Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids

This document specifies the dimensions of a range of screw thread finishes known as “BVP” for the closure of bottles for beverages and other non-carbonated products, including the major sizes in use of standard and long skirt pilfer proof finishes.
NOTE   This finish is not suitable for liquids that are stored horizontally.

Verpackungen aus Glas - Flaschenverschlüsse - Schraubmundstücke für Flaschen für nicht kohlensäurehaltige Flüssigkeiten

Dieses Dokument legt die Maße einer Reihe von Schraubmundstücken, bekannt als „BVP“, für den Verschluss von Flaschen für Getränke und andere nicht kohlensäurehaltige Produkte fest, einschließlich der Hauptgrößen bei der Anwendung der genormten und gesicherten Mundstücke mit hohem Rand.
ANMERKUNG   Für Flüssigkeiten, die waagerecht gelagert werden, ist dieses Mundstück ungeeignet.

Emballages en verre - Bagues pour bouteilles - Bagues à vis pour bouteilles contenant des liquides non carbonatés

Le présent document spécifie les dimensions d’une gamme de bagues à vis couramment désignées comme « BVP » et utilisées pour le capsulage de bouteilles contenant des boissons et d’autres produits non carbonatés, y compris les principales tailles en usage pour les bagues Pilfer Proof à jupe standard et longue.
NOTE   Cette bague ne convient pas aux liquides stockés horizontalement.

Steklena embalaža - Grla za steklenice - Grla z navojem za steklenice za negazirane tekočine

General Information

Status
Not Published
Public Enquiry End Date
02-Feb-2024
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
15-Nov-2023
Due Date
03-Apr-2024

Relations

Buy Standard

Draft
prEN 15543:2024
English language
20 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 15543:2024
01-januar-2024
Steklena embalaža - Grla za steklenice - Grla z navojem za steklenice za
negazirane tekočine
Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-
carbonated liquids
Verpackungen aus Glas - Flaschenverschlüsse - Schraubmundstücke für Flaschen für
nicht kohlensäurehaltige Flüssigkeiten
Emballages en verre - Bagues pour bouteilles - Bagues à vis pour bouteilles contenant
des liquides non carbonatés
Ta slovenski standard je istoveten z: prEN 15543
ICS:
55.100 Steklenice. Lonci. Kozarci Bottles. Pots. Jars
oSIST prEN 15543:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 15543:2024

---------------------- Page: 2 ----------------------
oSIST prEN 15543:2024


DRAFT
EUROPEAN STANDARD
prEN 15543
NORME EUROPÉENNE

EUROPÄISCHE NORM

December 2023
ICS 55.100 Will supersede EN 15543:2008
English Version

Glass packaging - Finishes for bottles - Screw thread
finishes for bottles for non-carbonated liquids
Emballages en verre - Bagues pour bouteilles - Bagues Verpackungen aus Glas - Flaschenverschlüsse -
à vis pour bouteilles contenant des liquides non Schraubmundstücke für Flaschen für nicht
carbonatés kohlensäurehaltige Flüssigkeiten
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 261.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15543:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 15543:2024
prEN 15543:2023(E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Designation . 5
5 Recommendations . 5
6 Categories and types of screw threads finishes and dimensions . 6
6.1 Categories . 6
6.2 Types . 6
7 Thread profile construction .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.