN ISO 10066:1997
ICS:
83.100 Penjeni polimeri Cellular materials
SIST EN ISO 10066:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10066:1999

---------------------- Page: 2 ----------------------

SIST EN ISO 10066:1999

---------------------- Page: 3 ----------------------

SIST EN ISO 10066:1999

---------------------- Page: 4 ----------------------

SIST EN ISO 10066:1999

---------------------- Page: 5 ----------------------

SIST EN ISO 10066:1999

---------------------- Page: 6 ----------------------

SIST EN ISO 10066:1999
INTERNATIONAL
STANDARD
First edition
1991-l 1-15
Flexible cellular polymeric materials -
Determination of creep in compression
Mat&-iaux polymkes alv6olaires souples - D6termination du fluage en
compression
Reference number
IS0 10066:1991(E)

---------------------- Page: 7 ----------------------

SIST EN ISO 10066:1999
IS0 10066:1991(E)
Foreword
IS0 (the International Organization for Standardization) is a worldwide
federation of national standards bodies (IS0 member bodies). The work
of preparing International Standards is normally carried out through IS0
technical committees. Each member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the
work. IS0 collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an lnter-
national Standard requires approval by at least 75 % of the member
bodies casting a vote.
International Standard IS0 10066 was prepared by Technical Committee
ISO/TC 45, Rubber and rubber products.
0 IS0 1991
All rights reserved, No part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without
permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-1211 Geneve 20 l Switzerland
Printed in Switzerland
ii

---------------------- Page: 8 ----------------------

SIST EN ISO 10066:1999
_-- -~
IS0 10066:1991 (E)
INTERNATIONAL STANDARD
Flexible cellular polymeric materials - Determination of
creep in compression
3.3 percentage compression after recovery: The
1 Scope
percentage loss in test piece thickness after 72 h
under static stress followed by a 30 min recovery
This International Standard describes the procedure
period.
for determining the creep of a flexible cellular
polymeric material when compressed by a static
force, intended primarily for quality assurance in
4 Principle
packaging applications.
The change in deformation under a static stress with
NOTE 1 The test may also be used to obtain design
time is measured.
data. For example, a material that shows excessive creep
is not likely to be selected for the manufacture of cushions
to support packaged items because of the possibility of
slippage during storage. The amount of creep and safe
5 Apparatus
static stress that can be allowed depends on cushion
thickness, package life and storage conditions.
The apparatus shall consist of two flat, smooth, but
not polished, plates, at least one of which shall be
2 Normative reference
self-aligning, so arranged that they compress the
test piece evenly in the vertical direction. The plates
The following standard contains provisions which,
shall be capable of being loaded so that during the
through reference in this text, constitute provisions
period of test the static stress does not change by
of this International Standard. At the time of publi-
more than + 1 %, and the separation of the plates
cation, the edition indicated was valid. All standards
shall be capable of being measured to within
are subject to revision, and parties to agreements
0,l mm. The compression stress required varies
based on this International Standard are encour-
with the material, but is usually less than 10 kPa.
aged to investigate the possibility of applying the
The apparatus shall be placed on a substantial sup-
most recent edition of the standard indicated below.
port to minimize the effects of vibration.
Members of IEC and IS0 maintain registers of cur-
rently valid International Standards.
6 Test piece
IS0 1923:1981, Cellu
...