SIST EN 301 489-1 V2.1.1:2017
(Main)ElectroMagnetic Compatibility (EMC) standard for radio equipment and services - Harmonised Standard covering the essential requirements of article 3.1(b) of the Directive 2014/53/EU and the essential requirements of article 6 of the Directive 2014/30/EU - Part 1: Common technical requirements
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services - Harmonised Standard covering the essential requirements of article 3.1(b) of the Directive 2014/53/EU and the essential requirements of article 6 of the Directive 2014/30/EU - Part 1: Common technical requirements
The present document covers the essential requirements of article 3.1(b) of Directive 2014/53/EU [i.1] and article 6 of
Directive 2014/30/EU [i.2] for radio equipment and associated ancillary equipment, excluding broadcast receivers, in
respect of ElectroMagnetic Compatibility (EMC).
Where the present document is being used to evaluate the EMC performance of "combined radio and non-radio
equipment", ETSI EG 203 367 [i.3] provides guidance upon the application of the various harmonised standards,
including the present document, that could potentially apply to such equipment.
Product dependent arrangements necessary to perform the EMC tests on dedicated types of radio communications
equipment, and the assessment of test results, are detailed in the appropriate relevant radio technology parts of ETSI
EN 301 489 series [i.13].
The present document, together with the relevant radio technology part, where required, specifies the applicable EMC
tests, the methods of measurement, the limits and the performance criteria for radio equipment and associated ancillary
equipment. In case of differences (for instance concerning special conditions, definitions, abbreviations) between part 1
of ETSI EN 301 489 series [i.13] and the relevant radio technology part of ETSI EN 301 489 series [i.13], the relevant
radio technology part takes precedence.
Technical specifications related to the antenna port of radio equipment and radiated emissions from the enclosure port
of radio equipment and combinations of radio and associated ancillary equipment are not included in the present
document. Such technical specifications are normally found in the relevant product standards for the effective use of the
radio spectrum.
The environment classification used in the present document refers to the environment classification used in:
• CENELEC EN 61000-6-3 [i.4] and CENELEC EN 61000-6-1 [i.5] for the residential, commercial and light
industrial environment; or
• CENELEC EN 61000-6-2 [i.15] and CENELEC EN 61000-6-4 [i.14] for the industrial environment; or
• ETSI TR 101 651 [i.6] for the telecommunication centre environment; or
• ISO 7637-2 [8] for the vehicular environment.
The EMC requirements have been selected to ensure an adequate level of compatibility for equipment intended to be
used in the environments mentioned above. The levels, however, do not cover extreme cases which may occur in any
location but with low probability of occurrence.
The present document may not cover those cases where a potential source of interference which is producing
individually repeated transient phenomena or a continuous phenomenon is permanently present, e.g. a radar or
broadcast site in the near vicinity. In such a case it may be necessary to use special protection applied to either the
source of interference or the interfered part or both.
Where none of the existing specific relevant radio technology radio parts covers the required conditions for a particular
radio equipment/service e.g. in case of the initial introduction of a new radio service or a special application, the present
document can be used for the purposes of testing to the EMC requirements set out in the present document.
In all cases where a radio product falls within the scope of a specific relevant radio technology radio part of the
standard, the relevant radio technology part takes precedence.
Compliance of radio equipment to the requirements of the present document does not signify compliance to any
requirements related to spectrum management or to the use of the equipment (licensing requirements).
Compliance to the requirements of the present document does not signify compliance to any safety requirements.
However, it is the responsibility of the assessor of the equipment to record in the test report any observations regarding
the test sample becoming dangerous or unsafe as a result of the application of the tests called for in the present
document.
Standard elektromagnetne združljivosti (EMC) za radijsko opremo in storitve - Harmonizirani standard, ki zajema bistvene zahteve člena 3.1(b) direktive 2014/53/EU in bistvene zahteve člena 6 direktive 2014/30/EU - 1. del: Splošne tehnične zahteve
Ta dokument zajema bistvene zahteve člena 3.1(b) direktive 2014/53/EU [i.1] in člena 6 direktive 2014/30/EU [i.2] za radijsko opremo in povezano pomožno opremo, razen sprejemnikov, v zvezi z elektromagnetno združljivostjo (EMC).
Kjer se ta dokument uporablja za vrednotenje delovanja elektromagnetne združljivosti »združene radijske in neradijske opreme«, so v dokumentu ETSI EG 203 367 [i.3] podana navodila glede uporabe različnih harmoniziranih standardov, vključno s tem dokumentom, ki se lahko uporabljajo za takšno opremo.
Ureditve, odvisne od izdelkov, ki so potrebne za izvajanje preskusov elektromagnetne združljivosti na ustreznih vrstah opreme za radijske komunikacije, in vrednotenje rezultatov preskusov so podrobneje opisani v ustreznih delih skupine standardov ETSI EN 301 489 [i.13], ki se nanašajo na zadevno radijsko tehnologijo.
Kjer se to zahteva, ta dokument in del, ki se nanaša na zadevno radijsko tehnologijo, določata ustrezne preskuse elektromagnetne združljivosti, merilne metode, omejitve ter merila učinkovitosti za radijsko opremo in povezano pomožno opremo. Če se 1. del skupine standardov ETSI EN 301 489 [i.13] in del skupine standardov ETSI EN 301 489 [i.13], ki se nanaša na zadevno radijsko tehnologijo, razlikujeta (na primer glede posebnih pogojev, opredelitev, kratic), ima prednost del, ki se nanaša na zadevno radijsko tehnologijo.
Ta dokument ne vključuje tehničnih specifikacij v zvezi z antenskim vhodom radijske opreme in sevanjem iz vhoda na ohišju radijske opreme ter kombinacijami radijske opreme in povezane pomožne opreme. Take tehnične specifikacije so običajno navedene v ustreznih standardih za izdelek na področju učinkovite uporabe radijskega spektra.
Okoljska razvrstitev iz tega dokumenta se nanaša na okoljsko razvrstitev iz:
• CENELEC EN 61000-6-3 [i.4] in CENELEC EN 61000-6-1 [i.5] za stanovanjska, poslovna in manj zahtevna industrijska okolja; ali
• CENELEC EN 61000-6-2 [i.15] in CENELEC EN 61000-6-4 [i.14] za industrijska okolja; ali
• ETSI TR 101 651 [i.6] za okolja telekomunikacijskih centrov; ali
• ISO 7637-2 [8] za avtomobilska okolja.
Zahteve za elektromagnetno združljivost so namenjene za zagotovitev ustrezne ravni združljivosti opreme, namenjene za uporabo v zgoraj navedenih okoljih. Vendar ravni ne zajemajo izjemnih primerov, do katerih lahko pride na kateri koli lokaciji, čeprav je to malo verjetno.
Ta dokument morda ne obravnava primerov, ko je trajno prisoten možen vir motenj, ki ustvarja individualno ponavljajoče se prehodne pojave ali stalen pojav, npr. radar ali oddajno mesto v bližini. V takem primeru je morda treba zagotoviti posebno zaščito za vir motenj ali moten del ali oba.
Če nobeden od obstoječih zadevnih delov radijske tehnologije ne zajema zahtevanih pogojev za določeno radijsko opremo/storitev, npr. v primeru začetne uvedbe nove radijske storitve ali posebne vrste uporabe, se ta dokument lahko uporablja za namene preskušanja zahtev glede elektromagnetne združljivosti iz tega dokumenta.
V vseh primerih, pri katerih radijski izdelek spada na področje uporabe določenega zadevnega dela radijske tehnologije v okviru standarda, prevlada zadevni del radijske tehnologije.
Če radijska oprema izpolnjuje zahteve tega dokumenta, to ne pomeni, da izpolnjuje kakršne koli zahteve na področju upravljanja spektra ali uporabe opreme (zahteve za izdajanje dovoljenj).
Izpolnjevanje zahtev iz tega dokumenta ne pomeni izpolnjevanja kakršnih koli varnostnih zahtev.
Vendar ocenjevalec opreme mora v poročilu o preskusu navesti morebitno ugotovitev, da je preskusni vzorec postal nevaren zaradi izvedbe preskusov iz tega dokumenta.
General Information
Buy Standard
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.LUHNWLYHElectroMagnetic Compatibility (EMC) standard for radio equipment and services - Harmonised Standard covering the essential requirements of article 3.1(b) of the Directive 2014/53/EU and the essential requirements of article 6 of the Directive 2014/30/EU - Part 1: Common technical requirements33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.01Radijske komunikacije na splošnoRadiocommunications in generalICS:Ta slovenski standard je istoveten z:ETSI EN 301 489-1 V2.1.1 (2017-02)SIST EN 301 489-1 V2.1.1:2017en01-april-2017SIST EN 301 489-1 V2.1.1:2017SLOVENSKI
STANDARD
SIST EN 301 489-1 V2.1.1:2017
ETSI EN 301 489-1 V2.1.1 (2017-02) ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU and the essential requirements of article 6 of Directive 2014/30/EU
HARMONISED EUROPEAN STANDARD SIST EN 301 489-1 V2.1.1:2017
ETSI ETSI EN 301 489-1 V2.1.1 (2017-02) 2
Reference REN/ERM-EMC-333 Keywords EMC, harmonised standard, radio ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice The present document can be downloaded from: http://www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https://portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2017. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 301 489-1 V2.1.1:2017
ETSI ETSI EN 301 489-1 V2.1.1 (2017-02) 3 Contents Intellectual Property Rights . 6 Foreword . 6 Modal verbs terminology . 8 1 Scope . 9 2 References . 10 2.1 Normative references . 10 2.2 Informative references . 11 3 Definitions, symbols and abbreviations . 12 3.1 Definitions . 12 3.2 Symbols . 15 3.3 Abbreviations . 15 4 Test conditions . 16 4.1 General . 16 4.2 Arrangements for test signals . 16 4.2.0 General . 16 4.2.1 Arrangements for test signals at the input of transmitters . 16 4.2.2 Arrangements for test signals at the RF output of transmitters . 16 4.2.3 Arrangements for test signals at the RF input of receivers . 17 4.2.4 Arrangements for test signals at the output of receivers . 17 4.2.5 Arrangements for testing transmitter and receiver together (as a system) . 17 4.3 RF exclusion band of radio equipment . 18 4.3.1 General . 18 4.3.2 Exclusion band for transmitters or the transmitter part of transceivers. 18 4.3.2.1 General . 18 4.3.2.2 Channelized Equipment . 18 4.3.2.3 Non-Channelized Equipment . 18 4.3.3 Exclusion band for receivers or the receiver part of transceivers . 18 4.3.3.1 Applicability. 18 4.3.3.2 Channelized Equipment . 18 4.3.3.3 Non-Channelized Equipment . 19 4.4 Narrow band responses of receivers or receivers which are part of transceivers . 19 4.5 Normal test modulation . 19 5 Performance assessment . 20 5.1 General . 20 5.2 Equipment which can provide a continuous communication link . 20 5.3 Equipment which does not provide a continuous communication link . 21 5.4 Ancillary equipment . 21 5.5 Equipment classification . 21 6 Performance criteria . 22 6.0 Introduction . 22 6.1 Performance criteria for continuous phenomena applied to transmitters and receivers . 22 6.2 Performance criteria for transient phenomena applied to transmitters and receivers . 22 6.3 Performance criteria for equipment which does not provide a continuous communication link . 23 6.4 Performance criteria for ancillary equipment tested on a stand alone basis . 23 7 Applicability overview tables . 23 7.0 Introduction . 23 7.1 EMC emission . 24 7.2 Immunity . 24 8 Methods of measurement and limits for EMC emissions . 25 8.1 Test configuration. 25 8.2 Enclosure port of ancillary equipment measured on a stand alone basis . 25 8.2.1 General . 25 SIST EN 301 489-1 V2.1.1:2017
ETSI ETSI EN 301 489-1 V2.1.1 (2017-02) 4 8.2.2 Test method . 26 8.2.3 Limits . 26 8.3 DC power input/output ports . 26 8.3.1 General . 26 8.3.2 Test method . 26 8.3.3 Limits . 26 8.4 AC mains power input/output ports . 27 8.4.1 General . 27 8.4.2 Test method . 27 8.4.3 Limits . 27 8.4.3.1 General . 27 8.4.3.2 AC Power port used for power supply only . 28 8.4.3.3 AC power input port also used for PLC Communications . 28 8.5 Harmonic current emissions (AC mains input port) . 28 8.6 Voltage fluctuations and flicker (AC mains input port) . 28 8.7 Wired network ports . 28 8.7.1 General . 28 8.7.2 Test method . 28 8.7.3 Limits . 28 9 Test methods and levels for immunity tests . 29 9.1 Test configuration. 29 9.2 Radio frequency electromagnetic field (80 MHz to 6 000 MHz) . 29 9.2.1 General . 29 9.2.2 Test method . 29 9.2.3 Performance criteria . 30 9.3 Electrostatic discharge . 30 9.3.1 General . 30 9.3.2 Test method . 30 9.3.3 Performance criteria . 30 9.4 Fast transients, common mode . 31 9.4.1 General . 31 9.4.2 Test method . 31 9.4.3 Performance criteria . 31 9.5 Radio frequency, common mode . 31 9.5.1 General . 31 9.5.2 Test method . 32 9.5.3 Performance criteria . 32 9.6 Transients and surges in the vehicular environment . 32 9.6.1 General . 32 9.6.2 Test method . 33 9.6.3 Performance criteria . 33 9.7 Voltage dips and interruptions . 33 9.7.1 General . 33 9.7.2 Test method . 33 9.7.3 Performance criteria . 33 9.8 Surges . 34 9.8.1 General . 34 9.8.2 Test method . 34 9.8.2.0 General . 34 9.8.2.1 Test method for wired network ports directly connected to outdoor cables . 34 9.8.2.2 Test method for wired network ports connected to indoor cables . 35 9.8.2.3 Test method for mains ports . 35 9.8.3 Performance criteria . 35 Annex A (informative): Relationship between the present document and the essential requirements of Directive 2014/53/EU and Directive 2014/30/EU . 36 A.1 Relationship between the present document and the essential requirements of Directive 2014/53/EU . 36 A.2 Relationship between the present document and the essential requirements of Directive 2014/30/EU . 37 SIST EN 301 489-1 V2.1.1:2017
ETSI ETSI EN 301 489-1 V2.1.1 (2017-02) 5 Annex B (normative): Application of harmonised EMC standards to multi-radio and multi-standard-radio equipment . 39 B.1 Introduction . 39 B.2 Multi-radio equipment capable of independent transmission. 39 B.3 Multi-radio equipment and multi-standard-radio equipment not capable of independent transmission . 39 B.4 Multi-radio equipment comprising of numerous identical radio transmitters . 39 Annex C (informative): Bibliography . 40 Annex D (informative): Change history . 41 History . 42
SIST EN 301 489-1 V2.1.1:2017
ETSI ETSI EN 301 489-1 V2.1.1 (2017-02) 6 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https://ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.16] to provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC [i.1]. The present document has been prepared to provide one voluntary means of conforming to the essential requirements of Directive 2014/30/EU [i.2] of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast). NOTE: The corresponding Commission's standardisation request to provide one voluntary means of conforming to the essential requirements Directive 2014/30/EU on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast) [i.2] is expected shortly. Once the present document is cited in the Official Journal of the European Union under the Directives, compliance with the normative clauses of the present document given in tables A.1 and A.2 confers, within the limits of the scope of the present document, a presumption of conformity with the corresponding essential requirements of the corresponding Directives and associated EFTA regulations. The present document is part 1 of a multi-part EMC standard for radio equipment which is structured in the following way: • One EMC standard for all radio equipment made up of several parts. • All common technical requirements for EMC emission and immunity have been placed in the common part, which is the present document. • Separate parts have been developed to cover specific product related radio equipment test conditions, test arrangements, performance assessment, performance criteria, etc. • A clause is included in each of the specific radio parts, entitled "special conditions", which is used as appropriate to cover any deviations or additions to the common requirements set out in the present document. The present document is part 1 of a multi-part deliverable covering ElectroMagnetic Compatibility (EMC) standard for radio equipment and services, as identified below: Part 1: "Common technical requirements; Part 2: "Specific conditions for radio paging equipment"; Part 3: "Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz"; Part 4: "Specific conditions for fixed radio links and ancillary equipment"; SIST EN 301 489-1 V2.1.1:2017
ETSI ETSI EN 301 489-1 V2.1.1 (2017-02) 7 Part 5: "Specific conditions for Private land Mobile Radio (PMR) and ancillary equipment (speech and non-speech) and Terrestrial Trunked Radio (TETRA)"; Part 6: "Specific conditions for Digital Enhanced Cordless Telecommunications (DECT) equipment"; Part 9: "Specific conditions for wireless microphones, similar Radio Frequency (RF) audio link equipment, cordless audio and in-ear monitoring devices"; Part 11: "Specific conditions for terrestrial sound broadcasting service transmitters"; Part 12: "Specific conditions for Very Small Aperture Terminal, Satellite Interactive Earth Stations operated in the frequency ranges between 4 GHz and 30 GHz in the Fixed Satellite Service (FSS)"; Part 13: "Specific conditions for Citizens' Band (CB) radio and ancillary equipment (speech and non-speech)"; Part 14: "Specific conditions for analogue and digital terrestrial TV broadcasting service transmitters"; Part 15: "Specific conditions for commercially available amateur radio equipment"; Part 17: "Specific conditions for Broadband Data Transmission Systems"; Part 19: "Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the 1,5 GHz band providing data communications"; Part 20: "Specific conditions for Mobile Earth Stations (MES) used in the Mobile Satellite Services (MSS)"; Part 22: "Specific conditions for ground based VHF aeronautical mobile and fixed radio equipment"; Part 27: "Specific conditions for Ultra Low Power Active Medical Implants (ULP-AMI) and related peripheral devices (ULP-AMI-P)"; Part 28: "Specific conditions for wireless digital video links"; Part 29: "Specific conditions for Medical Data Service Devices (MEDS) operating in the 401 MHz to 402 MHz and 405 MHz to 406 MHz bands"; Part 31: "Specific conditions for equipment in the 9 kHz to 315 kHz band for Ultra Low Power Active Medical Implants (ULP-AMI) and related peripheral devices (ULP-AMI-P)"; Part 33: "Specific conditions for Ultra Wide Band (UWB) devices"; Part 34: "Specific conditions for External Power Supply (EPS) for mobile phones"; Part 35: "Specific requirements for Low Power Active Medical Implants (LP-AMI) operating in the 2 483,5 MHz to 2 500 MHz bands"; Part 50: "Specific conditions for Cellular Communication Base Station (BS), repeater and ancillary equipment"; Part 51: "Specific conditions for Automotive, Ground based Vehicles and Surveillance Radar Devices using 24,05 GHz to 24,25 GHz, 24,05 GHz to 24,5 GHz, 76 GHz to 77 GHz and 77 GHz to 81 GHz"; Part 52: "Specific conditions for Cellular Communication Mobile and portable (UE) radio and ancillary equipment". NOTE: Parts 7, 8, 10, 16, 18, 23, 24, 25, 26 and 32 of this multi-part deliverable have been removed from this listing as they do not cover the new Directives in force, Directive 2014/53/EU [i.1] and Directive 2014/30/EU [i.2].
SIST EN 301 489-1 V2.1.1:2017
ETSI ETSI EN 301 489-1 V2.1.1 (2017-02) 8 National transposition dates Date of adoption of this EN: 23 January 2017 Date of latest announcement of this EN (doa): 30 April 2017 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
31 October 2017 Date of withdrawal of any conflicting National Standard (dow): 31 October 2018
Modal verbs terminology In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and "cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). "must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation. SIST EN 301 489-1 V2.1.1:2017
ETSI ETSI EN 301 489-1 V2.1.1 (2017-02) 9 1 Scope The present document covers the essential requirements of article 3.1(b) of Directive 2014/53/EU [i.1] and article 6 of Directive 2014/30/EU [i.2] for radio equipment and associated ancillary equipment, excluding broadcast receivers, in respect of ElectroMagnetic Compatibility (EMC). Where the present document is being used to evaluate the EMC performance of "combined radio and non-radio equipment", ETSI EG 203 367 [i.3] provides guidance upon the application of the various harmonised standards, including the present document, that could potentially apply to such equipment. Product dependent arrangements necessary to per
...
ETSI EN 301 489-1 V2.1.1 (2017-02)
HARMONISED EUROPEAN STANDARD
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 1: Common technical requirements;
Harmonised Standard covering the essential requirements
of article 3.1(b) of Directive 2014/53/EU and the essential
requirements of article 6 of Directive 2014/30/EU
---------------------- Page: 1 ----------------------
2 ETSI EN 301 489-1 V2.1.1 (2017-02)
Reference
REN/ERM-EMC-333
Keywords
EMC, harmonised standard, radio
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2017.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 ETSI EN 301 489-1 V2.1.1 (2017-02)
Contents
Intellectual Property Rights . 6
Foreword . 6
Modal verbs terminology . 8
1 Scope . 9
2 References . 10
2.1 Normative references . 10
2.2 Informative references . 11
3 Definitions, symbols and abbreviations . 12
3.1 Definitions . 12
3.2 Symbols . 15
3.3 Abbreviations . 15
4 Test conditions . 16
4.1 General . 16
4.2 Arrangements for test signals . 16
4.2.0 General . 16
4.2.1 Arrangements for test signals at the input of transmitters . 16
4.2.2 Arrangements for test signals at the RF output of transmitters . 16
4.2.3 Arrangements for test signals at the RF input of receivers . 17
4.2.4 Arrangements for test signals at the output of receivers . 17
4.2.5 Arrangements for testing transmitter and receiver together (as a system) . 17
4.3 RF exclusion band of radio equipment . 18
4.3.1 General . 18
4.3.2 Exclusion band for transmitters or the transmitter part of transceivers. 18
4.3.2.1 General . 18
4.3.2.2 Channelized Equipment . 18
4.3.2.3 Non-Channelized Equipment . 18
4.3.3 Exclusion band for receivers or the receiver part of transceivers . 18
4.3.3.1 Applicability. 18
4.3.3.2 Channelized Equipment . 18
4.3.3.3 Non-Channelized Equipment . 19
4.4 Narrow band responses of receivers or receivers which are part of transceivers . 19
4.5 Normal test modulation . 19
5 Performance assessment . 20
5.1 General . 20
5.2 Equipment which can provide a continuous communication link . 20
5.3 Equipment which does not provide a continuous communication link . 21
5.4 Ancillary equipment . 21
5.5 Equipment classification . 21
6 Performance criteria . 22
6.0 Introduction . 22
6.1 Performance criteria for continuous phenomena applied to transmitters and receivers . 22
6.2 Performance criteria for transient phenomena applied to transmitters and receivers . 22
6.3 Performance criteria for equipment which does not provide a continuous communication link . 23
6.4 Performance criteria for ancillary equipment tested on a stand alone basis . 23
7 Applicability overview tables . 23
7.0 Introduction . 23
7.1 EMC emission . 24
7.2 Immunity . 24
8 Methods of measurement and limits for EMC emissions . 25
8.1 Test configuration. 25
8.2 Enclosure port of ancillary equipment measured on a stand alone basis . 25
8.2.1 General . 25
ETSI
---------------------- Page: 3 ----------------------
4 ETSI EN 301 489-1 V2.1.1 (2017-02)
8.2.2 Test method . 26
8.2.3 Limits . 26
8.3 DC power input/output ports . 26
8.3.1 General . 26
8.3.2 Test method . 26
8.3.3 Limits . 26
8.4 AC mains power input/output ports . 27
8.4.1 General . 27
8.4.2 Test method . 27
8.4.3 Limits . 27
8.4.3.1 General . 27
8.4.3.2 AC Power port used for power supply only . 28
8.4.3.3 AC power input port also used for PLC Communications . 28
8.5 Harmonic current emissions (AC mains input port) . 28
8.6 Voltage fluctuations and flicker (AC mains input port) . 28
8.7 Wired network ports . 28
8.7.1 General . 28
8.7.2 Test method . 28
8.7.3 Limits . 28
9 Test methods and levels for immunity tests . 29
9.1 Test configuration. 29
9.2 Radio frequency electromagnetic field (80 MHz to 6 000 MHz) . 29
9.2.1 General . 29
9.2.2 Test method . 29
9.2.3 Performance criteria . 30
9.3 Electrostatic discharge . 30
9.3.1 General . 30
9.3.2 Test method . 30
9.3.3 Performance criteria . 30
9.4 Fast transients, common mode . 31
9.4.1 General . 31
9.4.2 Test method . 31
9.4.3 Performance criteria . 31
9.5 Radio frequency, common mode . 31
9.5.1 General . 31
9.5.2 Test method . 32
9.5.3 Performance criteria . 32
9.6 Transients and surges in the vehicular environment . 32
9.6.1 General . 32
9.6.2 Test method . 33
9.6.3 Performance criteria . 33
9.7 Voltage dips and interruptions . 33
9.7.1 General . 33
9.7.2 Test method . 33
9.7.3 Performance criteria . 33
9.8 Surges . 34
9.8.1 General . 34
9.8.2 Test method . 34
9.8.2.0 General . 34
9.8.2.1 Test method for wired network ports directly connected to outdoor cables . 34
9.8.2.2 Test method for wired network ports connected to indoor cables . 35
9.8.2.3 Test method for mains ports . 35
9.8.3 Performance criteria . 35
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU and Directive 2014/30/EU . 36
A.1 Relationship between the present document and the essential requirements of Directive
2014/53/EU . 36
A.2 Relationship between the present document and the essential requirements of Directive
2014/30/EU . 37
ETSI
---------------------- Page: 4 ----------------------
5 ETSI EN 301 489-1 V2.1.1 (2017-02)
Annex B (normative): Application of harmonised EMC standards to multi-radio and multi-
standard-radio equipment . 39
B.1 Introduction . 39
B.2 Multi-radio equipment capable of independent transmission. 39
B.3 Multi-radio equipment and multi-standard-radio equipment not capable of independent
transmission . 39
B.4 Multi-radio equipment comprising of numerous identical radio transmitters . 39
Annex C (informative): Bibliography . 40
Annex D (informative): Change history . 41
History . 42
ETSI
---------------------- Page: 5 ----------------------
6 ETSI EN 301 489-1 V2.1.1 (2017-02)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM).
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.16] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.1].
The present document has been prepared to provide one voluntary means of conforming to the essential requirements of
Directive 2014/30/EU [i.2] of the European Parliament and of the Council of 26 February 2014 on the harmonisation of
the laws of the Member States relating to electromagnetic compatibility (recast).
NOTE: The corresponding Commission's standardisation request to provide one voluntary means of conforming
to the essential requirements Directive 2014/30/EU on the harmonisation of the laws of the Member
States relating to electromagnetic compatibility (recast) [i.2] is expected shortly.
Once the present document is cited in the Official Journal of the European Union under the Directives, compliance with
the normative clauses of the present document given in tables A.1 and A.2 confers, within the limits of the scope of the
present document, a presumption of conformity with the corresponding essential requirements of the corresponding
Directives and associated EFTA regulations.
The present document is part 1 of a multi-part EMC standard for radio equipment which is structured in the following
way:
• One EMC standard for all radio equipment made up of several parts.
• All common technical requirements for EMC emission and immunity have been placed in the common part,
which is the present document.
• Separate parts have been developed to cover specific product related radio equipment test conditions, test
arrangements, performance assessment, performance criteria, etc.
• A clause is included in each of the specific radio parts, entitled "special conditions", which is used as
appropriate to cover any deviations or additions to the common requirements set out in the present document.
The present document is part 1 of a multi-part deliverable covering ElectroMagnetic Compatibility (EMC) standard for
radio equipment and services, as identified below:
Part 1: "Common technical requirements;
Part 2: "Specific conditions for radio paging equipment";
Part 3: "Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and
246 GHz";
Part 4: "Specific conditions for fixed radio links and ancillary equipment";
ETSI
---------------------- Page: 6 ----------------------
7 ETSI EN 301 489-1 V2.1.1 (2017-02)
Part 5: "Specific conditions for Private land Mobile Radio (PMR) and ancillary equipment (speech and
non-speech) and Terrestrial Trunked Radio (TETRA)";
Part 6: "Specific conditions for Digital Enhanced Cordless Telecommunications (DECT) equipment";
Part 9: "Specific conditions for wireless microphones, similar Radio Frequency (RF) audio link equipment,
cordless audio and in-ear monitoring devices";
Part 11: "Specific conditions for terrestrial sound broadcasting service transmitters";
Part 12: "Specific conditions for Very Small Aperture Terminal, Satellite Interactive Earth Stations operated in the
frequency ranges between 4 GHz and 30 GHz in the Fixed Satellite Service (FSS)";
Part 13: "Specific conditions for Citizens' Band (CB) radio and ancillary equipment (speech and non-speech)";
Part 14: "Specific conditions for analogue and digital terrestrial TV broadcasting service transmitters";
Part 15: "Specific conditions for commercially available amateur radio equipment";
Part 17: "Specific conditions for Broadband Data Transmission Systems";
Part 19: "Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the 1,5 GHz band
providing data communications";
Part 20: "Specific conditions for Mobile Earth Stations (MES) used in the Mobile Satellite Services (MSS)";
Part 22: "Specific conditions for ground based VHF aeronautical mobile and fixed radio equipment";
Part 27: "Specific conditions for Ultra Low Power Active Medical Implants (ULP-AMI) and related peripheral
devices (ULP-AMI-P)";
Part 28: "Specific conditions for wireless digital video links";
Part 29: "Specific conditions for Medical Data Service Devices (MEDS) operating in the 401 MHz to 402 MHz
and 405 MHz to 406 MHz bands";
Part 31: "Specific conditions for equipment in the 9 kHz to 315 kHz band for Ultra Low Power Active Medical
Implants (ULP-AMI) and related peripheral devices (ULP-AMI-P)";
Part 33: "Specific conditions for Ultra Wide Band (UWB) devices";
Part 34: "Specific conditions for External Power Supply (EPS) for mobile phones";
Part 35: "Specific requirements for Low Power Active Medical Implants (LP-AMI) operating in the 2 483,5 MHz
to 2 500 MHz bands";
Part 50: "Specific conditions for Cellular Communication Base Station (BS), repeater and ancillary equipment";
Part 51: "Specific conditions for Automotive, Ground based Vehicles and Surveillance Radar Devices using
24,05 GHz to 24,25 GHz, 24,05 GHz to 24,5 GHz, 76 GHz to 77 GHz and 77 GHz to 81 GHz";
Part 52: "Specific conditions for Cellular Communication Mobile and portable (UE) radio and ancillary
equipment".
NOTE: Parts 7, 8, 10, 16, 18, 23, 24, 25, 26 and 32 of this multi-part deliverable have been removed from this
listing as they do not cover the new Directives in force, Directive 2014/53/EU [i.1] and Directive
2014/30/EU [i.2].
ETSI
---------------------- Page: 7 ----------------------
8 ETSI EN 301 489-1 V2.1.1 (2017-02)
National transposition dates
Date of adoption of this EN: 23 January 2017
Date of latest announcement of this EN (doa): 30 April 2017
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 October 2017
Date of withdrawal of any conflicting National Standard (dow): 31 October 2018
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 8 ----------------------
9 ETSI EN 301 489-1 V2.1.1 (2017-02)
1 Scope
The present document covers the essential requirements of article 3.1(b) of Directive 2014/53/EU [i.1] and article 6 of
Directive 2014/30/EU [i.2] for radio equipment and associated ancillary equipment, excluding broadcast receivers, in
respect of ElectroMagnetic Compatibility (EMC).
Where the present document is being used to evaluate the EMC performance of "combined radio and non-radio
equipment", ETSI EG 203 367 [i.3] provides guidance upon the application of the various harmonised standards,
including the present document, that could potentially apply to such equipment.
Product dependent arrangements necessary to perform the EMC tests on dedicated types of radio communications
equipment, and the assessment of test results, are detailed in the appropriate relevant radio technology parts of ETSI
EN 301 489 series [i.13].
The present document, together with the relevant radi
...
Final draft ETSI EN 301 489-1 V2.1.1 (2016-11)
HARMONISED EUROPEAN STANDARD
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 1: Common technical requirements;
Harmonised Standard covering the essential requirements
of article 3.1(b) of Directive 2014/53/EU and the essential
requirements of article 6 of Directive 2014/30/EU
---------------------- Page: 1 ----------------------
2 Final draft ETSI EN 301 489-1 V2.1.1 (2016-11)
Reference
REN/ERM-EMC-333
Keywords
EMC, harmonised standard, radio
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2016.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 Final draft ETSI EN 301 489-1 V2.1.1 (2016-11)
Contents
Intellectual Property Rights . 6
Foreword . 6
Modal verbs terminology . 8
1 Scope . 9
2 References . 10
2.1 Normative references . 10
2.2 Informative references . 11
3 Definitions, symbols and abbreviations . 12
3.1 Definitions . 12
3.2 Symbols . 15
3.3 Abbreviations . 15
4 Test conditions . 16
4.1 General . 16
4.2 Arrangements for test signals . 16
4.2.0 General . 16
4.2.1 Arrangements for test signals at the input of transmitters . 16
4.2.2 Arrangements for test signals at the RF output of transmitters . 16
4.2.3 Arrangements for test signals at the RF input of receivers . 17
4.2.4 Arrangements for test signals at the output of receivers . 17
4.2.5 Arrangements for testing transmitter and receiver together (as a system) . 17
4.3 RF exclusion band of radio equipment . 18
4.3.1 General . 18
4.3.2 Exclusion band for transmitters or the transmitter part of transceivers. 18
4.3.2.1 General . 18
4.3.2.2 Channelized Equipment . 18
4.3.2.3 Non-Channelized Equipment . 18
4.3.3 Exclusion band for receivers or the receiver part of transceivers . 18
4.3.3.1 Applicability. 18
4.3.3.2 Channelized Equipment . 18
4.3.3.3 Non-Channelized Equipment . 19
4.4 Narrow band responses of receivers or receivers which are part of transceivers . 19
4.5 Normal test modulation . 19
5 Performance assessment . 20
5.1 General . 20
5.2 Equipment which can provide a continuous communication link . 20
5.3 Equipment which does not provide a continuous communication link . 21
5.4 Ancillary equipment . 21
5.5 Equipment classification . 21
6 Performance criteria . 22
6.0 Introduction . 22
6.1 Performance criteria for continuous phenomena applied to transmitters and receivers . 22
6.2 Performance criteria for transient phenomena applied to transmitters and receivers . 22
6.3 Performance criteria for equipment which does not provide a continuous communication link . 23
6.4 Performance criteria for ancillary equipment tested on a stand alone basis . 23
7 Applicability overview tables . 23
7.0 Introduction . 23
7.1 EMC emission . 24
7.2 Immunity . 24
8 Methods of measurement and limits for EMC emissions . 25
8.1 Test configuration. 25
8.2 Enclosure port of ancillary equipment measured on a stand alone basis . 25
8.2.1 General . 25
ETSI
---------------------- Page: 3 ----------------------
4 Final draft ETSI EN 301 489-1 V2.1.1 (2016-11)
8.2.2 Test method . 26
8.2.3 Limits . 26
8.3 DC power input/output ports . 26
8.3.1 General . 26
8.3.2 Test method . 26
8.3.3 Limits . 26
8.4 AC mains power input/output ports . 27
8.4.1 General . 27
8.4.2 Test method . 27
8.4.3 Limits . 27
8.4.3.1 General . 27
8.4.3.2 AC Power port used for power supply only . 28
8.4.3.3 AC power input port also used for PLC Communications . 28
8.5 Harmonic current emissions (AC mains input port) . 28
8.6 Voltage fluctuations and flicker (AC mains input port) . 28
8.7 Wired network ports . 28
8.7.1 General . 28
8.7.2 Test method . 28
8.7.3 Limits . 28
9 Test methods and levels for immunity tests . 29
9.1 Test configuration. 29
9.2 Radio frequency electromagnetic field (80 MHz to 6 000 MHz) . 29
9.2.1 General . 29
9.2.2 Test method . 29
9.2.3 Performance criteria . 30
9.3 Electrostatic discharge . 30
9.3.1 General . 30
9.3.2 Test method . 30
9.3.3 Performance criteria . 30
9.4 Fast transients, common mode . 31
9.4.1 General . 31
9.4.2 Test method . 31
9.4.3 Performance criteria . 31
9.5 Radio frequency, common mode . 31
9.5.1 General . 31
9.5.2 Test method . 32
9.5.3 Performance criteria . 32
9.6 Transients and surges in the vehicular environment . 32
9.6.1 General . 32
9.6.2 Test method . 33
9.6.3 Performance criteria . 33
9.7 Voltage dips and interruptions . 33
9.7.1 General . 33
9.7.2 Test method . 33
9.7.3 Performance criteria . 33
9.8 Surges . 34
9.8.1 General . 34
9.8.2 Test method . 34
9.8.2.0 General . 34
9.8.2.1 Test method for wired network ports directly connected to outdoor cables . 34
9.8.2.2 Test method for wired network ports connected to indoor cables . 35
9.8.2.3 Test method for mains ports . 35
9.8.3 Performance criteria . 35
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU and Directive 2014/30/EU . 36
A.1 Relationship between the present document and the essential requirements of Directive
2014/53/EU . 36
A.2 Relationship between the present document and the essential requirements of Directive
2014/30/EU . 37
ETSI
---------------------- Page: 4 ----------------------
5 Final draft ETSI EN 301 489-1 V2.1.1 (2016-11)
Annex B (normative): Application of harmonised EMC standards to multi-radio and multi-
standard-radio equipment . 39
B.1 Introduction . 39
B.2 Multi-radio equipment capable of independent transmission. 39
B.3 Multi-radio equipment and multi-standard-radio equipment not capable of independent
transmission . 39
B.4 Multi-radio equipment comprising of numerous identical radio transmitters . 39
Annex C (informative): Bibliography . 40
Annex D (informative): Change history . 41
History . 42
ETSI
---------------------- Page: 5 ----------------------
6 Final draft ETSI EN 301 489-1 V2.1.1 (2016-11)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This final draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM), and is now submitted for the Vote phase of the
ETSI standards EN Approval Procedure.
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.16] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.1].
The present document has been prepared to provide one voluntary means of conforming to the essential requirements of
Directive 2014/30/EU [i.2] of the European Parliament and of the Council of 26 February 2014 on the harmonisation of
the laws of the Member States relating to electromagnetic compatibility (recast).
NOTE: The corresponding Commission's standardisation request to provide one voluntary means of conforming
to the essential requirements Directive 2014/30/EU on the harmonisation of the laws of the Member
States relating to electromagnetic compatibility (recast) [i.2] is expected shortly.
Once the present document is cited in the Official Journal of the European Union under the Directives, compliance with
the normative clauses of the present document given in tables A.1 and A.2 confers, within the limits of the scope of the
present document, a presumption of conformity with the corresponding essential requirements of the corresponding
Directives and associated EFTA regulations.
The present document is part 1 of a multi-part EMC standard for radio equipment which is structured in the following
way:
• One EMC standard for all radio equipment made up of several parts.
• All common technical requirements for EMC emission and immunity have been placed in the common part,
which is the present document.
• Separate parts have been developed to cover specific product related radio equipment test conditions, test
arrangements, performance assessment, performance criteria, etc.
• A clause is included in each of the specific radio parts, entitled "special conditions", which is used as
appropriate to cover any deviations or additions to the common requirements set out in the present document.
The present document is part 1 of a multi-part deliverable covering ElectroMagnetic Compatibility (EMC) standard for
radio equipment and services, as identified below:
Part 1: "Common technical requirements;
Part 2: "Specific conditions for radio paging equipment";
Part 3: "Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and
246 GHz";
Part 4: "Specific conditions for fixed radio links and ancillary equipment";
ETSI
---------------------- Page: 6 ----------------------
7 Final draft ETSI EN 301 489-1 V2.1.1 (2016-11)
Part 5: "Specific conditions for Private land Mobile Radio (PMR) and ancillary equipment (speech and
non-speech) and Terrestrial Trunked Radio (TETRA)";
Part 6: "Specific conditions for Digital Enhanced Cordless Telecommunications (DECT) equipment";
Part 9: "Specific conditions for wireless microphones, similar Radio Frequency (RF) audio link equipment,
cordless audio and in-ear monitoring devices";
Part 11: "Specific conditions for terrestrial sound broadcasting service transmitters";
Part 12: "Specific conditions for Very Small Aperture Terminal, Satellite Interactive Earth Stations operated in the
frequency ranges between 4 GHz and 30 GHz in the Fixed Satellite Service (FSS)";
Part 13: "Specific conditions for Citizens' Band (CB) radio and ancillary equipment (speech and non-speech)";
Part 14: "Specific conditions for analogue and digital terrestrial TV broadcasting service transmitters";
Part 15: "Specific conditions for commercially available amateur radio equipment";
Part 17: "Specific conditions for Broadband Data Transmission Systems";
Part 19: "Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the 1,5 GHz band
providing data communications";
Part 20: "Specific conditions for Mobile Earth Stations (MES) used in the Mobile Satellite Services (MSS)";
Part 22: "Specific conditions for ground based VHF aeronautical mobile and fixed radio equipment";
Part 27: "Specific conditions for Ultra Low Power Active Medical Implants (ULP-AMI) and related peripheral
devices (ULP-AMI-P)";
Part 28: "Specific conditions for wireless digital video links";
Part 29: "Specific conditions for Medical Data Service Devices (MEDS) operating in the 401 MHz to 402 MHz
and 405 MHz to 406 MHz bands";
Part 31: "Specific conditions for equipment in the 9 kHz to 315 kHz band for Ultra Low Power Active Medical
Implants (ULP-AMI) and related peripheral devices (ULP-AMI-P)";
Part 33: "Specific conditions for Ultra Wide Band (UWB) devices";
Part 34: "Specific conditions for External Power Supply (EPS) for mobile phones";
Part 35: "Specific requirements for Low Power Active Medical Implants (LP-AMI) operating in the 2 483,5 MHz
to 2 500 MHz bands";
Part 50: "Specific conditions for Cellular Communication Base Station (BS), repeater and ancillary equipment";
Part 51: "Specific conditions for Automotive, Ground based Vehicles and Surveillance Radar Devices using
24,05 GHz to 24,25 GHz, 24,05 GHz to 24,5 GHz, 76 GHz to 77 GHz and 77 GHz to 81 GHz";
Part 52: "Specific conditions for Cellular Communication Mobile and portable (UE) radio and ancillary
equipment".
NOTE: Parts 7, 8, 10, 16, 18, 23, 24, 25, 26 and 32 of this multi-part deliverable have been removed from this
listing as they do not cover the new Directives in force, Directive 2014/53/EU [i.1] and Directive
2014/30/EU [i.2].
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa
ETSI
---------------------- Page: 7 ----------------------
8 Final draft ETSI EN 301 489-1 V2.1.1 (2016-11)
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 8 ----------------------
9 Final draft ETSI EN 301 489-1 V2.1.1 (2016-11)
1 Scope
The present document covers the essential requirements of article 3.1(b) of Directive 2014/53/EU [i.1] and article 6 of
Directive 2014/30/EU [i.2] for radio equipment and associated ancillary equipment, excluding broadcast receivers, in
respect of ElectroMagnetic Compatibility (EMC).
Where the present document is being used to evaluate the EMC performance of "combined radio and non-radio
equipment", ETSI EG 203 367 [i.3] provides guidance upon the application of the various harmonised standards,
including the present document, that could potentially apply to such equipment.
Product dependent arrangements necessary to perform the EMC tests on dedicated types of radio communications
equipmen
...
Draft ETSI EN 301 489-1 V2.1.0 (2016-04)
HARMONISED EUROPEAN STANDARD
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Harmonised Standard covering the essential requirements of
article 3.1(b) of the Directive 2014/53/EU and the essential
requirements of article 6 of the Directive 2014/30/EU;
Part 1: Common technical requirements
---------------------- Page: 1 ----------------------
2 Draft ETSI EN 301 489-1 V2.1.0 (2016-04)
Reference
REN/ERM-EMC-333
Keywords
EMC, harmonised standard, radio
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2016.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 Draft ETSI EN 301 489-1 V2.1.0 (2016-04)
Contents
Intellectual Property Rights . 6
Foreword . 6
Modal verbs terminology . 8
1 Scope . 9
2 References . 10
2.1 Normative references . 10
2.2 Informative references . 11
3 Definitions and abbreviations . 12
3.1 Definitions . 12
3.2 Abbreviations . 14
4 Test conditions . 15
4.1 General . 15
4.2 Arrangements for test signals . 15
4.2.0 General . 15
4.2.1 Arrangements for test signals at the input of transmitters . 15
4.2.2 Arrangements for test signals at the RF output of transmitters . 15
4.2.3 Arrangements for test signals at the RF input of receivers . 15
4.2.4 Arrangements for test signals at the output of receivers . 16
4.2.5 Arrangements for testing transmitter and receiver together (as a system) . 16
4.3 RF exclusion band of radio equipment . 16
4.3.1 General . 16
4.3.2 Exclusion band for transmitters or the transmitter part of transceivers. 17
4.3.2.1 General . 17
4.3.2.2 Channelized Equipment . 17
4.3.2.3 Non-Channelized Equipment . 17
4.3.3 Exclusion band for receivers or the receiver part of transceivers . 17
4.3.3.1 Applicability. 17
4.3.3.2 Channelized Equipment . 17
4.3.3.3 Non-Channelized Equipment . 17
4.4 Narrow band responses of receivers or receivers which are part of transceivers . 17
4.5 Normal test modulation . 18
5 Performance assessment . 18
5.1 General . 18
5.2 Equipment which can provide a continuous communication link . 19
5.3 Equipment which does not provide a continuous communication link . 19
5.4 Ancillary equipment . 19
5.5 Equipment classification . 20
6 Performance criteria . 20
6.0 Introduction . 20
6.1 Performance criteria for continuous phenomena applied to transmitters and receivers . 20
6.2 Performance criteria for transient phenomena applied to transmitters and receivers . 21
6.3 Performance criteria for equipment which does not provide a continuous communication link . 21
6.4 Performance criteria for ancillary equipment tested on a stand alone basis . 21
7 Applicability overview tables . 22
7.0 Introduction . 22
7.1 EMC emission . 22
7.2 Immunity . 23
8 Methods of measurement and limits for EMC emissions . 23
8.1 Test configuration. 23
8.2 Enclosure port of ancillary equipment measured on a stand alone basis . 24
8.2.1 General . 24
8.2.2 Test method . 24
ETSI
---------------------- Page: 3 ----------------------
4 Draft ETSI EN 301 489-1 V2.1.0 (2016-04)
8.2.3 Limits . 24
8.3 DC power input/output ports . 24
8.3.1 General . 24
8.3.2 Test method . 24
8.3.3 Limits . 25
8.4 AC mains power input/output ports . 25
8.4.1 General . 25
8.4.2 Test method . 25
8.4.3 Limits . 26
8.4.3.1 General . 26
8.4.3.2 AC Power port used for power supply only . 26
8.4.3.3 AC power input port also used for PLC Communications . 26
8.5 Harmonic current emissions (AC mains input port) . 26
8.6 Voltage fluctuations and flicker (AC mains input port) . 26
8.7 Wired network ports . 26
8.7.1 General . 26
8.7.2 Test method . 26
8.7.3 Limits . 26
9 Test methods and levels for immunity tests . 27
9.1 Test configuration. 27
9.2 Radio frequency electromagnetic field (80 MHz to 6 000 MHz) . 27
9.2.1 General . 27
9.2.2 Test method . 27
9.2.3 Performance criteria . 28
9.3 Electrostatic discharge . 28
9.3.1 General . 28
9.3.2 Test method . 28
9.3.3 Performance criteria . 28
9.4 Fast transients, common mode . 28
9.4.1 General . 28
9.4.2 Test method . 29
9.4.3 Performance criteria . 29
9.5 Radio frequency, common mode . 29
9.5.1 General . 29
9.5.2 Test method . 30
9.5.3 Performance criteria . 30
9.6 Transients and surges in the vehicular environment . 30
9.6.1 General . 30
9.6.2 Test method . 30
9.6.3 Performance criteria . 30
9.7 Voltage dips and interruptions . 31
9.7.1 General . 31
9.7.2 Test method . 31
9.7.3 Performance criteria . 31
9.8 Surges . 32
9.8.1 General . 32
9.8.2 Test method . 32
9.8.2.0 General . 32
9.8.2.1 Test method for wired network ports directly connected to outdoor cables . 32
9.8.2.2 Test method for wired network ports connected to indoor cables . 32
9.8.2.3 Test method for mains ports . 32
9.8.3 Performance criteria . 33
Annex A (normative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU and Directive 2014/30/EU . 34
A.1 Relationship between the present document and the essential requirements of Directive
2014/53/EU . 34
A.2 Relationship between the present document and the essential requirements of Directive
2014/30/EU . 35
ETSI
---------------------- Page: 4 ----------------------
5 Draft ETSI EN 301 489-1 V2.1.0 (2016-04)
Annex B (normative): Application of harmonised EMC standards to multi-radio and multi-
standard-radio equipment . 37
B.1 Introduction . 37
B.2 Multi-radio equipment capable of independent transmission. 37
B.3 Multi-radio equipment and multi-standard-radio equipment not capable of independent
transmission . 37
B.4 Multi-radio equipment comprising of numerous identical radio transmitters . 37
Annex C (informative): Bibliography . 38
History . 39
ETSI
---------------------- Page: 5 ----------------------
6 Draft ETSI EN 301 489-1 V2.1.0 (2016-04)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM), and is now submitted for the combined Public Enquiry and Vote
phase of the ETSI standards EN Approval Procedure.
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.16] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.1].
The present document has been prepared to provide one voluntary means of conforming to the essential requirements of
Directive 2014/30/EU [i.2] of the European Parliament and of the Council of 26 February 2014 on the harmonisation of
the laws of the Member States relating to electromagnetic compatibility (recast).
NOTE: The corresponding Commission's standardisation request to provide one voluntary means of conforming
to the essential requirements Directive 2014/30/EU on the harmonisation of the laws of the Member
States relating to electromagnetic compatibility (recast) [i.2] is expected shortly.
Once the present document is cited in the Official Journal of the European Union under the Directives, compliance with
the normative clauses of the present document given in tables A.1 and A.2 confers, within the limits of the scope of the
present document, a presumption of conformity with the corresponding essential requirements of the corresponding
Directives and associated EFTA regulations.
The present document is part 1 of a multi-part EMC standard for radio equipment which is structured in the following
way:
• One EMC standard for all radio equipment made up of several parts.
• All common technical requirements for EMC emission and immunity have been placed in the common part,
which is the present document.
• Separate parts have been developed to cover specific product related radio equipment test conditions, test
arrangements, performance assessment, performance criteria, etc.
• A clause is included in each of the specific radio parts, entitled "special conditions", which is used as
appropriate to cover any deviations or additions to the common requirements set out in the present document.
The present document is part 1 of a multi-part deliverable covering ElectroMagnetic Compatibility (EMC) standard for
radio equipment and services, as identified below:
Part 1: "Common technical requirements";
Part 2: "Specific conditions for radio paging equipment";
Part 3: "Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and
246 GHz";
Part 4: "Specific conditions for fixed radio links and ancillary equipment";
ETSI
---------------------- Page: 6 ----------------------
7 Draft ETSI EN 301 489-1 V2.1.0 (2016-04)
Part 5: "Specific conditions for Private land Mobile Radio (PMR) and Terrestrial Trunked Radio (TETRA)
equipment and ancillary equipment (speech and non-speech)";
Part 6: "Specific conditions for Digital Enhanced Cordless Telecommunications (DECT) equipment";
Part 7: "Specific conditions for mobile and portable radio and ancillary equipment of digital cellular radio
telecommunications systems (GSM and DCS)";
Part 8: "Specific conditions for GSM base stations";
Part 9: "Specific conditions for wireless microphones, similar Radio Frequency (RF) audio link equipment,
cordless audio and in-ear monitoring devices";
Part 10: "Specific conditions for First (CT1 and CT1+) and Second Generation Cordless Telephone (CT2)
equipment";
Part 11: "Specific conditions for terrestrial sound broadcasting service transmitters";
Part 12: "Specific conditions for Very Small Aperture Terminal, Satellite Interactive Earth Stations operated in the
frequency ranges between 4 GHz and 30 GHz in the Fixed Satellite Service (FSS)";
Part 13: "Specific conditions for Citizens' Band (CB) radio and ancillary equipment (speech and non-speech)";
Part 14: "Specific conditions for analogue and digital terrestrial TV broadcasting service transmitters";
Part 15: "Specific conditions for commercially available amateur radio equipment";
Part 16: "Specific conditions for analogue cellular radio communications equipment, mobile and portable";
Part 17: "Specific conditions for Broadband Data Transmission Systems";
Part 18: "Specific conditions for Terrestrial Trunked Radio (TETRA) equipment";
Part 19: "Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the 1,5 GHz band
providing data communications";
Part 20: "Specific conditions for Mobile Earth Stations (MES) used in the Mobile Satellite Services (MSS)";
Part 22: "Specific conditions for ground based VHF aeronautical mobile and fixed radio equipment";
Part 23: "Specific conditions for IMT-2000 CDMA, Direct Spread (UTRA and E-UTRA) Base Station (BS) radio,
repeater and ancillary equipment";
Part 24: "Specific conditions for IMT-2000 CDMA Direct Spread (UTRA and E-UTRA) for Mobile and portable
(UE) radio and ancillary equipment";
Part 25: "Specific conditions for CDMA 1x spread spectrum Mobile Stations and ancillary equipment";
Part 26: "Specific conditions for CDMA 1x spread spectrum Base Stations, repeaters and ancillary equipment";
Part 27: "Specific conditions for Ultra Low Power Active Medical Implants (ULP-AMI) and related peripheral
devices (ULP-AMI-P)";
Part 28: "Specific conditions for wireless digital video links";
Part 29: "Specific conditions for Medical Data Service Devices (MEDS) operating in the 401 MHz to 402 MHz
and 405 MHz to 406 MHz bands";
Part 31: "Specific conditions for equipment in the 9 kHz to 315 kHz band for Ultra Low Power Active Medical
Implants (ULP-AMI) and related peripheral devices (ULP-AMI-P)";
Part 32: "Specific conditions for Ground and Wall Probing Radar applications";
Part 33: "Specific conditions for Ultra Wide Band (UWB) devices";
Part 34: "Specific conditions for External Power Supply (EPS) for mobile phones";
ETSI
---------------------- Page: 7 ----------------------
8 Draft ETSI EN 301 489-1 V2.1.0 (2016-04)
Part 35: "Specific requirements for Low Power Active Medical Implants (LP-AMI) operating in the 2 483,5 MHz
to 2 500 MHz bands";
Part 50: "Specific conditions for Cellular Communication Base Station (BS), repeater and ancillary equipment";
Part 51: "Specific conditions for Automotive and Surveillance Radar Devices using 24,05 GHz to 24,5 GHz or
76 GHz to 81 GHz";
Part 52: "Specific conditions for mobile and portable (UE) radio and ancillary equipment of digital cellular radio
telecommunications systems (GSM and DCS), IMT-2000 CDMA Direct Spread (UTRA and E-UTRA)
and CDMA 1x spread spectrum".
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 8 ----------------------
9 Draft ETSI EN 301 489-1 V2.1.0 (2016-04)
1 Scope
The present document contains the common requirements for radio equipment and associated ancillary equipment,
excludi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.