SIST EN ISO 12822:2020

Glass packaging - 26 H 126 crown finish - Dimensions (ISO 12822:2020)

This document specifies the dimensions of the 26 mm-shallow crown finish for glass bottles containing beverages. The shallow crown finish is designed to use a metal crown cap (see Reference [2]).

Verpackungen aus Glas - Kronenmundstück 26 H 126 - Maße (ISO 12822:2020)

Dieses Dokument legt die Maße des 26 mm halbhohen Kronenmundstückes für Getränkeflaschen aus Glas fest. Das halbhohe Kronenmundstück ist für die Verwendung eines Kronenverschlusses aus Metall ausgelegt (siehe Literaturhinweis [2]).

Emballages en verre - Bague couronne 26 H 126 - Dimensions (ISO 12822:2020)

Le présent document spécifie les dimensions des bagues couronnes basses de 26 mm pour les bouteilles en verre destinées au conditionnement des boissons. La bague couronne basse est conçue pour être utilisée avec une capsule couronne métallique (voir la Référence [2]).

Steklena embalaža - Kronsko grlo 26 H 126 - Mere (ISO 12822:2020)

General Information

• Status: Published
• Public Enquiry End Date: 04-Nov-2018
• Publication Date: 04-May-2020
• ICS: 55.100 - Bottles. Pots. Jars
• Technical Committee: EPO - Packaging - sales and grouped
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 20-Apr-2020
• Due Date: 25-Jun-2020
• Completion Date: 05-May-2020
• Ref Project: EN ISO 12822:2020 - Glass packaging - 26 H 126 crown finish - Dimensions (ISO 12822:2020)

Relations

• Replaces: SIST EN 14635:2010 - Glass packaging - 26 H 126 crown finish - Dimensions
• Effective Date: 01-Jun-2020

Overview - EN ISO 12822:2020 (26 H 126 crown finish)

EN ISO 12822:2020 specifies the dimensions of the 26 H 126 shallow crown finish for glass bottles used for beverages. The finish is designed to accept a 26 mm metal crown cap (shallow crown). This international CEN/ISO standard (second edition, 2020) supersedes EN 14635:2010 and defines the finish geometry, tolerances and important sealing details that ensure reliable capping, sealing and compatibility with capping equipment.

Key topics and technical requirements

• Finish type and purpose: 26 mm shallow crown finish (26 H 126) for beverage glass bottles designed for metal crown caps.
• Dimensional drawings: Design and critical dimensions are defined in Figures 1–5 (profile, shoulder, bore, sealing surface, and crimping edge).
• Critical dimensions (examples from document):
  • Nominal crown diameter: 26 mm cap interface.
  • Diameter measured 3 mm down from top: between 18.5 mm (max) and 17 mm (min).
  • Minimum through-bore: 15.5 mm.
  • Recommended crimping edge radius: between 0.5 mm and 0.8 mm, ideally near 0.5 mm.
• Sealing surface: Must be smooth, free of defects, and avoid contact between the crown cap liner compound and the internal mould parting line of the glass finish.
• Tolerances: General tolerances are aligned with ISO 9058 (Glass containers - Standard tolerances for bottles).
• Variations for one-way bottles: For non-returnable bottles the diameter at a specific location may be ≤ 18.5 mm subject to written agreement among bottler, glass manufacturer and crown cap maker.
• Equipment considerations: Construction limits and capping equipment may impose additional dimensional constraints on neck contour.

Practical applications and users

• Who uses this standard:
  • Glass container manufacturers (neck and finish design)
  • Bottlers and beverage producers (specifying bottle/cap compatibility)
  • Crown cap manufacturers (cap design and liner interface)
  • Capping equipment and filler OEMs (machine tooling and crimp settings)
  • Quality assurance and compliance teams (incoming inspection, testing)
• Why it matters:
  • Ensures interchangeability and reliable sealing between bottles and crown caps
  • Reduces leakage, spoilage and production downtime from misfit caps
  • Facilitates supply-chain compatibility across manufacturers and countries

Related standards

• ISO 9058 - Glass containers: standard tolerances for bottles (normative reference).
• EN 17177 - Glass packaging - Crown cap - 26 mm diameter, 6 mm height (related cap specification).
• Supersedes EN 14635:2010.

Keywords: EN ISO 12822:2020, 26 H 126 crown finish, glass packaging, crown cap dimensions, shallow crown finish, glass bottles, capping equipment, sealing surface.

Standards Content (Sample)

SLOVENSKI STANDARD
01-junij-2020
Nadomešča:
SIST EN 14635:2010
Steklena embalaža - Kronsko grlo 26 H 126 - Mere (ISO 12822:2020)
Glass packaging - 26 H 126 crown finish - Dimensions (ISO 12822:2020)
Verpackungen aus Glas - Kronenmundstück 26 H 126 - Maße (ISO 12822:2020)
Emballages en verre - Bague couronne 26 H 126 - Dimensions (ISO 12822:2020)
Ta slovenski standard je istoveten z: EN ISO 12822:2020
ICS:
55.100 Steklenice. Lonci. Kozarci Bottles. Pots. Jars
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 12822
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2020
EUROPÄISCHE NORM
ICS 55.100 Supersedes EN 14635:2010
English Version
Glass packaging - 26 H 126 crown finish - Dimensions (ISO
12822:2020)
Emballages en verre - Bague couronne 26 H 126 - Verpackungen aus Glas - Kronenmundstück 26 H 126 -
Dimensions (ISO 12822:2020) Maße (ISO 12822:2020)
This European Standard was approved by CEN on 19 March 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12822:2020 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 12822:2020) has been prepared by Technical Committee ISO/TC 63 “Glass
containers” in collaboration with Technical Committee CEN/TC 261 “Packaging” the secretariat of
which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2020, and conflicting national standards shall
be withdrawn at the latest by October 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 14635:2010.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 12822:2020 has been approved by CEN as EN ISO 12822:2020 without any modification.

INTERNATIONAL ISO
STANDARD 12822
Second edition
2020-03
Glass packaging — 26 H 126 crown
finish — Dimensions
Emballages en verre — Bague couronne 26 H 126 — Dimensions
Reference number
ISO 12822:2020(E)
©
ISO 2020
ISO 12822:2020(E)
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

ISO 12822:2020(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Dimensions . 1
Bibliography . 6
© I
...